GMPLS Control of Ethernet VLAN Cross Connect Switches
draft-sprecher-gels-ethernet-vlan-xc-01
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Author | Nurit Sprecher | ||
Last updated | 2006-03-22 | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document complements the 'GELS framework for GMPLS-controlled Ethernet Label Switching' paper ([GELS-FRAMEWORK]). It is based on the architecture and the control plane operations which are defined in the framework. Specifically, this document explains how Ethernet switches employing the VLAN Cross Connect method use the link local labels defined in the GELS framework document to establish Connection Oriented point-to-point Ethernet services. An additional document will be written to describe the natural extension to support multipoint services.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)