Connecting IPv6 Islands over IPv4 MPLS using IPv6 Provider Edge Routers (6PE)
draft-levy-idr-6pe-survey-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Eric Levy-Abegnoli | ||
| Last updated | 2006-01-30 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
[6PE] specifies a mechanism to interconnect IPv6 islands over an MPLS-enabled IPv4 cloud using the IPv6 Provider Edge routers (6PE) approach. The present document reports the results of an implementation survey for this mechanism. After a brief summary of the results, each survey response is listed. The document contains responses from the five implementers that completed the survey (Cisco Systems, Juniper Networks, Ixia, Agilent, Spirent). The document also reports some basic interoperability testing of 6PE implementations carried out by ISOCORE. No ambiguities or errors in the [6PE] specification which could compromise interoperability have been reported.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)