MPLS-TP Control Plane Framework

Document Type Replaced Internet-Draft (individual)
Last updated 2010-05-18 (latest revision 2010-02-22)
Replaced by draft-ietf-ccamp-mpls-tp-cp-framework
Stream (None)
Intended RFC status (None)
Expired & archived
plain text pdf html
Stream Stream state (No stream defined)
Document shepherd No shepherd assigned
IESG IESG state Replaced by draft-ietf-ccamp-mpls-tp-cp-framework
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at


The MPLS Transport Profile (MPLS-TP) supports static provisioning of transport paths via a Network Management System (NMS), and dynamic provisioning of transport paths via a control plane. This document provides the framework for MPLS-TP dynamic provisioning, and covers control plane addressing, routing, path computation, signaling, traffic engineering,, and path recovery. MPLS-TP uses GMPLS as the control plane for MPLS-TP LSPs and provides for compatibility with MPLS. The control plane for Pseudowires (PWs) is also covered by this document. Management plane functions such as manual configuration and the initiation of LSP setup are out of scope of this document.


Loa Andersson (
Lou Berger (
Luyuan Fang (
Nabil Bitar (
Attila Takacs (
Martin Vigoureux (
Elisa Bellagamba (

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)