Extension to the Link Management Protocol (LMP/DWDM -rfc4209) for Dense Wavelength Division Multiplexing (DWDM) Optical Line Systems to manage the application code of optical interface parameters in DWDM application

The information below is for an old version of the document
Document Type Expired Internet-Draft (individual)
Authors Dharini Hiremagalur  , Gert Grammel  , Gabriele Galimberti  , Zafar Ali  , Ruediger Kunze  , Dieter Beller 
Last updated 2016-09-18 (latest revision 2016-03-17)
Replaced by draft-ietf-ccamp-dwdm-if-lmp
Stream (None)
Expired & archived
pdf htmlized (tools) htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at


This memo defines extensions to LMP(rfc4209) for managing Optical parameters associated with Wavelength Division Multiplexing (WDM) systems in accordance with the Interface Application Identifier approach defined in ITU-T Recommendation G.694.1.[ITU.G694.1] and its extensions.


Dharini Hiremagalur (dharinih@juniper.net)
Gert Grammel (ggrammel@juniper.net)
Gabriele Galimberti (ggalimbe@cisco.com)
Zafar Ali (zali@cisco.com)
Ruediger Kunze (RKunze@telekom.de)
Dieter Beller (dieter.beller@alcatel-lucent.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)