Mechanism to Support CHAP Mobile Node Authentication for RADIUS/DIAMETER Hybrid AAA Networks
draft-ietf-mobileip-radius-challenge-00

Document Type Expired Internet-Draft (mobileip WG)
Authors Ken Peirce  , Yingchun Xu  , Ed Campbell 
Last updated 1999-06-25
Stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized (tools) htmlized bibtex
Stream WG state WG Document
Document shepherd No shepherd assigned
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-mobileip-radius-challenge-00.txt

Abstract

Mobile IP Authentication is a requirement for the TR 45.6 CDMA wireless packet data service architecture[8]. Diameter AAA, as described in [1] and [2], is used to support Mobile IP authentication. This requires that both the foreign and home network deploy Diameter servers. Currently, RADIUS servers have been deployed and are widely used in the Internet Service Provider(ISP) arena.While DIAMETER is required to provide the advanced AAA support required by the TR 45.6 architecture, a smooth transition from RADIUS AAA to Diameter AAA is required. At a minimum,the Diameter AAA server located in a foreign network must inter-operate with RADIUS AAA located in Home Network.

Authors

Ken Peirce (kenneth_peirce@3com.com)
Yingchun Xu (Yingchun_Xu@mw.3com.com)
Ed Campbell (ed_campbell@mw.3com.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)