Skip to main content

Updates to the Concise Data Definition Language (CDDL) Grammar
RFC 9682

Document Type RFC - Proposed Standard (November 2024)
Updates RFC 8610
Author Carsten Bormann
Last updated 2024-11-18
RFC stream Internet Engineering Task Force (IETF)
Formats
Additional resources Mailing list discussion
IESG Responsible AD Orie Steele
Send notices to (None)
RFC 9682


Internet Engineering Task Force (IETF)                        C. Bormann
Request for Comments: 9682                        Universität Bremen TZI
Updates: 8610                                              November 2024
Category: Standards Track                                               
ISSN: 2070-1721

     Updates to the Concise Data Definition Language (CDDL) Grammar

Abstract

   The Concise Data Definition Language (CDDL), as defined in RFCs 8610
   and 9165, provides an easy and unambiguous way to express structures
   for protocol messages and data formats that are represented in
   Concise Binary Object Representation (CBOR) or JSON.

   This document updates RFC 8610 by addressing related errata reports
   and making other small fixes for the ABNF grammar defined for CDDL.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc9682.

Copyright Notice

   Copyright (c) 2024 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents

   1.  Introduction
     1.1.  Conventions and Definitions
   2.  Clarifications and Changes Based on Errata Reports
     2.1.  Updates to String Literal Grammar
       2.1.1.  Erratum ID 6527 (Text String Literals)
       2.1.2.  Erratum ID 6278 (Consistent String Literals)
       2.1.3.  Addressing Erratum ID 6526 and Erratum ID 6543
     2.2.  Examples Demonstrating the Updated String Syntaxes
   3.  Small Enabling Grammar Changes
     3.1.  Empty Data Models
     3.2.  Non-Literal Tag Numbers and Simple Values
   4.  Security Considerations
   5.  IANA Considerations
   6.  References
     6.1.  Normative References
     6.2.  Informative References
   Appendix A.  Updated Collected ABNF for CDDL
   Appendix B.  Details about Covering Erratum ID 6543
     B.1.  Change Proposed by Erratum ID 6543
     B.2.  No Further Change Needed after Updating String Literal
           Grammar
   Acknowledgments
   Author's Address

1.  Introduction

   The Concise Data Definition Language (CDDL), as defined in [RFC8610]
   and [RFC9165], provides an easy and unambiguous way to express
   structures for protocol messages and data formats that are
   represented in CBOR or JSON.

   This document updates [RFC8610] by addressing errata reports and
   making other small fixes for the ABNF grammar defined for CDDL.  The
   body of this document explains and shows motivation for the updates;
   the updated collected ABNF syntax in Figure 11 in Appendix A replaces
   the collected ABNF syntax in Appendix B of [RFC8610].

1.1.  Conventions and Definitions

   The terminology from [RFC8610] applies.  The grammar in [RFC8610] is
   based on ABNF, which is defined in [STD68] and [RFC7405].

2.  Clarifications and Changes Based on Errata Reports

   A number of errata reports have been made regarding some details of
   text string and byte string literal syntax: for example, [Err6527]
   and [Err6543].  These are being addressed in this section, updating
   details of the ABNF for these literal syntaxes.  Also, the changes
   described in [Err6526] need to be applied (backslashes have been lost
   during the RFC publication process of Appendix G.2 of [RFC8610],
   garbling the text explaining backslash escaping).

   These changes are intended to mirror the way existing implementations
   have dealt with the errata reports.  This document also uses the
   opportunity presented by the necessary cleanup of the grammar of
   string literals for a backward-compatible addition to the syntax for
   hexadecimal escapes.  The latter change is not automatically forward
   compatible (i.e., CDDL specifications that make use of this syntax do
   not necessarily work with existing implementations until these are
   updated, which is recommended by this specification).

2.1.  Updates to String Literal Grammar

2.1.1.  Erratum ID 6527 (Text String Literals)

   The ABNF used in [RFC8610] for the content of text string literals is
   rather permissive:

   ; ABNF from RFC 8610:
   text = %x22 *SCHAR %x22
   SCHAR = %x20-21 / %x23-5B / %x5D-7E / %x80-10FFFD / SESC
   SESC = "\" (%x20-7E / %x80-10FFFD)

     Figure 1: Original ABNF from RFC 8610 for Strings with Permissive
              ABNF for SESC (Which Did Not Allow Hex Escapes)

   This allows almost any non-C0 character to be escaped by a backslash,
   but critically misses out on the \uXXXX and \uHHHH\uLLLL forms that
   JSON allows to specify characters in hex (which should apply here
   according to item 6 of Section 3.1 of [RFC8610]).  (Note that CDDL
   imports from JSON the unwieldy \uHHHH\uLLLL syntax, which represents
   Unicode code points beyond U+FFFF by making them look like UTF-16
   surrogate pairs; CDDL text strings do not use UTF-16 or surrogates.)

   Both can be solved by updating the SESC rule.  This document uses the
   opportunity to add a popular form of directly specifying characters
   in strings using hexadecimal escape sequences of the form \u{hex},
   where hex is the hexadecimal representation of the Unicode scalar
   value.  The result is the new set of rules defining SESC in Figure 2.

   ; new rules collectively defining SESC:
   SESC = "\" ( %x22 / "/" / "\" /                 ; \" \/ \\
                %x62 / %x66 / %x6E / %x72 / %x74 / ; \b \f \n \r \t
                (%x75 hexchar) )                   ; \uXXXX
   hexchar = "{" (1*"0" [ hexscalar ] / hexscalar) "}" /
             non-surrogate / (high-surrogate "\" %x75 low-surrogate)
   non-surrogate = ((DIGIT / "A"/"B"/"C" / "E"/"F") 3HEXDIG) /
                   ("D" %x30-37 2HEXDIG )
   high-surrogate = "D" ("8"/"9"/"A"/"B") 2HEXDIG
   low-surrogate = "D" ("C"/"D"/"E"/"F") 2HEXDIG
   hexscalar = "10" 4HEXDIG / HEXDIG1 4HEXDIG
             / non-surrogate / 1*3HEXDIG
   HEXDIG1 = DIGIT1 / "A" / "B" / "C" / "D" / "E" / "F"

     Figure 2: Update to String ABNF in Appendix B of [RFC8610]: Allow
                                Hex Escapes

      |  Notes: In ABNF, strings such as "A", "B", etc., are case
      |  insensitive, as is intended here.  The rules above could have
      |  also used %s"b", etc., instead of %x62, but didn't, in order to
      |  maximize compatibility with ABNF tools.

   Now that SESC is more restrictively formulated, an update to the
   BCHAR rule used in the ABNF syntax for byte string literals is also
   required:

   ; ABNF from RFC 8610:
   bytes = [bsqual] %x27 *BCHAR %x27
   BCHAR = %x20-26 / %x28-5B / %x5D-10FFFD / SESC / CRLF
   bsqual = "h" / "b64"

                   Figure 3: ABNF from RFC 8610 for BCHAR

   With the SESC updated as above, \' is no longer allowed in BCHAR and
   now needs to be explicitly included there; see Figure 4.

2.1.2.  Erratum ID 6278 (Consistent String Literals)

   Updating BCHAR also provides an opportunity to address [Err6278],
   which points to an inconsistency in treating U+007F (DEL) between
   SCHAR and BCHAR.  As U+007F is not printable, including it in a byte
   string literal is as confusing as for a text string literal;
   therefore, it should be excluded from BCHAR as it is from SCHAR.  The
   same reasoning also applies to the C1 control characters, so the
   updated ABNF actually excludes the entire range from U+007F to
   U+009F.  The same reasoning also applies to text in comments (PCHAR).
   For completeness, all these rules should also explicitly exclude the
   code points that have been set aside for UTF-16 surrogates.

   ; new rules for SCHAR, BCHAR, and PCHAR:
   SCHAR = %x20-21 / %x23-5B / %x5D-7E / NONASCII / SESC
   BCHAR = %x20-26 / %x28-5B / %x5D-7E / NONASCII / SESC / "\'" / CRLF
   PCHAR = %x20-7E / NONASCII
   NONASCII = %xA0-D7FF / %xE000-10FFFD

        Figure 4: Update to ABNF in Appendix B of [RFC8610]: BCHAR,
                              SCHAR, and PCHAR

   (Note that, apart from addressing the inconsistencies, there is no
   attempt to further exclude non-printable characters from the ABNF;
   doing this properly would draw in complexity from the ongoing
   evolution of the Unicode standard [UNICODE] that is not needed here.)

2.1.3.  Addressing Erratum ID 6526 and Erratum ID 6543

   The above changes also cover [Err6543] (a proposal to split off
   qualified byte string literals from UTF-8 byte string literals) and
   [Err6526] (lost backslashes); see Appendix B for details.

2.2.  Examples Demonstrating the Updated String Syntaxes

   The CDDL example in Figure 5 demonstrates various escaping techniques
   now available for (byte and text) strings in CDDL.  Obviously, in the
   literals for a and x, there is no need to escape the second
   character, an o, as \u{6f}; this is just for demonstration.
   Similarly, as shown in c and z, there also is no need to escape the
   "🁳" (DOMINO TILE VERTICAL-02-02, U+1F073) or "⌘" (PLACE OF INTEREST
   SIGN, U+2318); however, escaping them may be convenient in order to
   limit the character repertoire of a CDDL file itself to ASCII
   [STD80].

   start = [a, b, c, x, y, z]

   ; "🁳", DOMINO TILE VERTICAL-02-02, and
   ; "⌘", PLACE OF INTEREST SIGN, in a text string:
   a = "D\u{6f}mino's \u{1F073} + \u{2318}"      ; \u{}-escape 3 chars
   b = "Domino's \uD83C\uDC73 + \u2318"          ; escape JSON-like
   c = "Domino's 🁳 + ⌘"                          ; unescaped

   ; in a byte string given as text, the ' needs to be escaped:
   x = 'D\u{6f}mino\u{27}s \u{1F073} + \u{2318}' ; \u{}-escape 4 chars
   y = 'Domino\'s \uD83C\uDC73 + \u2318'         ; escape JSON-like
   z = 'Domino\'s 🁳 + ⌘'                         ; escape ' only

   Figure 5: Example Text and Byte String Literals with Various Escaping
                                 Techniques

   In this example, the rules a to c and x to z all produce strings with
   byte-wise identical content: a to c are text strings and x to z are
   byte strings.  Figure 6 illustrates this by showing the output
   generated from the start rule in Figure 5, using pretty-printed
   hexadecimal.

   86                                      # array(6)
      73                                   # text(19)
         446f6d696e6f277320f09f81b3202b20e28c98 # "Domino's 🁳 + ⌘"
      73                                   # text(19)
         446f6d696e6f277320f09f81b3202b20e28c98 # "Domino's 🁳 + ⌘"
      73                                   # text(19)
         446f6d696e6f277320f09f81b3202b20e28c98 # "Domino's 🁳 + ⌘"
      53                                   # bytes(19)
         446f6d696e6f277320f09f81b3202b20e28c98 # "Domino's 🁳 + ⌘"
      53                                   # bytes(19)
         446f6d696e6f277320f09f81b3202b20e28c98 # "Domino's 🁳 + ⌘"
      53                                   # bytes(19)
         446f6d696e6f277320f09f81b3202b20e28c98 # "Domino's 🁳 + ⌘"

         Figure 6: Generated CBOR from CDDL Example (Pretty-Printed
                                Hexadecimal)

3.  Small Enabling Grammar Changes

   Each subsection that follows specifies a small change to the grammar
   that is intended to enable certain kinds of specifications.  These
   changes are backward compatible (i.e., CDDL files that comply with
   [RFC8610] continue to match the updated grammar) but not necessarily
   forward compatible (i.e., CDDL specifications that make use of these
   changes cannot necessarily be processed by existing implementations
   of [RFC8610]).

3.1.  Empty Data Models

   [RFC8610] requires a CDDL file to have at least one rule.

   ; ABNF from RFC 8610:
   cddl = S 1*(rule S)

            Figure 7: ABNF from RFC 8610 for Top-Level Rule cddl

   This makes sense when the file has to stand alone, as a CDDL data
   model needs to have at least one rule to provide an entry point
   (i.e., a start rule).

   With CDDL modules [CDDL-MODULES], CDDL files can also include
   directives, and these might be the source of all the rules that
   ultimately make up the module created by the file.  Any other rule
   content in the file has to be available for directive processing,
   making the requirement for at least one rule cumbersome.

   Therefore, the present update extends the grammar as in Figure 8 and
   turns the existence of at least one rule into a semantic constraint,
   to be fulfilled after processing of all directives.

   ; new top-level rule:
   cddl = S *(rule S)

    Figure 8: Update to Top-Level ABNF in Appendices B and C of RFC 8610

3.2.  Non-Literal Tag Numbers and Simple Values

   The existing ABNF syntax for expressing tags in CDDL is as follows:

   ; extracted from the ABNF in RFC 8610:
   type2 =/ "#" "6" ["." uint] "(" S type S ")"

            Figure 9: Original ABNF from RFC 8610 for Tag Syntax

   This means tag numbers can only be given as literal numbers (uints).
   Some specifications operate on ranges of tag numbers; for example,
   [RFC9277] has a range of tag numbers 1668546817 (0x63740101) to
   1668612095 (0x6374FFFF) to tag specific content formats.  This cannot
   currently be expressed in CDDL.  Similar considerations apply to
   simple values (#7.xx).

   This update extends the syntax to the following:

   ; new rules collectively defining the tagged case:
   type2 =/ "#" "6" ["." head-number] "(" S type S ")"
          / "#" "7" ["." head-number]
   head-number = uint / ("<" type ">")

       Figure 10: Update to Tag and Simple Value ABNF in Appendices B
                             and C of RFC 8610

   For #6, the head-number stands for the tag number.  For #7, the head-
   number stands for the simple value if it is in the ranges 0..23 or
   32..255 (as per Section 3.3 of RFC 8949 [STD94], the simple values
   24..31 are not used).  For 24..31, the head-number stands for the
   "additional information", e.g., #7.25 or #7.<25> is a float16, etc.
   (All ranges mentioned here are inclusive.)

   So the above range can be expressed in a CDDL fragment such as:

   ct-tag<content> = #6.<ct-tag-number>(content)
   ct-tag-number = 1668546817..1668612095
   ; or use 0x63740101..0x6374FFFF

      |  Notes:
      |  
      |     1.  This syntax reuses the angle bracket syntax for
      |         generics; this reuse is innocuous because a generic
      |         parameter or argument only ever occurs after a rule name
      |         (id), while it occurs after the "." (dot) character
      |         here.  (Whether there is potential for human confusion
      |         can be debated; the above example deliberately uses
      |         generics as well.)
      |  
      |     2.  The updated ABNF grammar makes it a bit more explicit
      |         that the number given after the optional dot is the
      |         value of the argument: for tags and simple values, it is
      |         not giving the CBOR "additional information”, as it is
      |         with other uses of # in CDDL.  (Adding this observation
      |         to Section 2.2.3 of [RFC8610] is the subject of
      |         [Err6575]; it is correctly noted in Section 3.6 of
      |         [RFC8610].)  In hindsight, maybe a different character
      |         than the dot should have been chosen for this special
      |         case; however, changing the grammar in the current
      |         document would have been too disruptive.

4.  Security Considerations

   The grammar fixes and updates in this document are not believed to
   create additional security considerations.  The security
   considerations in Section 5 of [RFC8610] apply.  Specifically, the
   potential for confusion is increased in an environment that uses a
   combination of CDDL tools, some of which have been updated and some
   of which have not, in particular based on Section 2.

   Attackers may want to exploit such potential confusion by crafting
   CDDL models that are interpreted differently by different parts of a
   system.  There will be a period of transition from the details that
   the grammar in [RFC8610] handled in a less well-defined way, to the
   updated grammar defined in the present document.  This transition
   might offer one (but not the only) type of opportunity for the kind
   of attack that relies on differences between implementations.
   Implementations that make use of CDDL models operationally already
   need to ascertain the provenance (and thus authenticity and
   integrity) and applicability of models they employ.  At the time of
   writing, it is expected that the models will generally be processed
   by a software developer, within a software development environment.
   Therefore, developers are advised to treat CDDL models with the same
   care as any other source code.

5.  IANA Considerations

   This document has no IANA actions.

6.  References

6.1.  Normative References

   [RFC8610]  Birkholz, H., Vigano, C., and C. Bormann, "Concise Data
              Definition Language (CDDL): A Notational Convention to
              Express Concise Binary Object Representation (CBOR) and
              JSON Data Structures", RFC 8610, DOI 10.17487/RFC8610,
              June 2019, <https://www.rfc-editor.org/info/rfc8610>.

   [STD68]    Internet Standard 68,
              <https://www.rfc-editor.org/info/std68>.
              At the time of writing, this STD comprises the following:

              Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234,
              DOI 10.17487/RFC5234, January 2008,
              <https://www.rfc-editor.org/info/rfc5234>.

   [STD94]    Internet Standard 94,
              <https://www.rfc-editor.org/info/std94>.
              At the time of writing, this STD comprises the following:

              Bormann, C. and P. Hoffman, "Concise Binary Object
              Representation (CBOR)", STD 94, RFC 8949,
              DOI 10.17487/RFC8949, December 2020,
              <https://www.rfc-editor.org/info/rfc8949>.

6.2.  Informative References

   [CDDL-MODULES]
              Bormann, C. and B. Moran, "CDDL Module Structure", Work in
              Progress, Internet-Draft, draft-ietf-cbor-cddl-modules-03,
              1 September 2024, <https://datatracker.ietf.org/doc/html/
              draft-ietf-cbor-cddl-modules-03>.

   [EDN-LITERALS]
              Bormann, C., "CBOR Extended Diagnostic Notation (EDN)",
              Work in Progress, Internet-Draft, draft-ietf-cbor-edn-
              literals-13, 3 November 2024,
              <https://datatracker.ietf.org/doc/html/draft-ietf-cbor-
              edn-literals-13>.

   [Err6278]  RFC Errata, Erratum ID 6278, RFC 8610,
              <https://www.rfc-editor.org/errata/eid6278>.

   [Err6526]  RFC Errata, Erratum ID 6526, RFC 8610,
              <https://www.rfc-editor.org/errata/eid6526>.

   [Err6527]  RFC Errata, Erratum ID 6527, RFC 8610,
              <https://www.rfc-editor.org/errata/eid6527>.

   [Err6543]  RFC Errata, Erratum ID 6543, RFC 8610,
              <https://www.rfc-editor.org/errata/eid6543>.

   [Err6575]  RFC Errata, Erratum ID 6575, RFC 8610,
              <https://www.rfc-editor.org/errata/eid6575>.

   [RFC7405]  Kyzivat, P., "Case-Sensitive String Support in ABNF",
              RFC 7405, DOI 10.17487/RFC7405, December 2014,
              <https://www.rfc-editor.org/info/rfc7405>.

   [RFC9165]  Bormann, C., "Additional Control Operators for the Concise
              Data Definition Language (CDDL)", RFC 9165,
              DOI 10.17487/RFC9165, December 2021,
              <https://www.rfc-editor.org/info/rfc9165>.

   [RFC9277]  Richardson, M. and C. Bormann, "On Stable Storage for
              Items in Concise Binary Object Representation (CBOR)",
              RFC 9277, DOI 10.17487/RFC9277, August 2022,
              <https://www.rfc-editor.org/info/rfc9277>.

   [STD80]    Internet Standard 80,
              <https://www.rfc-editor.org/info/std80>.
              At the time of writing, this STD comprises the following:

              Cerf, V., "ASCII format for network interchange", STD 80,
              RFC 20, DOI 10.17487/RFC0020, October 1969,
              <https://www.rfc-editor.org/info/rfc20>.

   [UNICODE]  The Unicode Consortium, "The Unicode Standard",
              <https://www.unicode.org/versions/latest/>.

Appendix A.  Updated Collected ABNF for CDDL

   This appendix is normative.

   It provides the full ABNF from [RFC8610] as updated by the present
   document.

   cddl = S *(rule S)
   rule = typename [genericparm] S assignt S type
        / groupname [genericparm] S assigng S grpent

   typename = id
   groupname = id

   assignt = "=" / "/="
   assigng = "=" / "//="

   genericparm = "<" S id S *("," S id S ) ">"
   genericarg = "<" S type1 S *("," S type1 S ) ">"

   type = type1 *(S "/" S type1)

   type1 = type2 [S (rangeop / ctlop) S type2]
   ; space may be needed before the operator if type2 ends in a name

   type2 = value
         / typename [genericarg]
         / "(" S type S ")"
         / "{" S group S "}"
         / "[" S group S "]"
         / "~" S typename [genericarg]
         / "&" S "(" S group S ")"
         / "&" S groupname [genericarg]
         / "#" "6" ["." head-number] "(" S type S ")"
         / "#" "7" ["." head-number]
         / "#" DIGIT ["." uint]                ; major/ai
         / "#"                                 ; any
   head-number = uint / ("<" type ">")

   rangeop = "..." / ".."

   ctlop = "." id

   group = grpchoice *(S "//" S grpchoice)

   grpchoice = *(grpent optcom)

   grpent = [occur S] [memberkey S] type
          / [occur S] groupname [genericarg]  ; preempted by above
          / [occur S] "(" S group S ")"

   memberkey = type1 S ["^" S] "=>"
             / bareword S ":"
             / value S ":"

   bareword = id

   optcom = S ["," S]

   occur = [uint] "*" [uint]
         / "+"
         / "?"

   uint = DIGIT1 *DIGIT
        / "0x" 1*HEXDIG
        / "0b" 1*BINDIG
        / "0"

   value = number
         / text
         / bytes

   int = ["-"] uint

   ; This is a float if it has fraction or exponent; int otherwise
   number = hexfloat / (int ["." fraction] ["e" exponent ])
   hexfloat = ["-"] "0x" 1*HEXDIG ["." 1*HEXDIG] "p" exponent
   fraction = 1*DIGIT
   exponent = ["+"/"-"] 1*DIGIT

   text = %x22 *SCHAR %x22
   SCHAR = %x20-21 / %x23-5B / %x5D-7E / NONASCII / SESC

   SESC = "\" ( %x22 / "/" / "\" /                 ; \" \/ \\
                %x62 / %x66 / %x6E / %x72 / %x74 / ; \b \f \n \r \t
                (%x75 hexchar) )                   ; \uXXXX

   hexchar = "{" (1*"0" [ hexscalar ] / hexscalar) "}" /
             non-surrogate / (high-surrogate "\" %x75 low-surrogate)
   non-surrogate = ((DIGIT / "A"/"B"/"C" / "E"/"F") 3HEXDIG) /
                   ("D" %x30-37 2HEXDIG )
   high-surrogate = "D" ("8"/"9"/"A"/"B") 2HEXDIG
   low-surrogate = "D" ("C"/"D"/"E"/"F") 2HEXDIG
   hexscalar = "10" 4HEXDIG / HEXDIG1 4HEXDIG
             / non-surrogate / 1*3HEXDIG

   bytes = [bsqual] %x27 *BCHAR %x27
   BCHAR = %x20-26 / %x28-5B / %x5D-7E / NONASCII / SESC / "\'" / CRLF
   bsqual = "h" / "b64"

   id = EALPHA *(*("-" / ".") (EALPHA / DIGIT))
   ALPHA = %x41-5A / %x61-7A
   EALPHA = ALPHA / "@" / "_" / "$"
   DIGIT = %x30-39
   DIGIT1 = %x31-39
   HEXDIG = DIGIT / "A" / "B" / "C" / "D" / "E" / "F"
   HEXDIG1 = DIGIT1 / "A" / "B" / "C" / "D" / "E" / "F"
   BINDIG = %x30-31

   S = *WS
   WS = SP / NL
   SP = %x20
   NL = COMMENT / CRLF
   COMMENT = ";" *PCHAR CRLF
   PCHAR = %x20-7E / NONASCII
   NONASCII = %xA0-D7FF / %xE000-10FFFD
   CRLF = %x0A / %x0D.0A

                    Figure 11: ABNF for CDDL as Updated

Appendix B.  Details about Covering Erratum ID 6543

   This appendix is informative.

   [Err6543] notes that the ABNF used in [RFC8610] for the content of
   byte string literals lumps together byte strings notated as text with
   byte strings notated in base16 (hex) or base64 (but see also updated
   BCHAR rule in Figure 4):

   ; ABNF from RFC 8610:
   bytes = [bsqual] %x27 *BCHAR %x27
   BCHAR = %x20-26 / %x28-5B / %x5D-10FFFD / SESC / CRLF

              Figure 12: Original ABNF from RFC 8610 for BCHAR

B.1.  Change Proposed by Erratum ID 6543

   Erratum ID 6543 proposes handling the two cases in separate ABNF
   rules (where, with an updated SESC, BCHAR obviously needs to be
   updated as above):

   ; Proposal from Erratum ID 6543:
   bytes = %x27 *BCHAR %x27
         / bsqual %x27 *QCHAR %x27
   BCHAR = %x20-26 / %x28-5B / %x5D-10FFFD / SESC / CRLF
   QCHAR = DIGIT / ALPHA / "+" / "/" / "-" / "_" / "=" / WS

     Figure 13: Proposal from Erratum ID 6543 to Split the Byte String
                                   Rules

   This potentially causes a subtle change, which is hidden in the WS
   rule:

   ; ABNF from RFC 8610:
   WS = SP / NL
   SP = %x20
   NL = COMMENT / CRLF
   COMMENT = ";" *PCHAR CRLF
   PCHAR = %x20-7E / %x80-10FFFD
   CRLF = %x0A / %x0D.0A

               Figure 14: ABNF Definition of WS from RFC 8610

   This allows any non-C0 character in a comment, so this fragment
   becomes possible:

   foo = h'
      43424F52 ; 'CBOR'
      0A       ; LF, but don't use CR!
   '

   The current text is not unambiguously saying whether the three
   apostrophes need to be escaped with a \ or not, as in:

   foo = h'
      43424F52 ; \'CBOR\'
      0A       ; LF, but don\'t use CR!
   '

   ... which would be supported by the existing ABNF in [RFC8610].

B.2.  No Further Change Needed after Updating String Literal Grammar

   This document takes the simpler approach of leaving the processing of
   the content of the byte string literal to a semantic step after
   processing the syntax of the bytes and BCHAR rules, as updated by
   Figures 2 and 4 in Section 2.1 (updates prompted by the combination
   of [Err6527] and [Err6278]).

   Therefore, the rules in Figure 14 (as updated by Figure 4) are
   applied to the result of this processing where bsqual is given as h
   or b64.

   Note that this approach also works well with the use of byte strings
   in Section 3 of [RFC9165].  It does require some care when copying-
   and-pasting into CDDL models from ABNF that contains single quotes
   (which may also hide as apostrophes in comments); these need to be
   escaped or possibly replaced by %x27.

   Finally, the approach taken lends support to extending bsqual in CDDL
   similar to the way this is done for CBOR diagnostic notation in
   [EDN-LITERALS].  (Note that, at the time of writing, the processing
   of string literals is quite similar for both CDDL and Extended
   Diagnostic Notation (EDN), except that CDDL has end-of-line comments
   that are ";" based and EDN has two comment syntaxes: one in-line "/"
   based and one end-of-line "#" based.)

Acknowledgments

   Many thanks go to the submitters of the errata reports addressed in
   this document.  In one of the ensuing discussions, Doug Ewell
   proposed defining an ABNF rule "NONASCII", of which we have included
   the essence.  Special thanks to the reviewers Marco Tiloca, Christian
   Amsüss (Shepherd Review and further guidance), Orie Steele (AD Review
   and further guidance), and Éric Vyncke (detailed IESG review).

Author's Address

   Carsten Bormann
   Universität Bremen TZI
   Postfach 330440
   D-28359 Bremen
   Germany
   Phone: +49-421-218-63921
   Email: cabo@tzi.org