Skip to main content

Label Switched Path Stitching with Generalized Multiprotocol Label Switching Traffic Engineering (GMPLS TE)
draft-ietf-ccamp-lsp-stitching-06

Yes

(David Ward)
(Ross Callon)

No Objection

(Chris Newman)
(Cullen Jennings)
(Dan Romascanu)
(Jari Arkko)
(Jon Peterson)
(Lars Eggert)
(Ron Bonica)
(Tim Polk)

No Record

(Lisa Dusseault)

Note: This ballot was opened for revision 06 and is now closed.

David Ward Former IESG member
Yes
Yes () Unknown

                            
Ross Callon Former IESG member
Yes
Yes () Unknown

                            
Chris Newman Former IESG member
No Objection
No Objection () Unknown

                            
Cullen Jennings Former IESG member
No Objection
No Objection () Unknown

                            
Dan Romascanu Former IESG member
No Objection
No Objection () Unknown

                            
Jari Arkko Former IESG member
No Objection
No Objection () Unknown

                            
Jon Peterson Former IESG member
No Objection
No Objection () Unknown

                            
Lars Eggert Former IESG member
No Objection
No Objection () Unknown

                            
Ron Bonica Former IESG member
No Objection
No Objection () Unknown

                            
Russ Housley Former IESG member
No Objection
No Objection (2007-08-16) Unknown
  From the Gen-ART Review by Francis Dupont

  Comments: there are only some editorial comments, i.e., things which
  should be handled by the RFC editor:
  - abstract page 2: from from -> from
  - TOC page 3: for LSP_ATTRIBUTES Object -> for the ...?
  - 2 page 5: are required -> are required to
  - 5.1 page 8: LSP ([RFC3473]), to -> LSP ([RFC3473]) to
  - 5.1.1 page 8: some other e2e LSP. -> some other e2e LSPs.?
  - 5.1.1 page 8: in the Resv, -> in the Resv message,
  - 5.1.1.1 page 9: in the Resv Label. -> in the Resv message.?
  - 5.1.2 page 10: bandwidth, local TE -> bandwidth or local TE
  - 5.1.2 page 11: a Path Msg -> a Path message
  - 5.1.2 page 11: a PathErr with the error codes ->
    a PathErr message with the error code?
  - 5.1.3 page 11: I can't parse this sentence (commas?):
    An e2e LSP traversing an S-LSP, SHOULD record in the RRO for that
    hop, an identifier corresponding to the S-LSP TE link.
  - 5.2.3 page 14: PCE -> Path Computation Element
  - 10 page 18: please add ", USA" after ZIP codes.
Tim Polk Former IESG member
No Objection
No Objection () Unknown

                            
Lisa Dusseault Former IESG member
(was Discuss) No Record
No Record () Unknown