Test Protocol for One-way IP Capacity Measurement
draft-ietf-ippm-capacity-protocol-04
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
|
|
|---|---|---|---|
| Authors | Len Ciavattone , Al Morton | ||
| Last updated | 2023-06-10 (Latest revision 2022-12-07) | ||
| Replaces | draft-morton-ippm-capacity-metric-protocol | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Formats | |||
| Reviews |
SECDIR Early review
by Brian Weis
Has issues
|
||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | WG Document | |
| Document shepherd | (None) | ||
| IESG | IESG state | Expired | |
| Consensus boilerplate | Yes | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This memo addresses the problem of protocol support for measuring Network Capacity metrics in RFC 9097, where the method deploys a feedback channel from the receiver to control the sender's transmission rate in near-real-time. This memo defines a simple protocol to perform the RFC 9097 (and other) measurements.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)