Building Power-Efficient CoAP Devices for Cellular Networks
draft-arkko-core-cellular-00

 
Document Type Expired Internet-Draft (individual)
Last updated 2013-01-10 (latest revision 2012-07-09)
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html
Stream Stream state (No stream defined)
Document shepherd No shepherd assigned
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

Email authors IPR References Referenced by Nits Search lists

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-arkko-core-cellular-00.txt

Abstract

This memo discusses the use of the Constrained Application Protocol (CoAP) protocol in building sensors and other devices that employ cellular networks as a communications medium. Building communicating devices that employ these networks is obviously well known, but this memo focuses specifically on techniques necessary to minimize power consumption.

Authors

Jari Arkko (jari.arkko@piuha.net)
Anders Eriksson (anders.e.eriksson@ericsson.com)
Ari Keranen (ari.keranen@ericsson.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)