Skip to main content

Requirements for IPv6 Routers
draft-ali-ipv6rtr-reqs-02

Document Type Replaced Internet-Draft (individual)
Expired & archived
Authors Zaid Ali Kahn , John Jason Brzozowski , Russ White
Last updated 2017-02-18
Replaced by draft-ietf-v6ops-ipv6rtr-reqs
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-v6ops-ipv6rtr-reqs
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

The Internet is not one network, but rather a collection of networks. The interconnected nature of these networks, and the nature of the interconneted systems that make up these networks, is often more fragile than it appears. Perhaps "robust but fragile" is an overstatement, but the actions of each vendor, implementor, and operator in such an interconneted environment can have a major impact on the stability of the overall Internet (as a system). The widespread adoption of IPv6 could, particularly, disrupt network operations, in a way that impacts the entire system. This time of transition is an opportune time to take stock of lessons learned through the operation of large scale networks on IPv4, and consider how to apply these lessons to IPv6. This document provides an overview of the design and architectural decisions that attend IPv6 deployment, and a set of IPv6 requirements for routers, switches, and middleboxes deployed in IPv6 networks. The hope of the editors and contributors is to provide the neccessary background to guide equipment manufacturers, protocol implemenetors, and network operators in effective IPv6 deployment.

Authors

Zaid Ali Kahn
John Jason Brzozowski
Russ White

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)