Considerations in Advertising Ring Properties for MPLS-based SDH/SONET Control
draft-mannie-mpls-sdh-ospf-isis-02
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Eric Mannie , Greg M. Bernstein | ||
| Last updated | 2001-11-28 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document provides the background and motivation behind advertising certain properties of SDH/SONET rings in the IP routing protocols [2],[3] used to control optical transport networks. The protocol extensions in [2],[3] enable the protection capabilities of TDM rings to be utilized when automatically setting up TDM circuits in the network. The current document provides the rationale for those extensions.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)