Transparent Interconnection of Lots of Links (TRILL) over IP
draft-mrw-trill-over-ip-04
Document | Type |
Replaced Internet-Draft
(trill WG)
Expired & archived
|
|
---|---|---|---|
Authors | Margaret Cullen , Donald E. Eastlake 3rd , Dacheng Zhang | ||
Last updated | 2014-02-27 (Latest revision 2014-02-01) | ||
Replaced by | draft-ietf-trill-over-ip | ||
RFC stream | Internet Engineering Task Force (IETF) | ||
Intended RFC status | Proposed Standard | ||
Formats | |||
Additional resources | Mailing list discussion | ||
Stream | WG state | Adopted by a WG | |
Document shepherd | (None) | ||
IESG | IESG state | Replaced by draft-ietf-trill-over-ip | |
Consensus boilerplate | Unknown | ||
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
The Transparent Interconnection of Lots of Links (TRILL) protocol is implemented by devices called TRILL Switches or RBridges (Routing Bridges). TRILL supports both point-to-point and multi-access links and is designed so that a variety of link protocols can be used between TRILL switch ports. This document standardizes methods for encapsulating TRILL in IP(v4 or v6) to provide a unified TRILL campus.
Authors
Margaret Cullen
Donald E. Eastlake 3rd
Dacheng Zhang
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)