AII Types for ATM and Frame Relay to MPLS Control Plane Interworking
draft-spiegel-pwe3-aii-types-atm-fr-control-iw-01
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Dr. Ethan M. Spiegel | ||
| Last updated | 2006-02-24 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes work in progress in the MFA Forum on ATM and Frame Relay to MPLS Control Plane Interworking. Two specifications are being defined, one for client-server interworking (between two client network endpoints that communicate across an IP/MPLS network) and one for SPVC interworking (from a client network endpoint to an IP/MPLS network endpoint). Both client-server interworking and SPVC Interworking use standard PWE3 control for establishment of the pseudowires that transport the ATM or Frame Relay data connections across the IP/MPLS network. New AII type codepoints from the "Expert Review" range are requested. The need for these codepoints and proposed usage is described.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)