Ethernet-Based xDSL Multi-Pair Bonding (G.Bond/Ethernet) MIB
Draft of message to be sent after approval:
From: The IESG <email@example.com> To: IETF-Announce <firstname.lastname@example.org> Cc: RFC Editor <email@example.com>, adslmib mailing list <firstname.lastname@example.org>, adslmib chair <email@example.com> Subject: Protocol Action: 'Ethernet-based xDSL multi-pair bonding (G.Bond/Ethernet) MIB' to Proposed Standard (draft-ietf-adslmib-gbond-eth-mib-08.txt) The IESG has approved the following document: - 'Ethernet-based xDSL multi-pair bonding (G.Bond/Ethernet) MIB' (draft-ietf-adslmib-gbond-eth-mib-08.txt) as Proposed Standard This document is the product of the ADSL MIB Working Group. The IESG contact persons are Benoit Claise and Ronald Bonica. A URL of this Internet Draft is: http://datatracker.ietf.org/doc/draft-ietf-adslmib-gbond-eth-mib/
Technical Summary This document defines Management Information Base (MIB) module for use with network management protocols in TCP/IP based internets. This document proposes an extension to the GBOND-MIB module with a set of objects for managing Ethernet-based multi-pair bonded xDSL interfaces, defined in ITU-T recommendation G.998.2. Working Group Summary The WG process was smooth with no real controversies. All work took place on the mailing list. Document Quality No information is available about implementations. Personnel Menachem Dodge is the Document Shepherd for this document Dan Romascanu was the first responsible Area Director. Benoit Claise is the current responsible Area Director.