Skip to main content

BGP Extension for SRv6 Policy Segment List optimization
draft-liu-idr-sr-segment-list-optimize-06

Document Type Replaced Internet-Draft (idr WG)
Expired & archived
Authors Yisong Liu , Changwang Lin , Ran Chen , Tiankui Zhang , Guanming Zeng
Last updated 2026-05-22 (Latest revision 2026-04-30)
Replaces draft-liu-idr-srv6-segment-list-optimize
Replaced by draft-ietf-idr-sr-policy-admin-flags
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state Candidate for WG Adoption
Document shepherd (None)
IESG IESG state Replaced by draft-ietf-idr-sr-policy-admin-flags
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

In some use cases, an SRv6 policy's segment list ends with the policy endpoint's node SID, and the traffic steered (over policy) already ensures that it is taken to the policy endpoint. In such cases, the SID list can be optimized by excluding the endpoint Node SID when installing the policy. This document specifies a BGP extension to indicate whether the endpoint's node SID needs to be included or excluded when installing the SRv6 Policy. This optimization can improve the forwarding efficiency of data packets when End SID and Service SID are present.

Authors

Yisong Liu
Changwang Lin
Ran Chen
Tiankui Zhang
Guanming Zeng

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)