Skip to main content

JMAP for Sieve Scripts
draft-ietf-jmap-sieve-15

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 9661.
Author Kenneth Murchison
Last updated 2023-10-23 (Latest revision 2023-03-30)
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state In WG Last Call
Associated WG milestone
Dec 2023
Submit Sieve document to the IESG
Document shepherd Bron Gondwana
Shepherd write-up Show Last changed 2022-10-24
IESG IESG state Became RFC 9661 (Proposed Standard)
Consensus boilerplate Yes
Telechat date (None)
Responsible AD (None)
Send notices to brong@fastmailteam.com
draft-ietf-jmap-sieve-15
JMAP                                                        K. Murchison
Internet-Draft                                                  Fastmail
Intended status: Standards Track                         23 October 2023
Expires: 25 April 2024

                         JMAP for Sieve Scripts
                        draft-ietf-jmap-sieve-15

Abstract

   This document specifies a data model for managing Sieve scripts on a
   server using the JSON Meta Application Protocol (JMAP).

Open Issues

   *  Should ALL Sieve capabilites be in the JMAP Session capabilities
      property rather than in the accountCapabilities property?  Would
      the capabilities actually differ between users?

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 25 April 2024.

Copyright Notice

   Copyright (c) 2023 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

Murchison                 Expires 25 April 2024                 [Page 1]
Internet-Draft                 JMAP Sieve                   October 2023

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Notational Conventions  . . . . . . . . . . . . . . . . .   3
     1.2.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   3
     1.3.  Addition to the Capabilities Object . . . . . . . . . . .   3
       1.3.1.  urn:ietf:params:jmap:sieve  . . . . . . . . . . . . .   4
   2.  Sieve Scripts . . . . . . . . . . . . . . . . . . . . . . . .   5
     2.1.  SieveScript/get . . . . . . . . . . . . . . . . . . . . .   6
       2.1.1.  Examples  . . . . . . . . . . . . . . . . . . . . . .   6
     2.2.  SieveScript/set . . . . . . . . . . . . . . . . . . . . .   9
       2.2.1.  Examples  . . . . . . . . . . . . . . . . . . . . . .  11
     2.3.  SieveScript/query . . . . . . . . . . . . . . . . . . . .  19
     2.4.  SieveScript/validate  . . . . . . . . . . . . . . . . . .  19
   3.  Compatibility with JMAP Vacation Response . . . . . . . . . .  20
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .  20
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  20
     5.1.  JMAP Capability Registration for "sieve"  . . . . . . . .  20
     5.2.  JMAP Error Codes Registry . . . . . . . . . . . . . . . .  21
       5.2.1.  invalidScript . . . . . . . . . . . . . . . . . . . .  21
       5.2.2.  scriptIsActive  . . . . . . . . . . . . . . . . . . .  21
   6.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .  21
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  21
     7.1.  Normative References  . . . . . . . . . . . . . . . . . .  21
     7.2.  Informative References  . . . . . . . . . . . . . . . . .  22
   Appendix A.  Change History (To be removed by RFC Editor before
           publication)  . . . . . . . . . . . . . . . . . . . . . .  23
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  26

1.  Introduction

   JMAP [RFC8620] (JSON Meta Application Protocol) is a generic protocol
   for synchronizing data, such as mail, calendars or contacts, between
   a client and a server.  It is optimized for mobile and web
   environments, and aims to provide a consistent interface to different
   data types.

Murchison                 Expires 25 April 2024                 [Page 2]
Internet-Draft                 JMAP Sieve                   October 2023

   This specification defines a data model for managing Sieve [RFC5228]
   scripts on a server using JMAP.  The data model is designed to allow
   a server to provide consistent access to the same scripts via
   ManageSieve [RFC5804] as well as JMAP, however the functionality
   offered over the two protocols may differ.

1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   Type signatures, examples, and property descriptions in this document
   follow the conventions established in Section 1.1 of [RFC8620].  Data
   types defined in the core specification are also used in this
   document.

   Servers MUST support all properties specified for the new data type
   defined in this document.

   For compatibility with publishing requirements, line breaks have been
   inserted inside long JSON strings, with the following continuation
   lines indented.  To form the valid JSON example, any line breaks
   inside a string must be replaced with a space and any other white
   space after the line break removed.

1.2.  Terminology

   The same terminology is used in this document as in the core JMAP
   specification, see [RFC8620], Section 1.6.

   The term SieveScript (with this specific capitalization) is used to
   refer to the data type defined in this document and instances of
   those data types.

1.3.  Addition to the Capabilities Object

   The capabilities object is returned as part of the JMAP Session
   object; see [RFC8620], Section 2.  This document defines one
   additional capability URI.

Murchison                 Expires 25 April 2024                 [Page 3]
Internet-Draft                 JMAP Sieve                   October 2023

1.3.1.  urn:ietf:params:jmap:sieve

   This represents support for the SieveScript data type and associated
   API methods.  The value of this property in the JMAP Session
   capabilities property is an object that MUST contain the following
   information on server capabilities:

   *  *implementation*: String

      The name and version of the Sieve implementation.

   The value of this property in an account's accountCapabilities
   property is an object that MUST contain the following information on
   server capabilities:

   *  *maxSizeScriptName*: UnsignedInt

      The maximum length, in (UTF-8) octets, allowed for the name of a
      SieveScript.  For compatibility with ManageSieve, this MUST be at
      least 512 (up to 128 Unicode characters).

   *  *maxSizeScript*: UnsignedInt|null

      The maximum size (in octets) of a Sieve script the server is
      willing to store for the user, or null for no limit.

   *  *maxNumberScripts*: UnsignedInt|null

      The maximum number of Sieve scripts the server is willing to store
      for the user, or null for no limit.

   *  *maxNumberRedirects*: UnsignedInt|null

      The maximum number of Sieve "redirect" actions a script can
      perform during a single evaluation or null for no limit.  Note
      that this is different from the total number of "redirect" actions
      a script can contain.

   *  *sieveExtensions*: String[]

      A list of case-sensitive Sieve capability strings (as listed in
      Sieve "require" action; see [RFC5228], Section 3.2) indicating the
      extensions supported by the Sieve engine.

   *  *notificationMethods*: String[]|null

Murchison                 Expires 25 April 2024                 [Page 4]
Internet-Draft                 JMAP Sieve                   October 2023

      A list of URI schema parts [RFC3986] for notification methods
      supported by the Sieve "enotify" [RFC5435] extension, or null if
      the extension is not supported by the Sieve engine.

   *  *externalLists*: String[]|null

      A list of URI schema parts [RFC3986] for externally stored list
      types supported by the Sieve "extlists" [RFC6134] extension, or
      null if the extension is not supported by the Sieve engine.

2.  Sieve Scripts

   A *SieveScript* object represents a single Sieve [RFC5228] script for
   filtering email messages at time of final delivery.

   A *SieveScript* object has the following properties:

   *  *id*: Id (immutable; server-set)

      The id of the script.

   *  *name*: String|null (optional; default is server-dependent)

      User-visible name for the SieveScript.  If non-null, this MUST be
      a Net-Unicode [RFC5198] string of at least 1 character in length,
      subject to the maximum size given in the capability object.  For
      compatibility with ManageSieve, servers MUST reject names that
      contain control characters.  Servers MAY reject names that violate
      server policy (e.g., names containing slash (/)).  The name MUST
      be unique among all SieveScripts within an account.

   *  *blobId*: Id

      The id of the blob containing the raw octets of the script.

      The script MUST be UTF-8 [RFC3629] content of at least 1 character
      in length, subject to the syntax of Sieve [RFC5228].  The script
      MUST NOT contain any "require" statement(s) mentioning Sieve
      capability strings not present in the capability (Section 1.3.1)
      object.  Note that if the Sieve "ihave" [RFC5463] capability
      string is present in the capability object, the script MAY mention
      unrecognized/unsupported extensions in the "ihave" test.

   *  *isActive*: Boolean (server-set; default: false)

Murchison                 Expires 25 April 2024                 [Page 5]
Internet-Draft                 JMAP Sieve                   October 2023

      A user may have multiple SieveScripts on the server, yet only one
      script may be used for filtering of incoming messages.  This is
      the active script.  Users may have zero or one active script.  The
      SieveScript/set (Section 2.2) method is used for changing the
      active script or disabling Sieve processing.

2.1.  SieveScript/get

   This is a standard "/get" method as described in [RFC8620],
   Section 5.1.  The _ids_ argument may be null to fetch all at once.

   This method provides similar functionality to the GETSCRIPT and
   LISTSCRIPTS commands in [RFC5804].

2.1.1.  Examples

   Request (and response) to list all scripts:

Murchison                 Expires 25 April 2024                 [Page 6]
Internet-Draft                 JMAP Sieve                   October 2023

   {
     "using": [ "urn:ietf:params:jmap:core",
                "urn:ietf:params:jmap:sieve" ],
     "methodCalls": [
       ["SieveScript/get", {
         "accountId": "ken"
       }, "0"]
     ]
   }

   {
     "methodResponses": [
       [
         "SieveScript/get",
         {
           "state": "1634915373.240633104-120",
           "list": [
             {
               "id": "2d647053-dded-418d-917a-63eda3ac8f7b",
               "name": "test1",
               "isActive": true,
               "blobId": "S123"
             }
           ],
           "notFound": [],
           "accountId": "ken"
         },
         "0"
       ]
     ]
   }

   Request (and response) to download the script (assuming that the JMAP
   Download URL has been advertised in the JMAP Session object as having
   a path of "/jmap/
   download/{accountId}/{blobId}/{name}?accept={type}").  Note that the
   request-line has been wrapped for presentation purposes only.

Murchison                 Expires 25 April 2024                 [Page 7]
Internet-Draft                 JMAP Sieve                   October 2023

   GET
    /jmap/download/ken/S123/test1.siv?accept=application/sieve
    HTTP/1.1
   Host: jmap.example.com
   Authorization: Basic a2VuOnBhc3N3b3Jk

   HTTP/1.1 200 OK
   Date: Fri, 22 Oct 2021 15:27:38 GMT
   Content-Type: application/sieve; charset=utf-8
   Content-Disposition: attachment; filename="test1.siv"
   Content-Length: 49

   require ["fileinto"];
   fileinto "INBOX.target";

   Request (and response) to fetch the content of a single script:

   {
     "using": [ "urn:ietf:params:jmap:core",
                "urn:ietf:params:jmap:blob",
                "urn:ietf:params:jmap:sieve" ],
     "methodCalls": [
       ["SieveScript/get", {
         "accountId": "ken",
         "ids": [ "2d647053-dded-418d-917a-63eda3ac8f7b" ]
       }, "0"],
       ["Blob/get", {
         "accountId": "ken",
         "#ids": {
           "resultOf": "0",
           "name": "SieveScript/get",
           "path": "/list/*/blobId"
         }
       }, "1"]
     ]
   }

   {
     "methodResponses": [
       [
         "SieveScript/get",
         {
           "state": "1634915373.240633104-120",
           "list": [
             {
               "id": "2d647053-dded-418d-917a-63eda3ac8f7b",
               "name": "test1",
               "isActive": true,

Murchison                 Expires 25 April 2024                 [Page 8]
Internet-Draft                 JMAP Sieve                   October 2023

               "blobId": "S123"
             }
           ],
           "notFound": [],
           "accountId": "ken"
         },
         "0"
       ],
       [
         "Blob/get",
         {
           "list": [
             {
               "id": "S123",
              "data:asText":
    "require [\"fileinto\"];\\r\\nfileinto \"INBOX.target\";\\r\\n",
               "size": 49
             }
           ],
           "notFound": [],
           "accountId": "ken"
         },
         "1"
       ]
     ]
   }

2.2.  SieveScript/set

   This is a standard "/set" method as described in [RFC8620],
   Section 5.3 but with the following additional request arguments,
   either or both of which may be omitted:

   *  *onSuccessActivateScript*: Id (optional)

      The id of the SieveScript to activate if and only if all of the
      creations, modifications, and destructions (if any) succeed.  (For
      references to SieveScript creations, this is equivalent to a
      creation-reference, so the id will be the creation id prefixed
      with a "#".)  The currently active SieveScript (if any) will be
      deactivated before activating the specified SieveScript.

      If the id is either illegal or nonexistent, it MUST be ignored and
      the currently active SieveScript (if any) will remain as such.

      The id of any activated SieveScript MUST be reported in either the
      "created" or "updated" argument in the response as appropriate,
      including a value of "true" for the "isActive" property.  The id

Murchison                 Expires 25 April 2024                 [Page 9]
Internet-Draft                 JMAP Sieve                   October 2023

      of any deactivated SieveScript MUST be reported in the "updated"
      argument in the response, including a value of "false" for the
      "isActive" property.

   *  *onSuccessDeactivateScript*: Boolean (optional)

      If true, the currently active SieveScript (if any) will be
      deactivated if and only if all of the creations, modifications,
      and destructions (if any) succeed.  If false, the currently active
      SieveScript (if any) will remain as such.

      The id of any deactivated SieveScript MUST be reported in the
      "updated" argument in the response, including a value of "false"
      for the "isActive" property.

   If both the *onSuccessActivateScript* and *onSuccessDeactivateScript*
   arguments are present in the request, then
   *onSuccessDeactivateScript* MUST be processed first.  If neither
   argument is present in the request, the currently active SieveScript
   (if any) will remain as such.

   This method provides similar functionality to the PUTSCRIPT,
   DELETESCRIPT, RENAMESCRIPT, and SETACTIVE commands in [RFC5804].

   Script content must first be uploaded as a blob using either the
   standard upload mechanism (see [RFC8620] Section 6.1) or the JMAP
   Blob management extension (see [RFC9404] Section 4.1).

   If the SieveScript can not be created or updated because it would
   result in two SieveScripts with the same name, the server MUST reject
   the request with an "alreadyExists" SetError.  An "existingId"
   property of type "Id" MUST be included on the SetError object with
   the id of the existing SieveScript.

   If the SieveScript can not be created or updated because its size
   exceeds the "maxSizeScript" limit, the server MUST reject the request
   with a "tooLarge" SetError.

   If the Sieve Script can not be created because it would exceed the
   "maxNumberScripts" limit, the server MUST reject the request with an
   "overQuota" SetError.

   The active SieveScript MUST NOT be destroyed unless it is first
   deactivated in a separate SieveScript/set method call.

   The following extra SetError types are defined:

   For "create" and "update":

Murchison                 Expires 25 April 2024                [Page 10]
Internet-Draft                 JMAP Sieve                   October 2023

   *  *invalidScript*:

      The SieveScript content violates the Sieve [RFC5228] grammar and/
      or one or more extensions mentioned in the script's "require"
      statement(s) are not supported by the Sieve interpreter.  The
      _description_ property on the SetError object SHOULD contain a
      specific error message giving at least the line number of the
      first error.

   For "destroy":

   *  *scriptIsActive*:

      The SieveScript is active.

2.2.1.  Examples

   Request (and response) to upload a script requiring the Imap4Flags
   [RFC5232] Extension (assuming that the JMAP Upload URL has been
   advertised in the JMAP Session object as having a path of "/jmap/
   upload/{accountId}/"):

   POST /jmap/upload/ken/ HTTP/1.1
   Host: jmap.example.com
   Authorization: Basic a2VuOnBhc3N3b3Jk
   Content-Type: application/sieve
   Content-Length: 98

   require "imapflags";

   if address :is ["To", "Cc"] "jmap@ietf.org" {
     setflag "\\Flagged";
   }

   HTTP/1.1 201 Created
   Date: Thu, 10 Dec 2020 17:14:31 GMT
   Content-Type: application/json; charset=utf-8
   Content-Length: 171

   {
     "accountId": "ken",
     "blobId": "Gabcc83e44a6e19991c4568d0b94e1767c83dd123",
     "type": "application/sieve"
     "size": 98
   }

Murchison                 Expires 25 April 2024                [Page 11]
Internet-Draft                 JMAP Sieve                   October 2023

   Request (and response) to create and activate a script using the
   uploaded blob.  Note that the response shows that an existing active
   script has been deactivated in lieu of the newly created script being
   activated.

Murchison                 Expires 25 April 2024                [Page 12]
Internet-Draft                 JMAP Sieve                   October 2023

   {
     "using": [ "urn:ietf:params:jmap:core",
                "urn:ietf:params:jmap:sieve" ],
     "methodCalls": [
       ["SieveScript/set", {
         "accountId": "ken",
         "create": {
           "A": {
             "name": null,
             "blobId": "Gabcc83e44a6e19991c4568d0b94e1767c83dd123"
           }
         },
         "onSuccessActivateScript": "#A"
       }, "0"]
     ]
   }

   {
     "methodResponses": [
       [
         "SieveScript/set",
         {
           "oldState": "1603741717.50737918-4096",
           "newState": "1603741751.227268529-4096",
           "created": {
             "A": {
               "id": "dd1b164f-8cdc-448c-9f54",
               "name": "ken-20201210T171432-0",
               "blobId": "Sdd1b164f-8cdc-448c-9f54",
               "isActive": true
             }
           },
           "updated": {
             "8abd6f4a-bcb4d-87650-3fcd": {
               "isActive": false
             }
           },
           "destroyed": null,
           "notCreated": null,
           "notUpdated": null,
           "notDestroyed": null,
           "accountId": "ken"
         },
         "0"
       ]
     ]
   }

Murchison                 Expires 25 April 2024                [Page 13]
Internet-Draft                 JMAP Sieve                   October 2023

   Request (and response) to update script content using the JMAP Blob
   management extension [RFC9404]:

   {
     "using": [ "urn:ietf:params:jmap:core",
                "urn:ietf:params:jmap:blob",
                "urn:ietf:params:jmap:sieve" ],
     "methodCalls": [
       ["Blob/upload", {
         "accountId": "ken",
         "create": {
           "B": {
             "data": [ {
               "data:asText":
                 "redirect \"ken@example.com\"\r\n;"
              } ],
             "type": "application/sieve"
           }
         }
       }, "1"],
       ["SieveScript/set", {
         "accountId": "ken",
         "update": { "dd1b164f-8cdc-448c-9f54": {
           "blobId": "#B"
           }
         }
       }, "2"]
     ]
   }

   {
     "methodResponses": [
       [
         "Blob/upload",
         {
           "oldState": null,
           "newState": "1603741700.309607123-0128",
           "created": {
             "B": {
               "id": "G969c83e44a6e10871c4568d0b94e1767c83ddeae",
               "blobId": "G969c83e44a6e10871c4568d0b94e1767c83ddeae",
               "type": "application/sieve",
               "size": 29
             }
           },
           "notCreated": null,
           "accountId": "ken"
         },

Murchison                 Expires 25 April 2024                [Page 14]
Internet-Draft                 JMAP Sieve                   October 2023

         "1"
       ],
       [
         "SieveScript/set",
         {
           "oldState": "1603741751.227268529-4096",
           "newState": "1603742603.309607868-4096",
           "created": null,
           "updated": {
             "dd1b164f-8cdc-448c-9f54": null
           },
           "destroyed": null,
           "notCreated": null,
           "notUpdated": null,
           "notDestroyed": null,
           "accountId": "ken"
         },
         "2"
       ]
     ]
   }

   Request (and response) to update script name and deactivate:

Murchison                 Expires 25 April 2024                [Page 15]
Internet-Draft                 JMAP Sieve                   October 2023

   {
     "using": [ "urn:ietf:params:jmap:core",
                "urn:ietf:params:jmap:sieve" ],
     "methodCalls": [
       ["SieveScript/set", {
         "accountId": "ken",
         "update": { "dd1b164f-8cdc-448c-9f54": {
           "name": "myscript"
           }
         },
         "onSuccessDeactivateScript": true
       }, "3"]
     ]
   }

   {
     "methodResponses": [
       [
         "SieveScript/set",
         {
           "oldState": "1603742603.309607868-4096",
           "newState": "1603742967.852315428-4096",
           "created": null,
           "updated": {
             "dd1b164f-8cdc-448c-9f54": {
               "isActive": false
             }
           },
           "destroyed": null,
           "notCreated": null,
           "notUpdated": null,
           "notDestroyed": null,
           "accountId": "ken"
         },
         "3"
       ]
     ]
   }

   Request (and response) to activate a script:

Murchison                 Expires 25 April 2024                [Page 16]
Internet-Draft                 JMAP Sieve                   October 2023

   {
     "using": [ "urn:ietf:params:jmap:core",
                "urn:ietf:params:jmap:sieve" ],
     "methodCalls": [
       ["SieveScript/set", {
         "accountId": "ken",
         "onSuccessActivateScript": "dd1b164f-8cdc-448c-9f54"
       }, "4"]
     ]
   }

   {
     "methodResponses": [
       [
         "SieveScript/set",
         {
           "oldState": "1603742967.852315428-4096",
           "newState": "1603744460.316617118-4096",
           "created": null,
           "updated": {
             "dd1b164f-8cdc-448c-9f54": {
               "isActive": true
             }
           },
           "destroyed": null,
           "notCreated": null,
           "notUpdated": null,
           "notDestroyed": null,
           "accountId": "ken"
         },
         "4"
       ]
     ]
   }

   Requests (and responses) to deactivate and destroy the active script:

   {
     "using": [ "urn:ietf:params:jmap:core",
                "urn:ietf:params:jmap:sieve" ],
     "methodCalls": [
       ["SieveScript/set", {
         "accountId": "ken",
         "onSuccessDeactivateScript": true
       }, "5"],
       ["SieveScript/set", {
         "accountId": "ken",
         "destroy": [ "dd1b164f-8cdc-448c-9f54" ]

Murchison                 Expires 25 April 2024                [Page 17]
Internet-Draft                 JMAP Sieve                   October 2023

       }, "6"]
     ]
   }

   {
     "methodResponses": [
       [
         "SieveScript/set",
         {
           "oldState": "1603744460.316617118-4096",
           "newState": "1603744637.575375572-4096",
           "created": null,
           "updated": {
             "dd1b164f-8cdc-448c-9f54": {
               "isActive": false
             }
           },
           "destroyed": null,
           "notCreated": null,
           "notUpdated": null,
           "notDestroyed": null,
           "accountId": "ken"
         },
         "5"
       ],
       [
         "SieveScript/set",
         {
           "oldState": "1603744637.575375572-4096",
           "newState": "1603744637.854390875-4096",
           "created": null,
           "updated": null,
           "destroyed": [
             "dd1b164f-8cdc-448c-9f54"
           ],
           "notCreated": null,
           "notUpdated": null,
           "notDestroyed": null,
           "accountId": "ken"
         },
         "6"
       ]
     ]
   }

Murchison                 Expires 25 April 2024                [Page 18]
Internet-Draft                 JMAP Sieve                   October 2023

2.3.  SieveScript/query

   This is a standard "/query" method as described in [RFC8620],
   Section 5.5.  A _FilterCondition_ object has the following
   properties, either of which may be omitted:

   *  *name*: String

      The SieveScript "name" property contains the given string.

   *  *isActive*: Boolean

      The "isActive" property of the SieveScript must be identical to
      the value given to match the condition.

   The following SieveScript properties MUST be supported for sorting:

   *  *name*

   *  *isActive*

2.4.  SieveScript/validate

   This method is used by the client to verify Sieve script validity
   without storing the script on the server, providing similar
   functionality to the CHECKSCRIPT command in [RFC5804].

   The method takes the following arguments:

   *  *accountId*: Id

      The id of the account to use.

   *  *blobId*: Id

      The id of the blob containing the raw octets of the script to
      validate, subject to the same requirements in Section 2.

   The response has the following arguments:

   *  *accountId*: Id

      The id of the account used for this call.

   *  *error*: SetError|null

      A "invalidScript" SetError object if the script content is invalid
      (see Section 2.2), or null if the script content is valid.

Murchison                 Expires 25 April 2024                [Page 19]
Internet-Draft                 JMAP Sieve                   October 2023

   As with the SieveScript/set (Section 2.2) method, script content must
   first be uploaded as a blob using either the standard upload
   mechanism (see [RFC8620] Section 6.1) or the JMAP Blob management
   extension (see [RFC9404] Section 4.1).

3.  Compatibility with JMAP Vacation Response

   Section 8 of [RFC8621] defines a VacationResponse object to represent
   an autoresponder to incoming email messages.  Servers that implement
   the VacationResponse as a Sieve script that resides amongst other
   user scripts are subject to the following requirements:

   *  MUST allow the VacationResponse Sieve script to be fetched by the
      SieveScript/get (Section 2.1) method.

   *  MUST allow the VacationResponse Sieve script to be [de]activated
      via the "onSuccessActivateScript" argument to the SieveScript/set
      (Section 2.2) method.

   *  MUST NOT allow the VacationResponse Sieve script to be destroyed
      or have its content updated by the SieveScript/set (Section 2.2)
      method.  Any such request MUST be rejected with a "forbidden"
      SetError.  A "description" property MAY be present with an
      explanation that the script can only be modified by a
      VacationResponse/set method.

4.  Security Considerations

   All security considerations of JMAP [RFC8620] and Sieve [RFC5228]
   apply to this specification.

5.  IANA Considerations

5.1.  JMAP Capability Registration for "sieve"

   IANA will register the "sieve" JMAP Capability as follows:

   Capability Name: urn:ietf:params:jmap:sieve

   Specification document: this document

   Intended use: common

   Change Controller: IETF

   Security and privacy considerations: this document, Section 4

Murchison                 Expires 25 April 2024                [Page 20]
Internet-Draft                 JMAP Sieve                   October 2023

5.2.  JMAP Error Codes Registry

   The following sub-sections register two new error codes in the JMAP
   Error Codes registry, as defined in [RFC8620].

5.2.1.  invalidScript

   JMAP Error Code: invalidScript

   Intended use: common

   Change controller: IETF

   Reference: This document, Section 2.2

   Description: The SieveScript violates the Sieve grammar [RFC5228]
   and/or one or more extensions mentioned in the script's "require"
   statement(s) are not supported by the Sieve interpreter.

5.2.2.  scriptIsActive

   JMAP Error Code: scriptIsActive

   Intended use: common

   Change controller: IETF

   Reference: This document, Section 2.2

   Description: The client tried to destroy the active SieveScript.

6.  Acknowledgments

   The concepts in this document are based largely on those in
   [RFC5804].  The author would like to thank the authors of that
   document for providing both inspiration and some borrowed text for
   this document.

   The author would also like to thank the following individuals for
   contributing their ideas and support for writing this specification:
   Bron Gondwana, Neil Jenkins, Alexey Melnikov, and Ricardo Signes.

7.  References

7.1.  Normative References

Murchison                 Expires 25 April 2024                [Page 21]
Internet-Draft                 JMAP Sieve                   October 2023

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
              2003, <https://www.rfc-editor.org/info/rfc3629>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, DOI 10.17487/RFC3986, January 2005,
              <https://www.rfc-editor.org/info/rfc3986>.

   [RFC5198]  Klensin, J. and M. Padlipsky, "Unicode Format for Network
              Interchange", RFC 5198, DOI 10.17487/RFC5198, March 2008,
              <https://www.rfc-editor.org/info/rfc5198>.

   [RFC5228]  Guenther, P., Ed. and T. Showalter, Ed., "Sieve: An Email
              Filtering Language", RFC 5228, DOI 10.17487/RFC5228,
              January 2008, <https://www.rfc-editor.org/info/rfc5228>.

   [RFC5435]  Melnikov, A., Ed., Leiba, B., Ed., Segmuller, W., and T.
              Martin, "Sieve Email Filtering: Extension for
              Notifications", RFC 5435, DOI 10.17487/RFC5435, January
              2009, <https://www.rfc-editor.org/info/rfc5435>.

   [RFC6134]  Melnikov, A. and B. Leiba, "Sieve Extension: Externally
              Stored Lists", RFC 6134, DOI 10.17487/RFC6134, July 2011,
              <https://www.rfc-editor.org/info/rfc6134>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8620]  Jenkins, N. and C. Newman, "The JSON Meta Application
              Protocol (JMAP)", RFC 8620, DOI 10.17487/RFC8620, July
              2019, <https://www.rfc-editor.org/info/rfc8620>.

   [RFC8621]  Jenkins, N. and C. Newman, "The JSON Meta Application
              Protocol (JMAP) for Mail", RFC 8621, DOI 10.17487/RFC8621,
              August 2019, <https://www.rfc-editor.org/info/rfc8621>.

7.2.  Informative References

   [RFC5232]  Melnikov, A., "Sieve Email Filtering: Imap4flags
              Extension", RFC 5232, DOI 10.17487/RFC5232, January 2008,
              <https://www.rfc-editor.org/info/rfc5232>.

Murchison                 Expires 25 April 2024                [Page 22]
Internet-Draft                 JMAP Sieve                   October 2023

   [RFC5463]  Freed, N., "Sieve Email Filtering: Ihave Extension",
              RFC 5463, DOI 10.17487/RFC5463, March 2009,
              <https://www.rfc-editor.org/info/rfc5463>.

   [RFC5804]  Melnikov, A., Ed. and T. Martin, "A Protocol for Remotely
              Managing Sieve Scripts", RFC 5804, DOI 10.17487/RFC5804,
              July 2010, <https://www.rfc-editor.org/info/rfc5804>.

   [RFC9404]  Gondwana, B., Ed., "JSON Meta Application Protocol (JMAP)
              Blob Management Extension", RFC 9404,
              DOI 10.17487/RFC9404, August 2023,
              <https://www.rfc-editor.org/info/rfc9404>.

Appendix A.  Change History (To be removed by RFC Editor before
             publication)

   Changes since ietf-14:

   *  Updated reference for JMAP Blobs.

   Changes since ietf-13:

   *  Added implementation argument to capabilities.

   *  Miscellaneous editorial changes.

   Changes since ietf-12:

   *  Added onSuccessDeactivateScipt argument to /set method.

   *  Clarified that the "isActive" property must be included in the
      created/uodated/destroyed arguments in a response of the active
      script is changed and/or deactivated.

   *  Miscellaneous editorial changes.

   Changes since ietf-11:

   *  Fixed examples to be proper JSON and JMAP.

   Changes since ietf-10:

   *  Fixed SieveScript/set response deactivating script example.

   *  Fixed line line nit in Blob/get request.

   *  Removed unused references.

Murchison                 Expires 25 April 2024                [Page 23]
Internet-Draft                 JMAP Sieve                   October 2023

   Changes since ietf-09:

   *  Fixed Blob/upload request in example.

   Changes since ietf-08:

   *  Fixed Blob/upload response in example.

   *  Removed SieveScript/test method (to be written as an extension
      document).

   Changes since ietf-07:

   *  Updated example to use Blob/upload rather than Blob/set.

   Changes since ietf-06:

   *  None (refreshed to avoid expiration).

   Changes since ietf-05:

   *  Converted source from xml2rfc v2 to v3.

   *  Added examples for SieveScript/get.

   *  Miscellaneous editorial changes.

   Changes since ietf-04:

   *  SieveScript/test: Switched from using a JSON array for each
      completed action and its args to a JSON object.

   *  Switched to referencing draft-ietf-jmap-blob.

   *  Miscellaneous editorial changes.

   Changes since ietf-03:

   *  SieveScript/test: Moved positional arguments into their own array
      (because the specfications don't use a consistent method for
      defining the action syntax or naming of positional arguments).

   Changes since ietf-02:

   *  Removed open issues.

   *  Reverted back to using only blob ids for script content.

Murchison                 Expires 25 April 2024                [Page 24]
Internet-Draft                 JMAP Sieve                   October 2023

   *  Added "rateLimit" and "requestTooLarge" to the list of possible
      error codes for /set method.

   *  Added Compatibility with JMAP Vacation Response section.

   *  Added RFC5228 to Security Considerations.

   *  Miscellaneous editorial changes.

   Changes since ietf-01:

   *  Removed normative references to ManageSieve (RFC 5804).

   *  Added the 'maxSizeScriptName' capability.

   *  Made the 'name' property in the SieveScript object optional.

   *  Added requirements for the 'name' property in the SieveScript
      object.

   *  Removed the 'blobId' property from the SieveScript object.

   *  Removed the 'replaceOnCreate' argument from the /set method.

   *  Removed the 'blobId' argument from the /validate method.

   *  Removed the 'scriptBlobId' argument from, and added the
      'scriptContent' argument to, the /test method.

   *  Editorial fixes from Neil Jenkins and Ricardo Signes.

   *  Other miscellaneous text reorganization and editorial fixes.

   Changes since ietf-00:

   *  Specified that changes made by onSuccessActivateScript MUST be
      reported in the /set response as created and/or updated as
      appropriate.

   *  Reworked and specified more of the /test response based on
      implementation experience.

   Changes since murchison-01:

   *  Explicitly stated that Sieve capability strings are case-
      sensitive.

   *  errorDescription is now String|null.

Murchison                 Expires 25 April 2024                [Page 25]
Internet-Draft                 JMAP Sieve                   October 2023

   *  Added /query method.

   *  Added /test method.

   Changes since murchison-00:

   *  Added IANA registration for "scriptIsActive" JMAP error code.

   *  Added open issue about /set{create} with an existing script name.

Author's Address

   Kenneth Murchison
   Fastmail US LLC
   1429 Walnut Street - Suite 1201
   Philadelphia, PA 19102
   United States of America
   Email: murch@fastmailteam.com

Murchison                 Expires 25 April 2024                [Page 26]