Skip to main content

Include Routes - Extension to Resource ReserVation Protocol-Traffic Engineering (RSVP-TE)
draft-ali-ccamp-rsvp-te-include-route-02

The information below is for an old version of the document.
Document Type This is an older version of an Internet-Draft whose latest revision is Expired
Authors Zafar Ali , George Swallow , Clarence Filsfils , Ori Gerstel , Kenji Kumaki , Ruediger Kunze
Last updated 2013-01-17 (Latest revision 2012-07-16)
Stream (None)
Formats
Expired & archived
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

There are scenarios that require two or more LSPs or segments of LSPs to follow same route in the network. This document specifies methods to communicate route inclusions along the loose hops during path setup using the Resource ReserVation Protocol-Traffic Engineering (RSVP-TE) protocol.

Authors

Zafar Ali
George Swallow
Clarence Filsfils
Ori Gerstel
Kenji Kumaki
Ruediger Kunze

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)