Skip to main content

Filtering Adj-Rib-In and Adj-Rib-Out to BMP receivers
draft-pcmy-grow-bmp-adj-ribs-filtered-03

Document Type Replaced Internet-Draft (grow WG)
Expired & archived
Authors Paolo Lucente , Camilo Cardona , Mukul Kumar Srivastava
Last updated 2026-02-25 (Latest revision 2025-09-06)
Replaced by draft-ietf-grow-bmp-adj-ribs-filtered
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state Adopted by a WG
Document shepherd (None)
IESG IESG state Replaced by draft-ietf-grow-bmp-adj-ribs-filtered
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Filtering RIBs in BMP (BGP Monitoring Protocol) can be desirable for several use-cases like, for example, limiting the amount of data a collector station has to process or allow a sender to export only a certain afi/safi of interest. This document defines a light way to inform a collector station that a Adj-Rib-In / Adj-Rib-Out data feed is being filtered.

Authors

Paolo Lucente
Camilo Cardona
Mukul Kumar Srivastava

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)