BFD Encapsulated in Large Packets
draft-ietf-bfd-large-packets-16

Network Working Group                                            J. Haas
Internet-Draft                                    Juniper Networks, Inc.
Intended status: Standards Track                                   A. Fu
Expires: 19 July 2025                                     Bloomberg L.P.
                                                         15 January 2025

                   BFD Encapsulated in Large Packets
                    draft-ietf-bfd-large-packets-16

Abstract

   The Bidirectional Forwarding Detection (BFD) protocol is commonly
   used to verify connectivity between two systems.  BFD packets are
   typically very small.  It is desirable in some circumstances to know
   that not only is the path between two systems reachable, but also
   that it is capable of carrying a payload of a particular size.  This
   document specifies how to implement such a mechanism using BFD in
   Asynchronous mode.

   YANG modules for managing this mechanism are also defined in this
   document.  These YANG modules augment the existing BFD YANG modules
   defined in RFC 9314.  The YANG modules in this document conform to
   the Network Management Datastore Architecture (NMDA) (RFC 8342).

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 19 July 2025.

Copyright Notice

   Copyright (c) 2025 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

Haas & Fu                 Expires 19 July 2025                  [Page 1]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Requirements Language . . . . . . . . . . . . . . . . . . . .   3
   3.  BFD Encapsulated in Large Packets . . . . . . . . . . . . . .   3
   4.  Implementation and Deployment Considerations  . . . . . . . .   3
     4.1.  Implementations that do not support Large BFD Packets . .   4
     4.2.  Selecting MTU size to be detected . . . . . . . . . . . .   4
     4.3.  Detecting MTU Mismatches  . . . . . . . . . . . . . . . .   5
     4.4.  Detecting MTU Changes . . . . . . . . . . . . . . . . . .   5
     4.5.  Equal Cost Multiple Paths (ECMP) or other Load Balancing
           Considerations  . . . . . . . . . . . . . . . . . . . . .   5
     4.6.  S-BFD . . . . . . . . . . . . . . . . . . . . . . . . . .   6
   5.  BFD Encapsulated in Large Packets YANG Module . . . . . . . .   6
     5.1.  Data Model Overview . . . . . . . . . . . . . . . . . . .   6
     5.2.  YANG Module . . . . . . . . . . . . . . . . . . . . . . .   7
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .  11
     6.1.  YANG Security Considerations  . . . . . . . . . . . . . .  11
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  12
     7.1.  The "IETF XML" Registry . . . . . . . . . . . . . . . . .  12
     7.2.  The "YANG Module Names" Registry  . . . . . . . . . . . .  12
   8.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .  13
   9.  Normative References  . . . . . . . . . . . . . . . . . . . .  13
   10. Informative References  . . . . . . . . . . . . . . . . . . .  14
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  15

1.  Introduction

   The Bidirectional Forwarding Detection (BFD) [RFC5880] protocol is
   commonly used to verify connectivity between two systems.  However,
   some applications may require that the Path MTU [RFC1191] between
   those two systems meets a certain minimum criterion.  When the Path
   MTU decreases below the minimum threshold, those applications may
   wish to consider the path unusable.

   BFD may be encapsulated in a number of transport protocols.  An
   example of this is single-hop BFD [RFC5881].  In that case, the link
   MTU configuration is typically enough to guarantee communication
   between the two systems for that size MTU.  BFD Echo mode

Haas & Fu                 Expires 19 July 2025                  [Page 2]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

   (Section 6.4 of [RFC5880]) is sufficient to permit verification of
   the Path MTU of such directly connected systems.  Previous proposals
   ([I-D.haas-xiao-bfd-echo-path-mtu]) have been made for testing Path
   MTU for such directly connected systems.  However, in the case of
   multi-hop BFD [RFC5883], this guarantee does not hold.

   The encapsulation of BFD in multi-hop sessions is a simple UDP
   packet.  The BFD elements of procedure (Section 6.8.6 of [RFC5880])
   covers validating the BFD payload.  However, the specification is
   silent on the length of the encapsulation that is carrying the BFD
   PDU.  While it is most common that the transport protocol payload
   (i.e., UDP) length is the exact size of the BFD PDU, this is not
   required by the elements of procedure.  This leads to the possibility
   that the transport protocol length may be larger than the contained
   BFD PDU.

2.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

3.  BFD Encapsulated in Large Packets

   Support for BFD between two systems is typically configured, even if
   the actual session may be dynamically created by a client protocol.
   A new BFD variable is defined in this document:

   bfd.PaddedPduSize
      The BFD transport protocol payload size (in bytes) is increased to
      this value.  The contents of this additional payload MUST be zero.
      The contents of this additional payload SHOULD NOT be validated by
      the receiver.  The minimum size of this variable MUST NOT be
      smaller than permitted by the element of BFD procedure; 24 or 26 -
      see Section 6.8.6 of [RFC5880].

   The Don't Fragment bit (Section 2.3 of [RFC0791]) of the IP payload,
   when using IPv4 encapsulation, MUST be set.

4.  Implementation and Deployment Considerations

Haas & Fu                 Expires 19 July 2025                  [Page 3]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

4.1.  Implementations that do not support Large BFD Packets

   While this document proposes no change to the BFD protocol,
   implementations may not permit arbitrarily padded transport PDUs to
   carry BFD packets.  While Section 6 of [RFC5880] warns against
   excessive pedantry, implementations may not work with this mechanism
   without additional support.

   [RFC5880], section 6.8.6, discusses the procedures for receiving BFD
   Control packets.  The length of the BFD Control packet is validated
   to be less than or equal to the payload of the encapsulating
   protocol.  When a receiving implementation is incapable of processing
   Large BFD Packets, it could manifest in one of two possible ways:

   *  A receiving BFD implementation is incapable of accepting Large BFD
      Packets.  This is identical to the packet being discarded.

   *  A receiving BFD implementation is capable of accepting Large BFD
      Packets, but the Control packet is improperly rejected during
      validation procedures.  This is identical to the packet being
      discarded.

   In each of these cases, the BFD state machine would behave as if it
   were not receiving Control packets and the receiving implementation
   would follow normal BFD procedures regarding not having received
   control packets.

   If Large BFD Packets is enabled on a session that is already in the
   Up state and the remote BFD system does not, or cannot support
   receiving the padded BFD control packets, the session will go Down.

4.2.  Selecting MTU size to be detected

   Since the consideration is path MTU, BFD sessions using this feature
   only need to use an appropriate value of bfd.PaddedPduSize
   appropriate to exercise the path MTU for the desired application.
   This may be significantly smaller than the system's link MTU; e.g.,
   desired path MTU is 1512 bytes while the interface MTU that BFD with
   large packets is running on is 9000 bytes.

   In the case multiple BFD clients desire to test the same BFD
   endpoints using different bfd.PaddedPduSize parameters,
   implementations SHOULD select the largest bfd.PaddedPduSize parameter
   from the configured sessions.  This is similar to how implementations
   of BFD select the most aggressive timing parameters for multiple
   sessions to the same endpoint.  Failure to select the largest size
   will result in BFD sessions going to the Up state and dependent
   applications not having their MTU requirements satisfied.

Haas & Fu                 Expires 19 July 2025                  [Page 4]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

4.3.  Detecting MTU Mismatches

   The accepted MTU for an interface is impacted by packet encapsulation
   considerations at a given layer; e.g., layer 2, layer 3, tunnel, etc.
   A common misconfiguration of interface parameters is inconsistent
   MTU.  In the presence of inconsistent MTU, it is possible for
   applications to have unidirectional connectivity.

   When it is necessary for an application using BFD with Large Packets
   to test the bi-directional Path MTU, it is necessary to configure the
   bfd.PaddedPduSize parameter on each side of the BFD session.  E.g.,
   if the desire is to verify a 1500 byte MTU in both directions on an
   Ethernet or point to point link, each side of the BFD session must
   have bfd.PaddedPduSize set to 1500.  In the absence of such
   consistent configuration, BFD with Large Packets may correctly
   determine unidirectional connectivity at the tested MTU, but bi-
   directional MTU may not be properly validated.

   It should be noted that some interfaces may intentionally have
   different MTUs.  Setting the bfd.PaddedPduSize appropriately for each
   side of the BFD session supports such scenarios.

4.4.  Detecting MTU Changes

   Once BFD sessions using Large Packets has reached the Up state,
   connectivity at the tested MTU(s) for the session is being validated.
   If the path MTU tested by the BFD with Large Packets session falls
   below the tested MTU, the BFD session will go Down.

   In the opposite circumstance where the path MTU increases, the BFD
   session will continue without being impacted.  BFD for Large Packets
   only ensures that the minimally acceptable MTU for the session can be
   used.

4.5.  Equal Cost Multiple Paths (ECMP) or other Load Balancing
      Considerations

   Various mechanisms are utilized to increase throughput between two
   endpoints at various network layers.  Such features include Link
   Aggregate Groups (LAGs) or ECMP forwarding.  Such mechanisms balance
   traffic across multiple physical links while hiding the details of
   that balancing from the higher networking layers.  The details of
   that balancing are highly implementation specific.

   In the presence of such load balancing mechanisms, it is possible to
   have member links that are not properly forwarding traffic.  In such
   circumstances, this will result in dropped traffic when traffic is
   chosen to be load balanced across those member links.

Haas & Fu                 Expires 19 July 2025                  [Page 5]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

   Such load balancing mechanisms may not permit all link members to be
   properly tested by BFD.  This is because the BFD Control packets may
   be forwarded only along links that are up.  BFD on LAG, [RFC7130],
   was developed to help cover one such scenario.  However, for testing
   forwarding over multiple hops, there is no such specified general
   purpose BFD mechanism for exercising all links in an ECMP.  This may
   result in a BFD session being in the Up state while some traffic may
   be dropped or otherwise negatively impacted along some component
   links.

   Some BFD implementations utilize their internal understanding of the
   component links and their resultant forwarding to exercise BFD in
   such a way to better test the ECMP members and to tie the BFD session
   state to the health of that ECMP.  Due to the implementation specific
   load balancing, it is not possible to standardize such additional
   mechanisms for BFD.

   Misconfiguration of some member MTUs may lead to Load Balancing that
   may have an inconsistent Path MTU depending on how the traffic is
   balanced.  While the intent of BFD with Large Packets is to verify
   path MTU, it is subject to the same considerations above.

   The above text also applies to most, if not all, BFD techniques.

4.6.  S-BFD

   This mechanism also can be applied to other forms of BFD, including
   S-BFD [RFC7880].

5.  BFD Encapsulated in Large Packets YANG Module

5.1.  Data Model Overview

   This YANG module augments the "ietf-bfd" module to add a flag
   'padding' to enable this feature.  The feature statement 'padding'
   needs to be enabled to indicate that BFD Encapsulated in Large Packet
   is supported by the implementation.

   Further, this YANG module augments the YANG modules for single-hop,
   multi-hop, LAG, and MPLS to add the "pdu-size" parameter to those
   session types to configure Large BFD packets.

   Finally, similar to the grouping "client-cfg-parms" defined in
   Section 2.1 of [RFC9314], this YANG module defines a grouping "bfd-
   large-common" that may be utilized by BFD clients using "client-cfg-
   params" to uniformly add support for the feature defined in this RFC.

Haas & Fu                 Expires 19 July 2025                  [Page 6]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

   module: ietf-bfd-large

     augment /rt:routing/rt:control-plane-protocols
               /rt:control-plane-protocol/bfd:bfd/bfd-ip-sh:ip-sh
               /bfd-ip-sh:sessions/bfd-ip-sh:session:
       +--rw pdu-size?   padded-pdu-size {padding}?
     augment /rt:routing/rt:control-plane-protocols
               /rt:control-plane-protocol/bfd:bfd/bfd-ip-mh:ip-mh
               /bfd-ip-mh:session-groups/bfd-ip-mh:session-group:
       +--rw pdu-size?   padded-pdu-size {padding}?
     augment /rt:routing/rt:control-plane-protocols
               /rt:control-plane-protocol/bfd:bfd/bfd-lag:lag
               /bfd-lag:sessions/bfd-lag:session:
       +--rw pdu-size?   padded-pdu-size {padding}?
     augment /rt:routing/rt:control-plane-protocols
               /rt:control-plane-protocol/bfd:bfd/bfd-mpls:mpls
               /bfd-mpls:session-groups/bfd-mpls:session-group:
       +--rw pdu-size?   padded-pdu-size {padding}?

                                  Figure 1

5.2.  YANG Module

   This YANG module imports A YANG Data Model for Routing [RFC8349], and
   YANG Data Model for Bidirectional Forwading Detection (BFD)
   [RFC9314].

   <CODE BEGINS> file "ietf-bfd-large@2025-01-15.yang"
   module ietf-bfd-large {
     yang-version 1.1;
     namespace "urn:ietf:params:xml:ns:yang:ietf-bfd-large";
     prefix "bfdl";

     import ietf-routing {
       prefix rt;
       reference
         "RFC 8349: A YANG Data Model for Routing Management
          (NMDA version)";
     }

     import ietf-bfd {
       prefix bfd;
       reference
         "RFC 9314: YANG Data Model for Bidirectional
          Forwarding Detection.";
     }

Haas & Fu                 Expires 19 July 2025                  [Page 7]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

     import ietf-bfd-ip-sh {
       prefix bfd-ip-sh;
       reference
         "RFC 9314: YANG Data Model for Bidirectional
          Forwarding Detection.";
     }

     import ietf-bfd-ip-mh {
       prefix bfd-ip-mh;
       reference
         "RFC 9314: YANG Data Model for Bidirectional
          Forwarding Detection.";
     }

     import ietf-bfd-lag {
       prefix bfd-lag;
       reference
         "RFC 9314: YANG Data Model for Bidirectional
          Forwarding Detection.";
     }

     import ietf-bfd-mpls {
       prefix bfd-mpls;
       reference
         "RFC 9314: YANG Data Model for Bidirectional
          Forwarding Detection.";
     }

     organization
       "IETF BFD Working Group";

     contact
       "WG Web:   <https://datatracker.ietf.org/wg/bfd>
        WG List:  <rtg-bfd@ietf.org>

        Authors: Jeffrey Haas (jhaas@juniper.net)
                 Albert Fu (afu14@bloomberg.net).";

     description
       "This YANG module augments the base BFD YANG module to add
        attributes related to support for BFD Encapsulated in Large
        Packets.  In particular, it adds a per-session parameter for the
        BFD Padded PDU Size.

        Copyright (c) 2024 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

Haas & Fu                 Expires 19 July 2025                  [Page 8]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject to
        the license terms contained in, the Revised BSD License set
        forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (https://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC XXXX
        (https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
        for full legal notices.

        The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
        NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED',
        'MAY', and 'OPTIONAL' in this document are to be interpreted as
        described in BCP 14 (RFC 2119) (RFC 8174) when, and only when,
        they appear in all capitals, as shown here.";

     revision "2025-01-15" {
       description
         "Initial Version.";
       reference
         "RFC XXXX, BFD Encapsulated in Large Packets.";
     }

     feature padding {
       description
         "If supported, the feature allows for BFD sessions to be
          configured with padded PDUs in support of BFD Encapsulated in
          Large Packets.";
     }

     typedef padded-pdu-size {
       type uint16 {
         range "24..65535";
       }
       units "bytes";
       description
         "The size of the padded and encapsulated BFD control packets
          to be transmitted at layer 3.  The BFD minimum control packet
          size is 24 or 26 octets; see Section 6.8.6 of RFC 5880.

          If the configured padded PDU size is smaller than the minimum
          sized packet of a given BFD session, then the minimum sized
          packet for the session will be used.

          The maximum padded PDU size may be limited by the supported
          interface MTU of the system.";
       reference

Haas & Fu                 Expires 19 July 2025                  [Page 9]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

         "RFC XXXX, BFD Encapsulated in Large Packets.";
     }

     grouping bfd-large-common {
       description
         "Common configuration and operational state for BFD
          Encapsulated in Large Packets.";
       reference
         "RFC XXXX, BFD Encapsulated in Large Packets.";
       leaf pdu-size {
         if-feature "padding";
         type padded-pdu-size;
         description
           "If set, this configures the padded PDU size for the
            Asynchronous mode BFD session. By default, no additional
            padding is added to such packets.";
       }
     }

     augment "/rt:routing/rt:control-plane-protocols/" +
             "rt:control-plane-protocol/bfd:bfd/bfd-ip-sh:ip-sh/" +
             "bfd-ip-sh:sessions/bfd-ip-sh:session" {
       uses bfd-large-common;
       description
         "Augment the 'bfd' container to add attributes related to BFD
          Encapsulated in Large Packets.";
     }

     augment "/rt:routing/rt:control-plane-protocols/" +
             "rt:control-plane-protocol/bfd:bfd/bfd-ip-mh:ip-mh/" +
             "bfd-ip-mh:session-groups/bfd-ip-mh:session-group" {
       uses bfd-large-common;
       description
         "Augment the 'bfd' container to add attributes related to BFD
          Encapsulated in Large Packets.";
     }

     augment "/rt:routing/rt:control-plane-protocols/" +
             "rt:control-plane-protocol/bfd:bfd/bfd-lag:lag/" +
             "bfd-lag:sessions/bfd-lag:session" {
       uses bfd-large-common;
       description
         "Augment the 'bfd' container to add attributes related to BFD
          Encapsulated in Large Packets.";
     }

     augment "/rt:routing/rt:control-plane-protocols/" +
             "rt:control-plane-protocol/bfd:bfd/bfd-mpls:mpls/" +

Haas & Fu                 Expires 19 July 2025                 [Page 10]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

       "bfd-mpls:session-groups/bfd-mpls:session-group" {
       uses bfd-large-common;
       description
         "Augment the 'bfd' container to add attributes related to BFD
          Encapsulated in Large Packets.";
     }
   }
   <CODE ENDS>

                                  Figure 2

6.  Security Considerations

   This document does not change the underlying security considerations
   of the BFD protocol or its encapsulations.

   On-path attackers that can selectively drop BFD packets, including
   those with large MTUs, can cause BFD sessions to go Down.

   The contents of the padding payload are set to zero.  This avoids
   implementation issues where the local uninitialized data may be
   leaked.

6.1.  YANG Security Considerations

   This section is modeled after the template described in Section 3.7
   of [I-D.ietf-netmod-rfc8407bis].

   The "ietf-bfd-large" YANG module defines a data model that is
   designed to be accessed via YANG-based management protocols, such as
   NETCONF [RFC6241] and RESTCONF [RFC8040].  These protocols have to
   use a secure transport layer (e.g., SSH [RFC4252], TLS [RFC8446], and
   QUIC [RFC9000]) and have to use mutual authentication.

   The Network Configuration Access Control Model (NACM) [RFC8341]
   provides the means to restrict access for particular NETCONF or
   RESTCONF users to a preconfigured subset of all available NETCONF or
   RESTCONF protocol operations and content.

   There is one data node defined in this YANG module that is
   writable/creatable/deletable (i.e., "config true", which is the
   default).  All writable data nodes are likely to be reasonably
   sensitive or vulnerable in some network environments.  Write
   operations (e.g., edit-config) and delete operations to these data
   nodes without proper protection or authentication can have a negative
   effect on network operations.  The data node has particular
   sensitivities/vulnerabilities:

Haas & Fu                 Expires 19 July 2025                 [Page 11]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

   *  'pdu-size' specifies the targeted size of BFD control packets
      encapsulated according to this proposal.  Changing this value for
      a session in the Up state may cause the session to go down,
      perhaps intentionally, if the session cannot accommodate such BFD
      control packets.  Operators should be mindful that multiple BFD
      clients may rely on the status of a given BFD session when
      changing this value.

   There are no particularly sensitive readable data nodes.

   There are no particularly sensitive RPC or action operations.

   Modules that use the groupings that are defined in this document
   should identify the corresponding security considerations.  This
   module defines one such grouping, "bfd-large-common", which contains
   the "pdu-size" data node whose security considerations are documented
   above.

7.  IANA Considerations

7.1.  The "IETF XML" Registry

   This document registers one URIs in the "ns" subregistry of the "IETF
   XML" registry [RFC3688].  Following the format in [RFC3688], the
   following registration is requested:

   URI: urn:ietf:params:xml:ns:yang:ietf-bfd-large
   Registrant Contact: The IESG
   XML: N/A, the requested URI is an XML namespace.

                                  Figure 3

7.2.  The "YANG Module Names" Registry

   This document registers one YANG modules in the "YANG Module Names"
   registry [RFC6020].  Following the format in [RFC6020], the following
   registrations are requested:

   name:         ietf-bfd-large
   namespace:    urn:ietf:params:xml:ns:yang:ietf-bfd-large
   prefix:       bfdl
   reference:    RFC XXXX

                                  Figure 4

Haas & Fu                 Expires 19 July 2025                 [Page 12]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

8.  Acknowledgments

   The authors would like to thank Les Ginsberg, Mahesh Jethanandani,
   Robert Raszuk, and Ketan Talaulikar, for their valuable feedback on
   this proposal.

9.  Normative References

   [RFC0791]  Postel, J., "Internet Protocol", STD 5, RFC 791,
              DOI 10.17487/RFC0791, September 1981,
              <https://www.rfc-editor.org/info/rfc791>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC5880]  Katz, D. and D. Ward, "Bidirectional Forwarding Detection
              (BFD)", RFC 5880, DOI 10.17487/RFC5880, June 2010,
              <https://www.rfc-editor.org/info/rfc5880>.

   [RFC5881]  Katz, D. and D. Ward, "Bidirectional Forwarding Detection
              (BFD) for IPv4 and IPv6 (Single Hop)", RFC 5881,
              DOI 10.17487/RFC5881, June 2010,
              <https://www.rfc-editor.org/info/rfc5881>.

   [RFC5883]  Katz, D. and D. Ward, "Bidirectional Forwarding Detection
              (BFD) for Multihop Paths", RFC 5883, DOI 10.17487/RFC5883,
              June 2010, <https://www.rfc-editor.org/info/rfc5883>.

   [RFC6020]  Bjorklund, M., Ed., "YANG - A Data Modeling Language for
              the Network Configuration Protocol (NETCONF)", RFC 6020,
              DOI 10.17487/RFC6020, October 2010,
              <https://www.rfc-editor.org/info/rfc6020>.

   [RFC7130]  Bhatia, M., Ed., Chen, M., Ed., Boutros, S., Ed.,
              Binderberger, M., Ed., and J. Haas, Ed., "Bidirectional
              Forwarding Detection (BFD) on Link Aggregation Group (LAG)
              Interfaces", RFC 7130, DOI 10.17487/RFC7130, February
              2014, <https://www.rfc-editor.org/info/rfc7130>.

Haas & Fu                 Expires 19 July 2025                 [Page 13]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

   [RFC7880]  Pignataro, C., Ward, D., Akiya, N., Bhatia, M., and S.
              Pallagatti, "Seamless Bidirectional Forwarding Detection
              (S-BFD)", RFC 7880, DOI 10.17487/RFC7880, July 2016,
              <https://www.rfc-editor.org/info/rfc7880>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8341]  Bierman, A. and M. Bjorklund, "Network Configuration
              Access Control Model", STD 91, RFC 8341,
              DOI 10.17487/RFC8341, March 2018,
              <https://www.rfc-editor.org/info/rfc8341>.

   [RFC8349]  Lhotka, L., Lindem, A., and Y. Qu, "A YANG Data Model for
              Routing Management (NMDA Version)", RFC 8349,
              DOI 10.17487/RFC8349, March 2018,
              <https://www.rfc-editor.org/info/rfc8349>.

   [RFC9314]  Jethanandani, M., Ed., Rahman, R., Ed., Zheng, L., Ed.,
              Pallagatti, S., and G. Mirsky, "YANG Data Model for
              Bidirectional Forwarding Detection (BFD)", RFC 9314,
              DOI 10.17487/RFC9314, September 2022,
              <https://www.rfc-editor.org/info/rfc9314>.

10.  Informative References

   [I-D.haas-xiao-bfd-echo-path-mtu]
              Min, X. and J. Haas, "Application of the BFD Echo function
              for Path MTU Verification or Detection", Work in Progress,
              Internet-Draft, draft-haas-xiao-bfd-echo-path-mtu-01, 11
              July 2011, <https://datatracker.ietf.org/doc/html/draft-
              haas-xiao-bfd-echo-path-mtu-01>.

   [I-D.ietf-netmod-rfc8407bis]
              Bierman, A., Boucadair, M., and Q. Wu, "Guidelines for
              Authors and Reviewers of Documents Containing YANG Data
              Models", Work in Progress, Internet-Draft, draft-ietf-
              netmod-rfc8407bis-22, 14 January 2025,
              <https://datatracker.ietf.org/doc/html/draft-ietf-netmod-
              rfc8407bis-22>.

   [RFC1191]  Mogul, J. and S. Deering, "Path MTU discovery", RFC 1191,
              DOI 10.17487/RFC1191, November 1990,
              <https://www.rfc-editor.org/info/rfc1191>.

Haas & Fu                 Expires 19 July 2025                 [Page 14]
Internet-Draft      BFD Encapsulated in Large Packets       January 2025

   [RFC4252]  Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
              Authentication Protocol", RFC 4252, DOI 10.17487/RFC4252,
              January 2006, <https://www.rfc-editor.org/info/rfc4252>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/info/rfc6241>.

   [RFC8040]  Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <https://www.rfc-editor.org/info/rfc8040>.

   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.

   [RFC9000]  Iyengar, J., Ed. and M. Thomson, Ed., "QUIC: A UDP-Based
              Multiplexed and Secure Transport", RFC 9000,
              DOI 10.17487/RFC9000, May 2021,
              <https://www.rfc-editor.org/info/rfc9000>.

Authors' Addresses

   Jeffrey Haas
   Juniper Networks, Inc.
   1133 Innovation Way
   Sunnyvale, CA 94089
   United States of America
   Email: jhaas@juniper.net

   Albert Fu
   Bloomberg L.P.
   731 Lexington Avenue
   New York, NY 10022
   United States of America
   Email: afu14@bloomberg.net

Haas & Fu                 Expires 19 July 2025                 [Page 15]