Supporting IP Multicast over VPLS
draft-serbest-l2vpn-vpls-mcast-03
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Yetik Serbest | ||
| Last updated | 2005-07-19 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In Virtual Private LAN Service (VPLS), the PE devices provide a logical interconnect such that CE devices belonging to a specific VPLS instance appear to be connected by a single LAN. A VPLS solution performs replication for multicast traffic at the ingress PE devices. When replicated at the ingress PE, multicast traffic wastes bandwidth when 1. Multicast traffic is sent to sites with no members, and 2. Pseudo wires to different sites go through a shared path. This document is addressing the former by IGMP and PIM snooping.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)