Improved Register Procedure in PIM-SM
draft-wen-pim-improved-register-00
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Haibo Wen , Yao Chunyan | ||
Last updated | 2007-06-12 | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In [PIM-SM], Register procedure needs to be triggered by multicast packets in the data-plane/forwarding-plane. The dependences of the control-plane on the data-plane/forwarding-plane to build control- plane state does not scale well. And also the encapsulation at the Designated Router and decapsulation at the Rendezvous Point are relatively expensive operations for routers. To solve the above- mentioned problems, this document proposes new mechanisms to make a clear separation of the control-plane and the data-plane/fowarding- plane for PIM register procedure.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)