Advertisement of Remote Interface Identifiers for Layer 2 Bundle Members
draft-glctgp-lsr-l2-bundle-member-remote-id-02
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Liyan Gong , Changwang Lin , Mengxiao Chen , Ketan Talaulikar , Les Ginsberg , Peter Psenak | ||
| Last updated | 2025-02-17 | ||
| Replaces | draft-gong-lsr-lldp-interface-id | ||
| Replaced by | draft-ietf-lsr-l2-bundle-member-remote-id | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-lsr-l2-bundle-member-remote-id | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In networks where Layer 2 (L2) interface bundles (such as a Link Aggregation Group (LAG) [IEEE802.1AX]) are deployed, a controller may need to collect the connectivity relationships between bundle members for traffic engineering (TE) purposes. For example, when performing topology management and bidirectional path computation for TE, it is essential to know the connectivity relationships among bundle members. This document describes how OSPF and IS-IS would advertise the remote interface identifiers for Layer 2 bundle members. The corresponding extension of BGP-LS is also specified.
Authors
Liyan Gong
Changwang Lin
Mengxiao Chen
Ketan Talaulikar
Les Ginsberg
Peter Psenak
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)