Concluded WG Transparent Interconnection of Lots of Links (trill)

Note: The data for concluded WGs is occasionally incorrect.

WG Name Transparent Interconnection of Lots of Links
Acronym trill
Area Routing Area (rtg)
State Concluded
Charter charter-ietf-trill-05 Approved
Document dependencies
Additional resources Issue tracker, Wiki
Personnel Chairs Jon Hudson, Susan Hares
Area Director Alia Atlas
Secretary Donald E. Eastlake 3rd
Mailing list Address trill@ietf.org
To subscribe https://www.ietf.org/mailman/listinfo/trill
Archive https://mailarchive.ietf.org/arch/browse/trill/

Final Charter for Working Group

The TRILL WG has specified a solution for transparent unicast
shortest-path and multi-destination frame routing in multi-hop
networks with arbitrary topology. End stations, including Layer 3
routers, connected to TRILL switches are assumed to be IEEE 802.1Q
compliant end stations. TRILL switches may be interconnected with
multi-access or point-to-point links of arbitrary technology.

The current work of the working group is around operational support
and additional extensions and optimizations of TRILL for the
properties of the networks on which it is deployed. The TRILL WG may
also produce corrections, clarifications, and updates of existing
TRILL RFCs.

The WG will work on the following items:

(1) Following on from the TRILL OAM requirements (RFC 6905), specify a
framework and specific protocols for the handling of Operations,
Administration, and Maintenance (OAM) in networks using TRILL,
focusing on fault management and performance and preferring existing
OAM mechanisms that might apply to TRILL, such as SNMP, Netconf/Yang
and mechanisms based on the IEEE 802.1 CFM framework.

(2) Specify protocols to support "active-active" service to end
stations that are multiply connected to a TRILL campus to provide them
with flow level traffic spreading and rapid adaptation to link failure
similar to that provided by TRILL for TRILL switches.

(3) Develop, within the TRILL protocol context, protocol
specifications for broadcast/multicast (multi-destination) frame
reduction. Examples: protocol extensions supporting replacement of
broadcast/multicast by unicast where appropriate; ARP/ND (Neighbor
Discovery) reduction through extensions to the TRILL ESADI protocol.

(4) Specify protocols for TRILL over pseudowires and TRILL over IP
tunnels, for example to connect branch office TRILL switches to a
central TRILL campus over the Internet.

(5) Specify extensions to the TRILL protocol to support multi-level
routing to improve scaling and multi-topology routing to provide
different topologies for different classes or types of traffic, based
existing IS-IS multi-level and multi-topology routing facilities.

(6) Specify a reduced TRILL control plane protocol for
interconnection, with improved error isolation, between TRILL campuses
under coordinated management.

(7) Analyze the use of IS-IS security (RFC 5310) in TRILL and
determine if any work is needed to accommodate any specific TRILL
control or data plane security leveraging IS-IS security.

(8) Produce an interoperability / implementation report for TRILL.

The TRILL WG will continue to work with other IETF working groups such
as the ISIS WG, and SDO groups such as IEEE 802.1 through established
inter-WG relationships and SDO liaison processes, including early and
WG last call review by the ISIS WG of documents extending IS-IS
routing.

Milestones

Date Milestone Associated documents
Jul 2017 Re-charter or shut down the WG
Nov 2016 Submit RBridge support of Data Center Bridging to IESG for publication as Proposed Standard (draft-eastlake-trill-rbridge-dcb)
May 2016 Initial WG draft on TRILL IS-IS Security
Mar 2016 Submit Multi-topology TRILL to IESG for Proposed Standard
Feb 2016 Submit Multi-level TRILL to IESG for Proposed Standard
Jan 2016 Submit TRILL ARP/ND optimizations to IESG for publication as Proposed Standard
Dec 2015 Submit TRILL-over-IP to IESG for Proposed Standard
Dec 2015 Submit Directory Assistance Mechanisms to IESG for Proposed Standard
Dec 2014 Submit Active-Active to IESG for Proposed Standard

Done milestones

Date Milestone Associated documents
Done Initial WG draft on ARP/ND optimizations
Done Submit OAM Performance Management to IESG for Proposed Standard
Done Submit OAM Fault Management to IESG for Proposed Standard
Done Submit RBridge OAM framework document to the IESG for publication
Done Initial WG draft on TRILL over IP
Done Initial WG document on RBridge OAM performance management
Done Initial WG document on RBridge OAM fault management
Done Submit RBridge OAM requirements document to the IESG for publication
Done Initial WG framework document on RBridge OAM
Done Initial WG draft on RBridge OAM (draft-bond-trill-rbridge-oam)
Done Submit TRILL Header Options to IESG for publication as Proposed Standard (draft-ietf-trill-rbridge-options)
Done Initial WG draft on RBridge OAM (draft-bond-trill-rbridge-oam)
Done Initial WG draft on VLAN Mapping (draft-ietf-trill-rbridge-vlan-mapping)
Done Initial WG draft on trill adjacency state machine (draft-ietf-trill-adj)
Done Submit RBridge MIB module to IESG for publication as Proposed Standard (draft-ietf-trill-rbridge-mib)
Done Submit trill adjacency state machine to IESG for publication as Proposed Standard (draft-ietf-trill-adj)
Done Base protocol specification submitted to the IESG for publication as a Proposed Standard RFC
Done Submit base protocol specification to IEEE/IETF expert review
Done Submit problem statement and applicability to IESG for Informational RFC
Done Choose routing protocol(s) that can meet the requirements
Done Accept problem statement and applicability as a WG work item
Done Accept base protocol specification as a WG document