eXtensible Stateless Equipment Data Exchange
draft-guy-xfsp-01
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Mark Spencer , Edward T Guy, III | ||
Last updated | 2024-02-03 (Latest revision 2023-08-02) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document presents a binary IP-based protocol to facilitate interoperable communications between avionics equipment. The protocol is UDP-based, stateless, and broadcast. Messages consist of a common header followed by a series of parameters and related attributes. The parameters are always informational, e.g., indicating airspeed is 150 kts, but parameter attributes can be set to indicate intent, e.g., this parameter contains a new user selected value such as an instruction that deploys the landing gear.
Authors
Mark Spencer
Edward T Guy, III
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)