A Security Design for RPL: IPv6 Routing Protocol for Low Power and Lossy Networks
draft-sdt-roll-rpl-security-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Tzeta Tsao | ||
| Last updated | 2010-03-01 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document presents a security design for RPL: IPv6 Routing Protocol for Low Power and Lossy networks. The effort builds upon previous work on routing security and adapts the security assessments to the issues specific to RPL. With the threat model, the security objectives and required services are identified. These assessments then provide the basis of the security recommendations for incorporation into RPL.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)