Industrial Internet Identifier Data Access Protocol (IIIDAP) Query Format
draft-mcd-identifier-access-query-07
This document is an Internet-Draft (I-D).
Anyone may submit an I-D to the IETF.
This I-D is not endorsed by the IETF and has no formal standing in the
IETF standards process.
The information below is for an old version of the document.
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
|
|
---|---|---|---|
Authors | Chendi Ma , Jian Chen , Xiaotian Fan , Meilan Chen , Zhiping Li | ||
Last updated | 2023-06-20 (Latest revision 2022-12-18) | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | I-D Exists | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
draft-mcd-identifier-access-query-07
Internet Engineering Task Force C. Ma Internet Draft J. Chen Intended status: Informational X. Fan Expires: December 21, 2023 M. Chen Z. Li China Academy of Information and Communications Technology June 21, 2023 Industrial Internet Identifier Data Access Protocol (IIIDAP) Query Format draft-mcd-identifier-access-query-07 Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html This Internet-Draft will expire on December 21, 2023. Copyright Notice Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with Ma, et al. Expires December 21, 2023 [Page 1] Internet-Draft Identifier Data Query Protocol June 21, 2023 respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Abstract This document describes uniform patterns to construct HTTP URLs that may be used to retrieve identifier information from Second-Level Nodes (SLN) using "RESTful" web access patterns. These uniform patterns define the query syntax for the Industrial Internet Identifier Data Access Protocol (IIIDAP). Table of Contents 1. Introduction ................................................ 2 2. Conventions used in this document............................ 3 2.1. Acronyms and Abbreviations.............................. 3 3. Path Segment Specification................................... 4 3.1. Lookup Path Segment Specification....................... 4 3.1.1. Identifier Path Segment Specification.............. 4 3.1.2. Name Path Segment Specification.................... 5 3.1.3. Help Path Segment Specification.................... 5 3.2. Search Path Segment Specification....................... 6 3.2.1. Name Search........................................ 6 4. Query Processing ............................................ 6 4.1. Partial String Searching................................ 7 4.2. Associated Records...................................... 7 5. Internationalization Considerations.......................... 8 5.1. Character Encoding Considerations....................... 8 6. Security Considerations...................................... 9 7. IANA Considerations ......................................... 9 8. References .................................................. 9 8.1. Normative References................................... 10 8.2. Informative References................................. 10 1. Introduction This document describes a specification for querying identifier data using a RESTful web service and uniform query patterns. The service is implemented using the Hypertext Transfer Protocol (HTTP) [RFC9110] and the conventions described in [IDENTIFIER-HTTP]. These uniform patterns define the query syntax for the Industrial Internet Identifier Data Access Protocol (IIIDAP). Ma, et al. Expires December 21, 2023 [Page 2] Internet-Draft Identifier Data Query Protocol June 21, 2023 The intent of the patterns described here are to enable queries of the identifier information by identifiers or names. [RFC3986] patterns specified in this document are only applicable to the HTTP [RFC9110] GET and HEAD methods. As described in Section 4.1 of [IDENTIFIER-HTTP], HEAD method can be used to determine, if an object exists (or not) without returning IIIDAP-encoded results; GET method can be used to retrieve detailed results. This document does not describe the results or entities returned from issuing the described URLs with an HTTP GET. The specification of these entities is described in [IDENTIFIER-RESPONSES]. Additionally, resource management, provisioning, and update functions are out of scope for this document. Second-Level Nodes (SLN) have various and divergent methods covering these functions, and it is unlikely a uniform approach is needed for interoperability. HTTP contains mechanisms for servers to authenticate clients and for clients to authenticate servers (from which authorization schemes may be built), so such mechanisms are not described in this document. Policy, provisioning, and processing of authentication and authorization are out of scope for this document as deployments will have to make choices based on local criteria. Supported authentication mechanisms are described in [IDENTIFIER-SECURITY]. 2. Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 2.1. Acronyms and Abbreviations TLN: Top-Level Nodes SLN: Second-Level Nodes ELN: Enterprise-Level Nodes NFC: Unicode Normalization Form C [Unicode-UAX15] NFKC: Unicode Normalization Form KC [Unicode-UAX15] IIIDAP: Industrial Internet Identifier Data Access Protocol Ma, et al. Expires December 21, 2023 [Page 3] Internet-Draft Identifier Data Query Protocol June 21, 2023 REST: Representational State Transfer. The term was first described in a doctoral dissertation [REST]. RESTful: An adjective that describes a service using HTTP and the principles of REST. 3. Path Segment Specification The base URLs used to construct IIIDAP queries are maintained in an TLN described in [IDENTIFIER-AUTHORIZATION]. Queries are formed by retrieving an appropriate base URL from the TLN and appending a path segment specified in either Sections 3.1 or 3.2. Generally, a TLN or other service provider will provide a base URL that identifies the protocol, host, and port, and this will be used as a base URL that the complete URL is resolved against, as per Section 5 of RFC 3986 [RFC3986]. For example, if the base URL is "https://example.com/iiidap/", all IIIDAP query URLs will begin with "https://example.com/iiidap/". The bootstrap registry does not support searching for identifier information through query fields that are not part of a global namespace, including "name" and "help". A base URL for an associated object is required to construct a complete query. 3.1. Lookup Path Segment Specification The resource type path segments for exact match lookup are: o 'identifier': Used to identify the identifier information of SLN or ELN query using a string identifier. o 'name': Used to identify the identifier information of SLN or ELN query using a node (SLN or ELN) name. 3.1.1. Identifier Path Segment Specification Syntax: identifier/<Identifier of SLN or ELN> Take Handle Protocol [RFC3651] as an example, Identifier format of TLN is XX; identifier format of SLD is XX.YY; identifier format of ELD is XX.YY.ZZ; XX, YY, ZZ are UTF-8 encoded character strings, which use any characters from the Unicode 2.0 standard except the ASCII character '/' (0x2F). Therefore, queries for information about identifiers are of the form /identifier/XX.YY/...(for SLN) or /identifier/XX.YY.ZZZ/...(for ELN) Ma, et al. Expires December 21, 2023 [Page 4] Internet-Draft Identifier Data Query Protocol June 21, 2023 For example, identifier of a TLN can be 86; identifier of a SLN can be 86.100; identifier of a TLN can be 86.100.1; Identifiers of TLN/SLN/ELN are usually called identifiers prefix in Industry Internet Identifier System. Identifier suffix is used to identify a product or component in an enterprise. Prefixes and suffixes are joined by backslashes. The prefix and suffix together constitute the globally qualified identity for a product or component. Naming rules of identifier suffix is beyond the scope of this specification. The length of an identifier of must range from 2 to 255 number characters. For example, the following URL would be used to find identifier information for the most specific identifier of a SLN containing 86.100: https://example.com/iiidap/identifier/86.100 The following URL would be used to find identifier information for the most specific identifier of an ELN containing 86.100.1: https://example.com/iiidap/identifier/86.100.1 3.1.2. Name Path Segment Specification Syntax: name/<name of SLN or ELN> Queries for identifier information regarding name of SLN or ELN are of the form /name/XXX/... where XXX is the name of a SLN or ELN. XXX is a string of length from 1 to 255. It can contain non-US-ASCII characters. The detailed requirements for character encoding are specified in Section 5.1. For example, the following URL would be used to find identifier information of the node named "mengniu": https://example.com/iiidap/name/mengniu 3.1.3. Help Path Segment Specification Syntax: help The help path segment can be used to request helpful information (command syntax, terms of service, privacy policy, rate-limiting policy, supported authentication methods, supported extensions, technical support contact, etc.) from an IIIDAP server. The response to "help" should provide basic information that a client needs to Ma, et al. Expires December 21, 2023 [Page 5] Internet-Draft Identifier Data Query Protocol June 21, 2023 successfully use the service. The following URL would be used to return "help" information: https://example.com/iiidap/help 3.2. Search Path Segment Specification Pattern matching semantics are described in Section 4.1. The name path segment for search is: o 'names': Used to identify a SLN or ELN identifier information search using a pattern to match a fully qualified SLN/ELN name. IIIDAP search path segments are formed using a concatenation of the plural form of the object being searched for and an HTTP query string. The HTTP query string is formed using a concatenation of the question mark character ('?', US-ASCII value 0x003F), the JSON object value associated with the object being searched for, the equal sign character ('=', US-ASCII value 0x003D), and the search pattern. Search pattern query processing is described more fully in Section 4. For the name described in this document, the plural object forms are "names". 3.2.1. Name Search Syntax: names?name=<name search pattern> Searches for identifier information by name are specified using this form: names?name=XXXX XXXX is a search pattern representing a name of SLN OR ELN. The following URL would be used to find identifier information for SLN or ELN names matching the "example*" pattern: https://example.com/iiidap/names?name=example* 4. Query Processing Servers indicate the success or failure of query processing by returning an appropriate HTTP response code to the client. Response codes not specifically identified in this document are described in [IDENTIFIER-HTTP]. Ma, et al. Expires December 21, 2023 [Page 6] Internet-Draft Identifier Data Query Protocol June 21, 2023 4.1. Partial String Searching Partial string searching uses the asterisk ('*', US-ASCII value 0x002A) character to match zero or more trailing characters. A character string representing multiple names MAY be concatenated to the end of the search pattern to limit the scope of the search. For example, the search pattern "exam*" will match "example1" and "example2". The search pattern "ex*mple" will match "example". If an asterisk appears in a search string, any label that contains the non-asterisk characters in sequence plus zero or more characters in sequence in place of the asterisk would match. Additional pattern matching processing is beyond the scope of this specification. If a server receives a search request but cannot process the request because it does not support a particular style of partial match searching, it SHOULD return an HTTP 422 (Unprocessable Entity) [RFC4918] response. When returning a 422 error, the server MAY also return an error response body as specified in Section 6 of [IDENTIFIER-RESPONSES] if the requested media type is one that is specified in [IDENTIFIER-HTTP]. Partial matching is not feasible across combinations of Unicode characters because Unicode characters can be combined with each other. Servers SHOULD NOT partially match combinations of Unicode characters where a legal combination is possible. It should be noted, though, that it may not always be possible to detect cases where a character could have been combined with another character, but was not, because characters can be combined in many different ways. Clients should avoid submitting a partial match search of Unicode characters where a Unicode character may be legally combined with another Unicode character or characters. Partial match searches with incomplete combinations of characters where a character must be combined with another character or characters are invalid. Partial match searches with characters that may be combined with another character or characters are to be considered non-combined characters (that is, if character x may be combined with character y but character y is not submitted in the search string, then character x is a complete character and no combinations of character x are to be searched). 4.2. Associated Records Conceptually, any query-matching record in a server's database might be a member of a set of related records, related in some fashion as defined by the server. The entire set ought to be considered as Ma, et al. Expires December 21, 2023 [Page 7] Internet-Draft Identifier Data Query Protocol June 21, 2023 candidates for inclusion when constructing the response. However, the construction of the final response needs to be mindful of privacy and other data-releasing policies when assembling the IIIDAP response set. Note too that due to the nature of searching, there may be a list of query-matching records. Each one of those is subject to being a member of a set as described in the previous paragraph. What is ultimately returned in a response will be the union of all the sets that has been filtered by whatever policies are in place. Note that this model includes arrangements for associated names, including those that are linked by policy mechanisms and names bound together for some other purposes. Note also that returning information that was not explicitly selected by an exact-match lookup, including additional names that match a relatively fuzzy search as well as lists of names that are linked together, may cause privacy issues. Note that there might not be a single, static information return policy that applies to all clients equally. Client identity and associated authorizations can be a relevant factor in determining how broad the response set will be for any particular query. 5. Internationalization Considerations 5.1. Character Encoding Considerations Servers can expect to receive search patterns from clients that contain character strings encoded in different forms supported by HTTP. It is entirely possible to apply filters and normalization rules to search patterns prior to making character comparisons, but this type of processing is more typically needed to determine the validity of registered strings than to match patterns. An IIIDAP client submitting a query string containing non-US-ASCII characters converts such strings into Unicode in UTF-8 encoding. It then performs any local case mapping deemed necessary. Strings are normalized using Normalization Form C (NFC) [Unicode-UAX15]; note that clients might not be able to do this reliably. UTF-8 encoded strings are then appropriately percent-encoded [RFC3986] in the query URL. After parsing any percent-encoding, an IIIDAP server treats each query string as Unicode in UTF-8 encoding. If a string is not valid UTF-8, the server can immediately stop processing the query and return an HTTP 400 (Bad Request) response. Ma, et al. Expires December 21, 2023 [Page 8] Internet-Draft Identifier Data Query Protocol June 21, 2023 For everything else, servers map fullwidth and halfwidth characters to their decomposition equivalents. Servers convert strings to the same coded character set of the target data that is to be looked up or searched, and each string is normalized using the same normalization that was used on the target data. In general, storage of strings as Unicode is RECOMMENDED. For the purposes of comparison, Normalization Form KC (NFKC) [Unicode-UAX15] with case folding is used to maximize predictability and the number of matches. Note the use of case-folded NFKC as opposed to NFC in this case. 6. Security Considerations Security services for the operations specified in this document are described in "Security Services for the Industrial Internet Identifier Data Access Protocol (IIIDAP)" [IDENTIFIER-SECURITY]. Search functionality typically requires more server resources (such as memory, CPU cycles, and network bandwidth) when compared to basic lookup functionality. This increases the risk of server resource exhaustion and subsequent denial of service due to abuse. This risk can be mitigated by developing and implementing controls to restrict search functionality to identified and authorized clients. If those clients behave badly, their search privileges can be suspended or revoked. Rate limiting as described in Section 5.5 of "HTTP Usage in the Industrial Internet Identifier Data Access Protocol (IIIDAP)" [IDENTIFIER-HTTP] can also be used to control the rate of received search requests. Server operators can also reduce their risk by restricting the amount of information returned in response to a search request. Search functionality also increases the privacy risk of disclosing object relationships that might not otherwise be obvious. Note that there might not be a single, static information return policy that applies to all clients equally. Client identity and associated authorizations can be a relevant factor in determining how broad the response set will be for any particular query. 7. IANA Considerations 8. References References to IIIDAP are subject to the latest edition. Ma, et al. Expires December 21, 2023 [Page 9] Internet-Draft Identifier Data Query Protocol June 21, 2023 8.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005, <http://www.rfc-editor.org/info/rfc3986>. [RFC4918] Dusseault, L., Ed., "HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV)", RFC 4918, June 2007, <http://www.rfc-editor.org/info/rfc4918>. [RFC9110] Fielding, R., Ed., M. Nottingham, Ed. and J. Reschke, Ed., " HTTP Semantics", RFC 9110, June 2022, <http://www.rfc-editor.org/info/rfc9110>. [Unicode-UAX15] The Unicode Consortium, "Unicode Standard Annex #15: Unicode Normalization Forms", September 2013, <http://www.unicode.org/reports/tr15/>. 8.2. Informative References [RFC3651] Sun, S., Reilly, S. and L. Lannom, "Handle System Namespace and Service Definition", RFC 3651, November 2003, <http://www.rfc-editor.org/info/rfc3651>. [REST] Fielding, R., "Architectural Styles and the Design of Network-based Software Architectures", Ph.D. Dissertation, University of California, Irvine, 2000, <http://www.ics.uci.edu/~fielding/pubs/dissertation/ fielding_dissertation.pdf>. [IDENTIFIER-HTTP] Ma, C., "HTTP Usage in the Industrial Internet Identifier Data Access Protocol (IIIDAP)", Work in Progress, draft- ma-identifier-access-http, June 2023. [IDENTIFIER-SECURITY] Ma, C., "Security Services for the Industrial Internet Identifier Data Access Protocol (IIIDAP)", Work in Progress, draft-mcd-identifier-access-security, June 2023. Ma, et al. Expires December 21, 2023 [Page 10] Internet-Draft Identifier Data Query Protocol June 21, 2023 [IDENTIFIER-RESPONSES] Ma, C., "JSON Responses for the Industrial Internet Identifier Data Access Protocol (IIIDAP)", Work in Progress, draft-mcd-identifier-access-responce, June 2023. [IDENTIFIER-AUTHORIZATION] Ma, C., "Finding the Authoritative Industrial Internet Identifier Data (IIIDAP) Service", Work in Progress, draft-mcd-identifier-access-authority, June 2023. Ma, et al. Expires December 21, 2023 [Page 11] Internet-Draft Identifier Data Query Protocol June 21, 2023 Authors' Addresses Chendi Ma CAICT No.52 Huayuan North Road, Haidian District Beijing, Beijing, 100191 China Phone: +86 177 1090 9864 Email: machendi@caict.ac.cn Chen Jian CAICT No.52 Huayuan North Road, Haidian District Beijing, Beijing, 100191 China Phone: +86 138 1103 3332 Email: chenjian3@caict.ac.cn Xiaotian Fan CAICT No.52 Huayuan North Road, Haidian District Beijing, Beijing, 100191 China Phone: +86 134 0108 6945 Email: fanxiaotian@caict.ac.cn Meilan Chen CAICT No.52 Huayuan North Road, Haidian District Beijing, Beijing, 100191 China Phone: +86 139 1143 7301 Email: chenmeilan@caict.ac.cn Ma, et al. Expires December 21, 2023 [Page 12] Internet-Draft Identifier Data Query Protocol June 21, 2023 Zhiping Li CAICT No.52 Huayuan North Road, Haidian District Beijing, Beijing, 100191 China Phone: +86 185 1107 1386 Email: lizhiping@caict.ac.cn Ma, et al. Expires December 21, 2023 [Page 13]