Skip to main content

Registration Data Access Protocol (RDAP) Reverse Search
draft-ietf-regext-rdap-reverse-search-26

The information below is for an old version of the document that is already published as an RFC.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 9536.
Authors Mario Loffredo , Maurizio Martinelli
Last updated 2024-04-11 (Latest revision 2023-11-13)
Replaces draft-loffredo-regext-rdap-reverse-search
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status Proposed Standard
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state Submitted to IESG for Publication
Associated WG milestone
Mar 2023
Submit for publication "Registration Data Access Protocol (RDAP) Reverse search capabilities"
Document shepherd Tom Harrison
Shepherd write-up Show Last changed 2023-08-07
IESG IESG state Became RFC 9536 (Proposed Standard)
Action Holders
(None)
Consensus boilerplate Yes
Telechat date (None)
Responsible AD Murray Kucherawy
Send notices to tomh@apnic.net
IANA IANA review state Version Changed - Review Needed
IANA action state RFC-Ed-Ack
IANA expert review state Expert Reviews OK
IANA expert review comments Expert has approved the RDAP Extensions registration.
draft-ietf-regext-rdap-reverse-search-26
Registration Protocols Extensions                            M. Loffredo
Internet-Draft                                             M. Martinelli
Intended status: Standards Track                     IIT-CNR/Registro.it
Expires: 16 May 2024                                    13 November 2023

        Registration Data Access Protocol (RDAP) Reverse Search
                draft-ietf-regext-rdap-reverse-search-26

Abstract

   The Registration Data Access Protocol (RDAP) does not include query
   capabilities for finding the list of domains related to a set of
   entities matching a given search pattern.  Considering that an RDAP
   entity can be associated with any defined object class and other
   relationships between RDAP object classes exist, a reverse search can
   be applied to other use cases besides the classic domain-entity
   scenario.  This document describes an RDAP extension that allows
   servers to provide a reverse search feature based on the relationship
   defined in RDAP between an object class for search and any related
   object class.  The reverse search based on the domain-entity
   relationship is treated as a particular case.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 16 May 2024.

Copyright Notice

   Copyright (c) 2023 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.

Loffredo & Martinelli      Expires 16 May 2024                  [Page 1]
Internet-Draft             RDAP Reverse search             November 2023

   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Background  . . . . . . . . . . . . . . . . . . . . . . .   3
     1.2.  Conventions Used in This Document . . . . . . . . . . . .   4
   2.  Reverse Search Path Segment Specification . . . . . . . . . .   4
   3.  Reverse Search Definition . . . . . . . . . . . . . . . . . .   5
   4.  Reverse Search Properties Discovery . . . . . . . . . . . . .   5
   5.  Reverse Search Properties Mapping . . . . . . . . . . . . . .   6
   6.  Reverse Search Response Specification . . . . . . . . . . . .   7
   7.  Reverse Search Query Processing . . . . . . . . . . . . . . .   7
   8.  Reverse Searches Based on Entity Details  . . . . . . . . . .   8
   9.  RDAP Conformance  . . . . . . . . . . . . . . . . . . . . . .  10
   10. Implementation Considerations . . . . . . . . . . . . . . . .  10
   11. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  10
     11.1.  RDAP Extensions Registry . . . . . . . . . . . . . . . .  11
     11.2.  RDAP Reverse Search Registries . . . . . . . . . . . . .  11
       11.2.1.  Creation of the RDAP Reverse Search Registries . . .  11
       11.2.2.  Submit Request to IANA . . . . . . . . . . . . . . .  11
       11.2.3.  RDAP Reverse Search Registry . . . . . . . . . . . .  11
         11.2.3.1.  Template . . . . . . . . . . . . . . . . . . . .  11
         11.2.3.2.  Initial Content  . . . . . . . . . . . . . . . .  12
       11.2.4.  RDAP Reverse Search Mapping Registry . . . . . . . .  13
         11.2.4.1.  Template . . . . . . . . . . . . . . . . . . . .  13
         11.2.4.2.  Initial Content  . . . . . . . . . . . . . . . .  14
   12. Privacy Considerations  . . . . . . . . . . . . . . . . . . .  15
   13. Security Considerations . . . . . . . . . . . . . . . . . . .  15
   14. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  16
   15. References  . . . . . . . . . . . . . . . . . . . . . . . . .  16
     15.1.  Normative References . . . . . . . . . . . . . . . . . .  16
     15.2.  Informative References . . . . . . . . . . . . . . . . .  17
   Appendix A.  Paradigms to Enforce Access Control on Reverse Search
           in RDAP . . . . . . . . . . . . . . . . . . . . . . . . .  18
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  20

Loffredo & Martinelli      Expires 16 May 2024                  [Page 2]
Internet-Draft             RDAP Reverse search             November 2023

1.  Introduction

   The protocol described in this specification aims to extend the RDAP
   query capabilities and response to enable reverse search based on the
   relationships defined in RDAP between an object class for search and
   a related object class.  The reverse search based on the domain-
   entity relationship is treated as a particular case of such a generic
   model.

   RDAP providers willing to implement this specification should
   carefully consider its implications on the efficiency (see
   Section 10), the security (see Section 13) and the compliance with
   privacy regulations (see Section 12) of their RDAP service.

1.1.  Background

   Reverse Whois is a service provided by many web applications that
   allows users to find domain names owned by an individual or a company
   starting from the owner's details, such as name and email.  Even if
   it has been considered useful for some legal purposes (e.g.
   uncovering trademark infringements, detecting cybercrimes), its
   availability as a standardized Whois [RFC3912] capability has been
   objected to for two main reasons, which now don't seem to conflict
   with an RDAP implementation.

   The first objection concerns the potential risks of privacy
   violation.  However, the domain name community is considering a new
   generation of Registration Directory Services [ICANN-RDS1]
   [ICANN-RDS2] [ICANN-RA], which provide access to sensitive data under
   some permissible purposes and in accordance with appropriate policies
   for requestor accreditation, authentication and authorization.
   RDAP's reliance on HTTP means that it can make use of common HTTP-
   based approaches to authentication and authorization, making it more
   useful than Whois in the context of such directory services.  Since
   RDAP consequently permits a reverse search implementation complying
   with privacy protection principles, this first objection is not well-
   founded.

   The second objection to the implementation of a reverse search
   capability has been connected with its impact on server processing.
   However, the core RDAP specifications already define search queries,
   with similar processing requirements, so the basis of this objection
   is not clear.

Loffredo & Martinelli      Expires 16 May 2024                  [Page 3]
Internet-Draft             RDAP Reverse search             November 2023

   Reverse searches, such as finding the list of domain names associated
   with contacts or nameservers, may be useful to registrars as well.
   Usually, registries adopt out-of-band solutions to provide results to
   registrars asking for reverse searches on their domains.  Possible
   reasons for such requests are:

   *  the loss of synchronization between the registrar database and the
      registry database;
   *  the need for such data to perform bulk Extensible Provisioning
      Protocol (EPP) [RFC5730] updates (e.g. changing the contacts of a
      set of domains, etc.).

   Currently, RDAP does not provide any means for a client to search for
   the collection of domains associated with an entity [RFC9082].  A
   query (lookup or search) on domains can return the array of entities
   related to a domain with different roles (registrant, registrar,
   administrative, technical, reseller, etc.), but the reverse operation
   is not allowed.  Only reverse searches to find the collection of
   domains related to a nameserver (ldhName or ip) can be requested.
   Since an entity can be in relationship with any RDAP object
   [RFC9083], the availability of a reverse search as largely intended
   can be common to all the object classes allowed for search.  Through
   a further step of generalization, the meaning of reverse search in
   the RDAP context can be extended to include any query for retrieving
   all the objects in relationship with another matching a given search
   pattern.

1.2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

2.  Reverse Search Path Segment Specification

   A generic reverse search path is described by the syntax:

   {searchable-resource-type}/reverse_search/{related-resource-
   type}?<search-condition>

   The path segments are defined as in the following:

   "searchable-resource-type":  it MUST be one of the resource types for
      search defined in Section 3.2 of [RFC9082] (i.e. "domains",
      "nameservers" and "entities") or a resource type extension;

Loffredo & Martinelli      Expires 16 May 2024                  [Page 4]
Internet-Draft             RDAP Reverse search             November 2023

   "related-resource-type":  it MUST be one of the resource types for
      lookup defined in Section 3.1 of [RFC9082] (i.e. "domain",
      "nameserver", "entity", "ip" and "autnum") or a resource type
      extension;

   "search-condition":  a sequence of "property=search pattern"
      predicates separated by the ampersand character ('&', US-ASCII
      value 0x0026).

   While related-resource-type is defined as having one of a number of
   different values, the only reverse searches defined in this document
   are for a related-resource-type of "entity".  Reverse searches for
   the other resource types specified in [RFC9082] and resource type
   extensions may be defined by future documents.

3.  Reverse Search Definition

   Based on the content of Section 2, defining a reverse search means to
   define the triple <searchable resource type, related resource type,
   property> and the mapping with the corresponding RDAP object member.
   The mapping is done through the use of a JSONPath expression
   [I-D.ietf-jsonpath-base].  Reverse searches are registered in the
   Reverse Search registry (see Section 11.2.3), whereas reverse search
   mappings are registered in the Reverse Search Mapping registry (see
   Section 11.2.4).  The reason for having two registries is that it may
   be possible for a single type of reverse search to rely on different
   members, depending on the server's configuration (see Section 5).

   All of the reverse searches defined by this document (see Section 8)
   have property names that are the same as the name of the RDAP object
   member that is the subject of the search.  For example, the reverse
   search with the property name "fn" relies on the value of the "fn"
   member inside the jCard of an entity object.  However, it is not
   necessary that these two names be the same.  In particular, remapping
   of searches as part of the deprecation of an existing member (see
   Section 5) will typically lead to a member with a different name
   being used for the search.

   Servers MUST NOT provide or implement reverse searches or reverse
   search mappings that are not registered with IANA.

4.  Reverse Search Properties Discovery

   Servers complying with this specification MUST extend the help
   response [RFC9083] with the "reverse_search_properties" member which
   contains an array of objects with the following mandatory child
   members:

Loffredo & Martinelli      Expires 16 May 2024                  [Page 5]
Internet-Draft             RDAP Reverse search             November 2023

   "searchableResourceType":  the searchable resource type of the
      reverse search query as defined in Section 2;

   "relatedResourceType":  the related resource type of the reverse
      search query as defined in Section 2;

   "property":  the reverse search property used in the predicate of the
      reverse search query as defined in Section 2;

   An example of the help response including the
   "reverse_search_properties" member is shown in Figure 2.

5.  Reverse Search Properties Mapping

   To permit clients to determine the member used by the server for a
   reverse search, servers MUST detail the mapping that is occurring by
   adding the "reverse_search_properties_mapping" member to the topmost
   object of a reverse search response.  This data is included in the
   search response, rather than in the help response, because it may
   differ depending on the query that is sent to the server.

   Documents that deprecate or restructure RDAP responses such that a
   registered reverse search is no longer able to be used MUST either
   note that the relevant reverse search is no longer available (in the
   case of deprecation) or describe how to continue supporting the
   relevant search by adding another mapping for the reverse search
   property (in the case of restructuring).

   The "reverse_search_properties_mapping" member contains an array of
   objects with the following mandatory child members:

   "property":  the reverse search property used in the predicate of the
      current query as defined in Section 2;

   "propertyPath":  the JSONPath expression of the object member (or
      members) corresponding to the reverse search property.

   The searchable and the related resource types are derived from the
   query, so there is no need to include them in addition to the
   property in this member.

   This member MUST be included for all properties used in the search,
   regardless of whether that property has multiple registered mappings
   as at the time of the search, because new mappings may be registered
   at any time.

   When applied to an object, the JSONPath expression MUST produce a
   list of values, each of which is a JSON number or string.

Loffredo & Martinelli      Expires 16 May 2024                  [Page 6]
Internet-Draft             RDAP Reverse search             November 2023

   An example of a reverse search response including the
   "reverse_search_properties_mapping" member is shown in Figure 3.

6.  Reverse Search Response Specification

   Reverse search responses use the formats defined in section 8 of
   [RFC9083], which correspond to the searchable resource types defined
   in Section 2.

7.  Reverse Search Query Processing

   To process a reverse search, the server returns the objects from its
   data store that are of type searchable-resource-type and that match
   each of the predicates from the search conditions.  To determine
   whether an object matches a predicate, the server:

   *  applies the mapping it uses for the reverse search property to the
      object in order to generate a list of values, each of which MUST
      be a JSON number or string; and
   *  checks whether the search pattern matches one or more of those
      values.

   A search pattern matches a value where it equals the string
   representation of the value, or where it is a match for the value in
   accordance with the partial string matching behaviour defined in
   section 4.1 of [RFC9082].

   Objects are only included in the search results if they satisfy all
   included predicates.  This includes predicates that are for the same
   property: it is necessary in such a case for the related object to
   match against each of those predicates.

   Servers MUST return an HTTP 501 (Not Implemented) [RFC9110] response
   to inform clients of unsupported reverse searches.

   Based on their policy, servers MAY restrict how predicates are used
   to make a valid search condition, by returning a 400 (Bad Request)
   response when a problematic request is received.

   A given reverse search or reverse search mapping MAY define
   additional or alternative search behaviour past that set out in this
   section.

Loffredo & Martinelli      Expires 16 May 2024                  [Page 7]
Internet-Draft             RDAP Reverse search             November 2023

8.  Reverse Searches Based on Entity Details

   Since in RDAP, an entity can be associated with any other object
   class, the most common kind of reverse search is one based on an
   entity's details.  Such reverse searches arise from the query model
   by setting the related resource type to "entity".

   By selecting a specific searchable resource type, the resulting
   reverse search aims at retrieving all the objects (e.g. all the
   domains) that are related to any entity object matching the search
   conditions.

   This section defines the reverse search properties servers SHOULD
   support for the domain, nameserver, and entity searchable resource
   types and the entity related resource type:

   Reverse search property:  role
   RDAP member path:  $.entities[*].roles
   Reference:  Section 10.2.4 of [RFC9083]

   Reverse search property:  handle
   RDAP member path:  $.entities[*].handle
   Reference:  Section 5.1 of [RFC9083]

   Reverse search property:  fn
   RDAP member path:  $.entities[*].vcardArray[1][?(@[0]=='fn')][3]
   Reference:  Section 6.2.1 of [RFC6350]

   Reverse search property:  email
   RDAP member path:  $.entities[*].vcardArray[1][?(@[0]=='email')][3]
   Reference:  Section 6.4.2 of [RFC6350]

   The presence of a predicate on the reverse search property "role"
   means that the RDAP response property "roles" MUST contain at least
   the specified role.

   The last two properties are related to jCard elements [RFC7095], but
   the field references are to vCard [RFC6350], since jCard is the JSON
   format for vCard.

   Examples of reverse search paths based on the domain-entity
   relationship are presented in Figure 1.

    /domains/reverse_search/entity?handle=CID-40*&role=technical

    /domains/reverse_search/entity?fn=Bobby*&role=registrant

    /domains/reverse_search/entity?handle=RegistrarX&role=registrar

Loffredo & Martinelli      Expires 16 May 2024                  [Page 8]
Internet-Draft             RDAP Reverse search             November 2023

                Figure 1: Examples of reverse search queries

   An example of the help response including the reverse search
   properties supported is shown below.

      {
        "rdapConformance": [
          "rdap_level_0",
          "reverse_search"
        ],
        ...
        "reverse_search_properties": [
          {
            "searchableResourceType": "domains",
            "relatedResourceType": "entity",
            "property": "fn"
          },
          {
            "searchableResourceType": "domains",
            "relatedResourceType": "entity",
            "property": "handle"
          },
          {
            "searchableResourceType": "domains",
            "relatedResourceType": "entity",
            "property": "email"
          },
          {
            "searchableResourceType": "domains",
            "relatedResourceType": "entity",
            "property": "role"
          }
        ],
        ...
      }

            Figure 2: An example of help response including the
                 "reverse_search_properties_mapping" member

   An example of a response including the mapping that is occurring for
   the first reverse search in Figure 1 is shown below.

Loffredo & Martinelli      Expires 16 May 2024                  [Page 9]
Internet-Draft             RDAP Reverse search             November 2023

      {
        "rdapConformance": [
          "rdap_level_0",
          "reverse_search"
        ],
        ...
        "reverse_search_properties_mapping": [
          {
            "property": "handle",
            "propertyPath": "$.entities[*].handle"
          },
          {
            "property": "role",
            "propertyPath": "$.entities[*].roles"
          }
        ],
        ...
      }

           Figure 3: An example of an RDAP response including the
                     "reverse_search_properties" member

9.  RDAP Conformance

   Servers complying with this specification MUST include the value
   "reverse_search" in the rdapConformance property of the help response
   [RFC9083] and any other response including the
   "reverse_search_properties_mapping" member.  The information needed
   to register this value in the "RDAP Extensions" registry is described
   in Section 11.1.

10.  Implementation Considerations

   To limit the impact of processing the search predicates, servers are
   RECOMMENDED to make use of techniques to speed up the data retrieval
   in their underlying data store such as indexes or similar.  In
   addition, risks with respect to performance degradation or result set
   generation can be mitigated by adopting practices used for standard
   searches, e.g. restricting the search functionality, limiting the
   rate of search requests according to the user's authorization,
   truncating and paging the results [RFC8977], and returning partial
   responses [RFC8982].

11.  IANA Considerations

Loffredo & Martinelli      Expires 16 May 2024                 [Page 10]
Internet-Draft             RDAP Reverse search             November 2023

11.1.  RDAP Extensions Registry

   IANA is requested to register the following value in the "RDAP
   Extensions" registry:

   *  Extension identifier: reverse_search
   *  Registry operator: Any
   *  Published specification: This document.
   *  Contact: IETF <iesg@ietf.org>
   *  Intended usage: This extension identifier is used for both URI
      path segments and response extensions related to the reverse
      search in RDAP.

11.2.  RDAP Reverse Search Registries

11.2.1.  Creation of the RDAP Reverse Search Registries

   IANA is requested to create the "RDAP Reverse Search" and "RDAP
   Reverse Search Mapping" registries within the group "Registration
   Data Access Protocol (RDAP)".

   These registries follow the Specification Required process as defined
   in Section 4.5 of [RFC8126].

   The designated expert should prevent collisions and confirm that
   suitable documentation, as described in Section 4.6 of [RFC8126], is
   available to ensure interoperability.

   Creators of either new RDAP reverse searches or new mappings for
   registered reverse searches SHOULD NOT replicate functionality
   already available by way of other documents referenced in these
   registries.  Creators MAY register additional reverse search mappings
   for existing properties, but they SHOULD NOT map a registered reverse
   search property to a response field with a meaning other than that of
   the response fields referenced by the mappings already registered for
   that property.  In other words, all the mappings for a reverse search
   property MUST point to response fields with the same meaning.

11.2.2.  Submit Request to IANA

   Registration requests can be sent to <iana@iana.org>.

11.2.3.  RDAP Reverse Search Registry

11.2.3.1.  Template

   "Searchable Resource Type":  The searchable resource type of the

Loffredo & Martinelli      Expires 16 May 2024                 [Page 11]
Internet-Draft             RDAP Reverse search             November 2023

      reverse search query (Section 2) including the reverse search
      property.  Multiple reverse search properties differing only by
      this field can be grouped together by listing all the searchable
      resource types separated by comma (see Section 11.2.3.2).

   "Related Resource Type":  The related resource type of the reverse
      search query (Section 2) including the reverse search property.

   "Property":  The name of the reverse search property.

   "Description":  A brief human-readable text describing the reverse
      search property.

   "Registrant Name":  The name of the person registering the reverse
      search property.

   "Registrant Contact Information":  An email address, postal address,
      or some other information to be used to contact the registrant.

   "Reference":  Document (e.g. the RFC number) and section reference
      where the reverse search property is specified.

   The combination of "Searchable Resource Type", "Related Resource
   Type" and "Property" MUST be unique across the registry entries.

11.2.3.2.  Initial Content

   IANA is requested to register the following entries in the "RDAP
   Reverse Search" registry.

   For all entries, the common values are shown in Table 1 whereas the
   specific values are shown in Table 2.

Loffredo & Martinelli      Expires 16 May 2024                 [Page 12]
Internet-Draft             RDAP Reverse search             November 2023

    +================================+================================+
    | Registry Property              | Value                          |
    +================================+================================+
    | Searchable Resource Type       | domains, nameservers, entities |
    +--------------------------------+--------------------------------+
    | Related Resource Type          | entity                         |
    +--------------------------------+--------------------------------+
    | Registrant Name                | IETF                           |
    +--------------------------------+--------------------------------+
    | Registrant Contact Information | iesg@ietf.org                  |
    +--------------------------------+--------------------------------+
    | Reference                      | This document, Section 8       |
    +--------------------------------+--------------------------------+

        Table 1: Common values for all entries in the "RDAP Reverse
                              Search" registry

        +==========+==============================================+
        | Property | Description                                  |
        +==========+==============================================+
        | fn       | The server supports the domain/nameserver/   |
        |          | entity search based on the full name (a.k.a. |
        |          | formatted name) of an associated entity      |
        +----------+----------------------------------------------+
        | handle   | The server supports the domain/nameserver/   |
        |          | entity search based on the handle of an      |
        |          | associated entity                            |
        +----------+----------------------------------------------+
        | email    | The server supports the domain/nameserver/   |
        |          | entity search based on the email address of  |
        |          | an associated entity                         |
        +----------+----------------------------------------------+
        | role     | The server supports the domain/nameserver/   |
        |          | entity search based on the role of an        |
        |          | associated entity                            |
        +----------+----------------------------------------------+

           Table 2: Specific values for all entries in the "RDAP
                          Reverse Search" registry

11.2.4.  RDAP Reverse Search Mapping Registry

11.2.4.1.  Template

   "Searchable Resource Type":  The same as defined in the "Reverse
      Search Registry".

   "Related Resource Type":  The same as defined in the "Reverse Search

Loffredo & Martinelli      Expires 16 May 2024                 [Page 13]
Internet-Draft             RDAP Reverse search             November 2023

      Registry".

   "Property":  The same as defined in the "Reverse Search Registry".

   "Property Path":  The JSONPath of the RDAP property this reverse
      search property maps to.

   "Registrant Name":  The name of the person registering this reverse
      search property mapping.

   "Registrant Contact Information":  The same as defined in the
      "Reverse Search Registry".

   "Reference":  Document (e.g. the RFC number) and section reference
      where this reverse search property mapping is specified.

   The combination of "Searchable Resource Type", "Related Resource
   Type", "Property" and "Property Path" MUST be unique across the
   registry entries.

11.2.4.2.  Initial Content

   IANA is requested to register the following entries in the "RDAP
   Reverse Search Mapping" registry.

   For all entries, the common values are the same as defined in the
   "RDAP Reverse Search" registry (see Table 1) whereas the specific
   values are shown in Table 3.

      +==========+==================================================+
      | Property | Property Path                                    |
      +==========+==================================================+
      | fn       | $.entities[*].vcardArray[1][?(@[0]=='fn')][3]    |
      +----------+--------------------------------------------------+
      | handle   | $.entities[*].handle                             |
      +----------+--------------------------------------------------+
      | email    | $.entities[*].vcardArray[1][?(@[0]=='email')][3] |
      +----------+--------------------------------------------------+
      | role     | $.entities[*].roles                              |
      +----------+--------------------------------------------------+

           Table 3: Specific values for all entries in the "RDAP
                      Reverse Search Mapping" registry

Loffredo & Martinelli      Expires 16 May 2024                 [Page 14]
Internet-Draft             RDAP Reverse search             November 2023

12.  Privacy Considerations

   The search functionality defined in this document may affect the
   privacy of entities in the registry (and elsewhere) in various ways:
   see [RFC6973] for a general treatment of privacy in protocol
   specifications.  Registry operators should be aware of the tradeoffs
   that result from implementation of this functionality.

   Many jurisdictions have laws or regulations that restrict the use of
   "Personal Data", per the definition in [RFC6973].  Given that,
   registry operators should ascertain whether the regulatory
   environment in which they operate permits implementation of the
   functionality defined in this document.

   In those cases where this functionality makes use of sensitive
   information, it MUST only be accessible to authorized users supported
   by lawful basis.

   Since reverse search requests and responses could contain Personally
   Identifiable Information (PII), reverse search functionality MUST be
   available over HTTPS only.

   Providing reverse search in RDAP carries the following threats as
   described in [RFC6973]:

   *  Correlation
   *  Disclosure
   *  Misuse of information

   Therefore, RDAP providers need to mitigate the risk of those threats
   by implementing appropriate measures supported by security services
   (see Section 13).

13.  Security Considerations

   Security services required to provide controlled access to the
   operations specified in this document are described in [RFC7481].  A
   non-exhaustive list of access control paradigms an RDAP provider can
   implement is presented in Appendix A.

   As an additional measure to enforce security by preventing reverse
   searches to be accessed from unauthorized users, the RDAP providers
   may consider to physically separate the reverse search endpoints from
   the other ones by configuring a proxy routing the reverse searches to
   a dedicated backend server and leveraging further security services
   offered by other protocol layers such as digital certificates and IP
   whitelisting.

Loffredo & Martinelli      Expires 16 May 2024                 [Page 15]
Internet-Draft             RDAP Reverse search             November 2023

   Finally, the specification of the relationship within the reverse
   search path allows the RDAP servers to implement different
   authorization policies on a per-relationship basis.

14.  Acknowledgements

   The authors would like to acknowledge the following individuals for
   their contributions to this document: Francesco Donini, Scott
   Hollenbeck, Francisco Arias, Gustavo Lozano, Eduardo Alvarez, Ulrich
   Wisser, James Gould and Pawel Kowalik.

   Tom Harrison and Jasdip Singh provided relevant feedback and constant
   support to the implementation of this proposal.  Their contributions
   have been greatly appreciated.

15.  References

15.1.  Normative References

   [I-D.ietf-jsonpath-base]
              Gössner, S., Normington, G., and C. Bormann, "JSONPath:
              Query expressions for JSON", Work in Progress, Internet-
              Draft, draft-ietf-jsonpath-base-21, 24 September 2023,
              <https://datatracker.ietf.org/doc/html/draft-ietf-
              jsonpath-base-21>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC6350]  Perreault, S., "vCard Format Specification", RFC 6350,
              DOI 10.17487/RFC6350, August 2011,
              <https://www.rfc-editor.org/info/rfc6350>.

   [RFC7095]  Kewisch, P., "jCard: The JSON Format for vCard", RFC 7095,
              DOI 10.17487/RFC7095, January 2014,
              <https://www.rfc-editor.org/info/rfc7095>.

   [RFC7481]  Hollenbeck, S. and N. Kong, "Security Services for the
              Registration Data Access Protocol (RDAP)", STD 95,
              RFC 7481, DOI 10.17487/RFC7481, March 2015,
              <https://www.rfc-editor.org/info/rfc7481>.

   [RFC7942]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", BCP 205,
              RFC 7942, DOI 10.17487/RFC7942, July 2016,
              <https://www.rfc-editor.org/info/rfc7942>.

Loffredo & Martinelli      Expires 16 May 2024                 [Page 16]
Internet-Draft             RDAP Reverse search             November 2023

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC9082]  Hollenbeck, S. and A. Newton, "Registration Data Access
              Protocol (RDAP) Query Format", STD 95, RFC 9082,
              DOI 10.17487/RFC9082, June 2021,
              <https://www.rfc-editor.org/info/rfc9082>.

   [RFC9083]  Hollenbeck, S. and A. Newton, "JSON Responses for the
              Registration Data Access Protocol (RDAP)", STD 95,
              RFC 9083, DOI 10.17487/RFC9083, June 2021,
              <https://www.rfc-editor.org/info/rfc9083>.

   [RFC9110]  Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
              Ed., "HTTP Semantics", STD 97, RFC 9110,
              DOI 10.17487/RFC9110, June 2022,
              <https://www.rfc-editor.org/info/rfc9110>.

15.2.  Informative References

   [ICANN-RA] Internet Corporation For Assigned Names and Numbers,
              "Registry Agreement", July 2017,
              <https://newgtlds.icann.org/sites/default/files/
              agreements/agreement-approved-31jul17-en.pdf>.

   [ICANN-RDS1]
              Internet Corporation For Assigned Names and Numbers,
              "Final Report from the Expert Working Group on gTLD
              Directory Services: A Next-Generation Registration
              Directory Service (RDS)", June 2014,
              <https://www.icann.org/en/system/files/files/final-report-
              06jun14-en.pdf>.

   [ICANN-RDS2]
              Internet Corporation For Assigned Names and Numbers,
              "Final Issue Report on a Next-Generation gTLD RDS to
              Replace WHOIS", October 2015,
              <http://whois.icann.org/sites/default/files/files/final-
              issue-report-next-generation-rds-07oct15-en.pdf>.

Loffredo & Martinelli      Expires 16 May 2024                 [Page 17]
Internet-Draft             RDAP Reverse search             November 2023

   [OIDCC]    OpenID Foundation, "OpenID Connect Core incorporating
              errata set 1", November 2014,
              <http://openid.net/specs/openid-connect-core-1_0.html>.

   [RFC3912]  Daigle, L., "WHOIS Protocol Specification", RFC 3912,
              DOI 10.17487/RFC3912, September 2004,
              <https://www.rfc-editor.org/info/rfc3912>.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
              <https://www.rfc-editor.org/info/rfc5730>.

   [RFC6973]  Cooper, A., Tschofenig, H., Aboba, B., Peterson, J.,
              Morris, J., Hansen, M., and R. Smith, "Privacy
              Considerations for Internet Protocols", RFC 6973,
              DOI 10.17487/RFC6973, July 2013,
              <https://www.rfc-editor.org/info/rfc6973>.

   [RFC8977]  Loffredo, M., Martinelli, M., and S. Hollenbeck,
              "Registration Data Access Protocol (RDAP) Query Parameters
              for Result Sorting and Paging", RFC 8977,
              DOI 10.17487/RFC8977, January 2021,
              <https://www.rfc-editor.org/info/rfc8977>.

   [RFC8982]  Loffredo, M. and M. Martinelli, "Registration Data Access
              Protocol (RDAP) Partial Response", RFC 8982,
              DOI 10.17487/RFC8982, February 2021,
              <https://www.rfc-editor.org/info/rfc8982>.

Appendix A.  Paradigms to Enforce Access Control on Reverse Search in
             RDAP

   Access control can be implemented according to different paradigms
   introducing increasingly stringent rules.  The paradigms reported
   here in the following leverage the capabilities either built-in or
   provided as extensions by the OpenID Connect [OIDCC]:

   *  Role-Based Access Control (RBAC): access rights are granted
      depending on roles.  Generally, this is done by grouping users
      into fixed categories and assigning static grants to each
      category.  A more dynamic approach can be implemented by using the
      OpenID Connect "scope" claim;
   *  Purpose-Based Access Control (PBAC): access rules are based on the
      notion of purpose, being the intended use of some data by a user.
      It can be implemented by tagging a request with the usage purpose
      and making the RDAP server check the compliance between the given
      purpose and the control rules applied to the data to be returned;

Loffredo & Martinelli      Expires 16 May 2024                 [Page 18]
Internet-Draft             RDAP Reverse search             November 2023

   *  Attribute-Based Access Control (ABAC): rules to manage access
      rights are evaluated and applied according to specific attributes
      describing the context within which data are requested.  It can be
      implemented by setting within an out-of-band process additional
      OpenID Connect claims describing the request context and making
      the RDAP server check the compliance between the given context and
      the control rules applied to the data to be returned;
   *  Time-Based Access Control (TBAC): data access is allowed for a
      limited time only.  It can be implemented by assigning the users
      with temporary credentials linked to access grants whose scope is
      limited.

   With regard to the privacy threats reported in Section 12,
   correlation and disclosure can be mitigated by minimizing both the
   request features and the response data based on user roles (i.e.
   RBAC).  Misuse can be mitigated by checking for the purpose of the
   request (i.e.  PBAC).  It can be accomplished according to the
   following approaches:

   *  Full Trust: the registry trusts the fairness of an accredited
      user.  The requestor is always legitimized to submit his requests
      under a lawful basis.  Additionally, he can be required to specify
      the purpose as either a claim of his account or a query parameter.
      In the former case, the purpose is assumed to be the same for
      every request.  In the latter case, the purpose must be one of
      those associated to the user;
   *  Zero Trust: the registry requires documents assessing that the
      requestor is legitimized to submit a given request.  It can be
      implemented by assigning the requestor with temporary OpenID
      account linked to the given request (i.e.  TBAC) and describing
      the request through a set of claims (i.e.  ABAC).  The association
      between the temporary account and the claims about the request is
      made by an out-of-band application.  In so doing, the RDAP server
      is able to check that the incoming request is consistent with the
      request claims linked to the temporary account.

   The two approaches can be used together:

   *  The former is suitable for users carrying out a task in the public
      interest, or exercising their official authority (e.g. an officer
      of a cybercrime agency).  Similarly, registrars can submit reverse
      searches on their domains and contacts based on their contractual
      relationship with the domain holders.  In this case, the query
      results can be restricted to those pertaining a registrar by
      adding an implicit predicate to the search condition.
   *  The latter can be taken to allow domain name dispute resolution
      service providers to request information in defense of the
      legitimate interests of complainants.

Loffredo & Martinelli      Expires 16 May 2024                 [Page 19]
Internet-Draft             RDAP Reverse search             November 2023

Authors' Addresses

   Mario Loffredo
   IIT-CNR/Registro.it
   Via Moruzzi,1
   56124 Pisa
   Italy
   Email: mario.loffredo@iit.cnr.it
   URI:   http://www.iit.cnr.it

   Maurizio Martinelli
   IIT-CNR/Registro.it
   Via Moruzzi,1
   56124 Pisa
   Italy
   Email: maurizio.martinelli@iit.cnr.it
   URI:   http://www.iit.cnr.it

Loffredo & Martinelli      Expires 16 May 2024                 [Page 20]