**Javascript disabled?**Like other modern websites, the IETF Datatracker relies on Javascript. Please enable Javascript for full functionality.

#
CBOR Object Signing and Encryption (COSE) and JSON Object Signing and Encryption (JOSE) Registrations for Web Authentication (WebAuthn) Algorithms

RFC 8812

Document | Type | RFC - Proposed Standard (August 2020) | |
---|---|---|---|

Author | Michael B. Jones | ||

Last updated | 2020-08-14 | ||

RFC stream | Internet Engineering Task Force (IETF) | ||

Formats | |||

Additional resources | Mailing list discussion | ||

IESG | Responsible AD | Murray Kucherawy | |

Send notices to | (None) |

RFC 8812

Internet Engineering Task Force (IETF) M. Jones Request for Comments: 8812 Microsoft Category: Standards Track August 2020 ISSN: 2070-1721 CBOR Object Signing and Encryption (COSE) and JSON Object Signing and Encryption (JOSE) Registrations for Web Authentication (WebAuthn) Algorithms Abstract The W3C Web Authentication (WebAuthn) specification and the FIDO Alliance FIDO2 Client to Authenticator Protocol (CTAP) specification use CBOR Object Signing and Encryption (COSE) algorithm identifiers. This specification registers the following algorithms (which are used by WebAuthn and CTAP implementations) in the IANA "COSE Algorithms" registry: RSASSA-PKCS1-v1_5 using SHA-256, SHA-384, SHA-512, and SHA- 1; and Elliptic Curve Digital Signature Algorithm (ECDSA) using the secp256k1 curve and SHA-256. It registers the secp256k1 elliptic curve in the IANA "COSE Elliptic Curves" registry. Also, for use with JSON Object Signing and Encryption (JOSE), it registers the algorithm ECDSA using the secp256k1 curve and SHA-256 in the IANA "JSON Web Signature and Encryption Algorithms" registry and the secp256k1 elliptic curve in the IANA "JSON Web Key Elliptic Curve" registry. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8812. Copyright Notice Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction 1.1. Requirements Notation and Conventions 2. RSASSA-PKCS1-v1_5 Signature Algorithm 3. Using secp256k1 with JOSE and COSE 3.1. JOSE and COSE secp256k1 Curve Key Representations 3.2. ECDSA Signature with secp256k1 Curve 3.3. Other Uses of the secp256k1 Elliptic Curve 4. IANA Considerations 4.1. COSE Algorithms Registrations 4.2. COSE Elliptic Curves Registrations 4.3. JOSE Algorithms Registrations 4.4. JSON Web Key Elliptic Curves Registrations 5. Security Considerations 5.1. RSA Key Size Security Considerations 5.2. RSASSA-PKCS1-v1_5 with SHA-2 Security Considerations 5.3. RSASSA-PKCS1-v1_5 with SHA-1 Security Considerations 5.4. secp256k1 Security Considerations 6. References 6.1. Normative References 6.2. Informative References Acknowledgements Author's Address 1. Introduction This specification defines how to use several algorithms with CBOR Object Signing and Encryption (COSE) [RFC8152] that are used by implementations of the W3C Web Authentication (WebAuthn) [WebAuthn] and FIDO Alliance FIDO2 Client to Authenticator Protocol (CTAP) [CTAP] specifications. This specification registers these algorithms in the IANA "COSE Algorithms" registry [IANA.COSE.Algorithms] and registers an elliptic curve in the IANA "COSE Elliptic Curves" registry [IANA.COSE.Curves]. This specification also registers a corresponding algorithm for use with JSON Object Signing and Encryption (JOSE) [RFC7515] in the IANA "JSON Web Signature and Encryption Algorithms" registry [IANA.JOSE.Algorithms] and registers an elliptic curve in the IANA "JSON Web Key Elliptic Curve" registry [IANA.JOSE.Curves]. 1.1. Requirements Notation and Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. RSASSA-PKCS1-v1_5 Signature Algorithm The RSASSA-PKCS1-v1_5 signature algorithm is defined in [RFC8017]. The RSASSA-PKCS1-v1_5 signature algorithm is parameterized with a hash function (h). A key of size 2048 bits or larger MUST be used with these algorithms. Implementations need to check that the key type is 'RSA' when creating or verifying a signature. The RSASSA-PKCS1-v1_5 algorithms specified in this document are in the following table. +=======+========+=========+===================+=============+ | Name | Value | Hash | Description | Recommended | +=======+========+=========+===================+=============+ | RS256 | -257 | SHA-256 | RSASSA-PKCS1-v1_5 | No | | | | | using SHA-256 | | +-------+--------+---------+-------------------+-------------+ | RS384 | -258 | SHA-384 | RSASSA-PKCS1-v1_5 | No | | | | | using SHA-384 | | +-------+--------+---------+-------------------+-------------+ | RS512 | -259 | SHA-512 | RSASSA-PKCS1-v1_5 | No | | | | | using SHA-512 | | +-------+--------+---------+-------------------+-------------+ | RS1 | -65535 | SHA-1 | RSASSA-PKCS1-v1_5 | Deprecated | | | | | using SHA-1 | | +-------+--------+---------+-------------------+-------------+ Table 1: RSASSA-PKCS1-v1_5 Algorithm Values Security considerations for use of the first three algorithms are in Section 5.2. Security considerations for use of the last algorithm are in Section 5.3. Note that these algorithms are already present in the IANA "JSON Web Signature and Encryption Algorithms" registry [IANA.JOSE.Algorithms], and so these registrations are only for the IANA "COSE Algorithms" registry [IANA.COSE.Algorithms]. 3. Using secp256k1 with JOSE and COSE This section defines algorithm encodings and representations enabling the Standards for Efficient Cryptography Group (SECG) elliptic curve secp256k1 [SEC2] to be used for JOSE [RFC7515] and COSE [RFC8152] messages. 3.1. JOSE and COSE secp256k1 Curve Key Representations The SECG elliptic curve secp256k1 [SEC2] is represented in a JSON Web Key (JWK) [RFC7517] using these values: * "kty": "EC" * "crv": "secp256k1" plus the values needed to represent the curve point, as defined in Section 6.2.1 of [RFC7518]. As a compressed point encoding representation is not defined for JWK elliptic curve points, the uncompressed point encoding defined there MUST be used. The "x" and "y" values represented MUST both be exactly 256 bits, with any leading zeros preserved. Other optional values such as "alg" MAY also be present. It is represented in a COSE_Key [RFC8152] using these values: * "kty" (1): "EC2" (2) * "crv" (-1): "secp256k1" (8) plus the values needed to represent the curve point, as defined in Section 13.1.1 of [RFC8152]. Either the uncompressed or compressed point encoding representations defined there can be used. The "x" value represented MUST be exactly 256 bits, with any leading zeros preserved. If the uncompressed representation is used, the "y" value represented MUST likewise be exactly 256 bits, with any leading zeros preserved; if the compressed representation is used, the "y" value is a boolean value, as specified in Section 13.1.1 of [RFC8152]. Other optional values such as "alg" (3) MAY also be present. 3.2. ECDSA Signature with secp256k1 Curve The ECDSA signature algorithm is defined in [DSS]. This specification defines the "ES256K" algorithm identifier, which is used to specify the use of ECDSA with the secp256k1 curve and the SHA-256 [DSS] cryptographic hash function. Implementations need to check that the key type is "EC" for JOSE or "EC2" (2) for COSE and that the curve of the key is secp256k1 when creating or verifying a signature. The ECDSA secp256k1 SHA-256 digital signature is generated as follows: 1. Generate a digital signature of the JWS Signing Input or the COSE Sig_structure using ECDSA secp256k1 SHA-256 with the desired private key. The output will be the pair (R, S), where R and S are 256-bit unsigned integers. 2. Turn R and S into octet sequences in big-endian order, with each array being 32 octets long. The octet sequence representations MUST NOT be shortened to omit any leading zero octets contained in the values. 3. Concatenate the two octet sequences in the order R and then S. (Note that many ECDSA implementations will directly produce this concatenation as their output.) 4. The resulting 64-octet sequence is the JWS Signature or COSE signature value. Implementations SHOULD use a deterministic algorithm to generate the ECDSA nonce, k, such as the algorithm defined in [RFC6979]. However, in situations where devices are vulnerable to physical attacks, deterministic ECDSA has been shown to be susceptible to fault injection attacks [KUDELSKI17] [EURO-SP18]. Where this is a possibility, implementations SHOULD implement appropriate countermeasures. Where there are specific certification requirements (such as FIPS approval), implementors should check whether deterministic ECDSA is an approved nonce generation method. The ECDSA secp256k1 SHA-256 algorithm specified in this document uses these identifiers: +========+=======+=======================+=============+ | Name | Value | Description | Recommended | +========+=======+=======================+=============+ | ES256K | -47 | ECDSA using secp256k1 | No | | | | curve and SHA-256 | | +--------+-------+-----------------------+-------------+ Table 2: ECDSA Algorithm Values When using a JWK or COSE_Key for this algorithm, the following checks are made: * The "kty" field MUST be present, and it MUST be "EC" for JOSE or "EC2" for COSE. * The "crv" field MUST be present, and it MUST represent the "secp256k1" elliptic curve. * If the "alg" field is present, it MUST represent the "ES256K" algorithm. * If the "key_ops" field is present, it MUST include "sign" when creating an ECDSA signature. * If the "key_ops" field is present, it MUST include "verify" when verifying an ECDSA signature. * If the JWK "use" field is present, its value MUST be "sig". 3.3. Other Uses of the secp256k1 Elliptic Curve This specification defines how to use the secp256k1 curve for ECDSA signatures for both JOSE and COSE implementations. While in theory the curve could also be used for ECDH-ES key agreement, it is beyond the scope of this specification to state whether this is or is not advisable. Thus, whether or not to recommend its use with ECDH-ES is left for experts to decide in future specifications. When used for ECDSA, the secp256k1 curve MUST be used only with the "ES256K" algorithm identifier and not any others, including not with the COSE "ES256" identifier. Note that the "ES256K" algorithm identifier needed to be introduced for JOSE to sign with the secp256k1 curve because the JOSE "ES256" algorithm is defined to be used only with the P-256 curve. The COSE treatment of how to sign with secp256k1 is intentionally parallel to that for JOSE, where the secp256k1 curve MUST be used with the "ES256K" algorithm identifier. 4. IANA Considerations 4.1. COSE Algorithms Registrations IANA has registered the following values in the "COSE Algorithms" registry [IANA.COSE.Algorithms]. Name: RS256 Value: -257 Description: RSASSA-PKCS1-v1_5 using SHA-256 Change Controller: IESG Reference: Section 2 of RFC 8812 Recommended: No Name: RS384 Value: -258 Description: RSASSA-PKCS1-v1_5 using SHA-384 Change Controller: IESG Reference: Section 2 of RFC 8812 Recommended: No Name: RS512 Value: -259 Description: RSASSA-PKCS1-v1_5 using SHA-512 Change Controller: IESG Reference: Section 2 of RFC 8812 Recommended: No Name: RS1 Value: -65535 Description: RSASSA-PKCS1-v1_5 using SHA-1 Change Controller: IESG Reference: Section 2 of RFC 8812 Recommended: Deprecated Name: ES256K Value: -47 Description: ECDSA using secp256k1 curve and SHA-256 Change Controller: IESG Reference: Section 3.2 of RFC 8812 Recommended: No 4.2. COSE Elliptic Curves Registrations IANA has registered the following value in the "COSE Elliptic Curves" registry [IANA.COSE.Curves]. Name: secp256k1 Value: 8 Key Type: EC2 Description: SECG secp256k1 curve Change Controller: IESG Reference: Section 3.1 of RFC 8812 Recommended: No 4.3. JOSE Algorithms Registrations IANA has registered the following value in the "JSON Web Signature and Encryption Algorithms" registry [IANA.JOSE.Algorithms]. Algorithm Name: ES256K Algorithm Description: ECDSA using secp256k1 curve and SHA-256 Algorithm Usage Location(s): alg JOSE Implementation Requirements: Optional Change Controller: IESG Reference: Section 3.2 of RFC 8812 Algorithm Analysis Document(s): [SEC2] 4.4. JSON Web Key Elliptic Curves Registrations IANA has registered the following value in the "JSON Web Key Elliptic Curve" registry [IANA.JOSE.Curves]. Curve Name: secp256k1 Curve Description: SECG secp256k1 curve JOSE Implementation Requirements: Optional Change Controller: IESG Specification Document(s): Section 3.1 of RFC 8812 5. Security Considerations 5.1. RSA Key Size Security Considerations The security considerations on key sizes for RSA algorithms from Section 6.1 of [RFC8230] also apply to the RSA algorithms in this specification. 5.2. RSASSA-PKCS1-v1_5 with SHA-2 Security Considerations The security considerations on the use of RSASSA-PKCS1-v1_5 with SHA-2 hash functions (SHA-256, SHA-384, and SHA-512) from Section 8.3 of [RFC7518] also apply to their use in this specification. For that reason, these algorithms are registered as being "Not Recommended". Likewise, the exponent restrictions described in Section 8.3 of [RFC7518] also apply. 5.3. RSASSA-PKCS1-v1_5 with SHA-1 Security Considerations The security considerations on the use of the SHA-1 hash function from [RFC6194] apply in this specification. For that reason, the "RS1" algorithm is registered as "Deprecated". Likewise, the exponent restrictions described in Section 8.3 of [RFC7518] also apply. A COSE algorithm identifier for this algorithm is nonetheless being registered because deployed Trusted Platform Modules (TPMs) continue to use it; therefore, WebAuthn implementations need a COSE algorithm identifier for "RS1" when TPM attestations using this algorithm are being represented. New COSE applications and protocols MUST NOT use this algorithm. 5.4. secp256k1 Security Considerations Care should be taken that a secp256k1 key is not mistaken for a P-256 [RFC7518] key, given that their representations are the same except for the "crv" value. As described in Section 8.1.1 of [RFC8152], we currently do not have any way to deal with this attack except to restrict the set of curves that can be used. The procedures and security considerations described in the [SEC1], [SEC2], and [DSS] specifications apply to implementations of this specification. Timing side-channel attacks are possible if the implementation of scalar multiplication over the curve does not execute in constant time. There are theoretical weaknesses with this curve that could result in future attacks. While these potential weaknesses are not unique to this curve, they are the reason that this curve is registered as "Recommended: No". 6. References 6.1. Normative References [DSS] National Institute of Standards and Technology (NIST), "Digital Signature Standard (DSS)", FIPS PUB 186-4, DOI 10.6028/NIST.FIPS.186-4, July 2013, <https://doi.org/10.6028/NIST.FIPS.186-4>. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>. [RFC6194] Polk, T., Chen, L., Turner, S., and P. Hoffman, "Security Considerations for the SHA-0 and SHA-1 Message-Digest Algorithms", RFC 6194, DOI 10.17487/RFC6194, March 2011, <https://www.rfc-editor.org/info/rfc6194>. [RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May 2015, <https://www.rfc-editor.org/info/rfc7515>. [RFC7517] Jones, M., "JSON Web Key (JWK)", RFC 7517, DOI 10.17487/RFC7517, May 2015, <https://www.rfc-editor.org/info/rfc7517>. [RFC7518] Jones, M., "JSON Web Algorithms (JWA)", RFC 7518, DOI 10.17487/RFC7518, May 2015, <https://www.rfc-editor.org/info/rfc7518>. [RFC8017] Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch, "PKCS #1: RSA Cryptography Specifications Version 2.2", RFC 8017, DOI 10.17487/RFC8017, November 2016, <https://www.rfc-editor.org/info/rfc8017>. [RFC8152] Schaad, J., "CBOR Object Signing and Encryption (COSE)", RFC 8152, DOI 10.17487/RFC8152, July 2017, <https://www.rfc-editor.org/info/rfc8152>. [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>. [RFC8230] Jones, M., "Using RSA Algorithms with CBOR Object Signing and Encryption (COSE) Messages", RFC 8230, DOI 10.17487/RFC8230, September 2017, <https://www.rfc-editor.org/info/rfc8230>. [SEC1] Standards for Efficient Cryptography Group, "SEC 1: Elliptic Curve Cryptography", Version 2.0, May 2009, <https://www.secg.org/sec1-v2.pdf>. [SEC2] Standards for Efficient Cryptography Group, "SEC 2: Recommended Elliptic Curve Domain Parameters", Version 2.0, January 2010, <https://www.secg.org/sec2-v2.pdf>. 6.2. Informative References [CTAP] Brand, C., Czeskis, A., Ehrensvärd, J., Jones, M., Kumar, A., Lindemann, R., Powers, A., and J. Verrept, "Client to Authenticator Protocol (CTAP)", FIDO Alliance Proposed Standard, January 2019, <https://fidoalliance.org/specs/ fido-v2.0-ps-20190130/fido-client-to-authenticator- protocol-v2.0-ps-20190130.html>. [EURO-SP18] Poddebniak, D., Somorovsky, J., Schinzel, S., Lochter, M., and P. Rösler, "Attacking Deterministic Signature Schemes using Fault Attacks", 2018 IEEE European Symposium on Security and Privacy (EuroS&P), DOI 10.1109/EuroSP.2018.00031, April 2018, <https://ieeexplore.ieee.org/document/8406609>. [IANA.COSE.Algorithms] IANA, "COSE Algorithms", <https://www.iana.org/assignments/cose>. [IANA.COSE.Curves] IANA, "COSE Elliptic Curves", <https://www.iana.org/assignments/cose>. [IANA.JOSE.Algorithms] IANA, "JSON Web Signature and Encryption Algorithms", <https://www.iana.org/assignments/jose>. [IANA.JOSE.Curves] IANA, "JSON Web Key Elliptic Curve", <https://www.iana.org/assignments/jose>. [KUDELSKI17] Romailler, Y., "How to Defeat Ed25519 and EdDSA Using Faults", Kudelski Security Research, October 2017, <https://research.kudelskisecurity.com/2017/10/04/ defeating-eddsa-with-faults/>. [RFC6979] Pornin, T., "Deterministic Usage of the Digital Signature Algorithm (DSA) and Elliptic Curve Digital Signature Algorithm (ECDSA)", RFC 6979, DOI 10.17487/RFC6979, August 2013, <https://www.rfc-editor.org/info/rfc6979>. [WebAuthn] Balfanz, D., Czeskis, A., Hodges, J., Jones, J.C., Jones, M., Kumar, A., Liao, A., Lindemann, R., and E. Lundberg, "Web Authentication: An API for accessing Public Key Credentials - Level 1", W3C Recommendation, March 2019, <https://www.w3.org/TR/2019/REC-webauthn-1-20190304/>. Acknowledgements Thanks to Roman Danyliw, Linda Dunbar, Stephen Farrell, John Fontana, Jeff Hodges, Kevin Jacobs, J.C. Jones, Benjamin Kaduk, Murray Kucherawy, Neil Madden, John Mattsson, Matthew Miller, Tony Nadalin, Matt Palmer, Eric Rescorla, Rich Salz, Jim Schaad, Goeran Selander, Wendy Seltzer, Sean Turner, and Samuel Weiler for their roles in registering these algorithm identifiers. Author's Address Michael B. Jones Microsoft Email: mbj@microsoft.com URI: https://self-issued.info/