Skip to main content

JMAP for Sieve Scripts
draft-ietf-jmap-sieve-19

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 9661.
Author Kenneth Murchison
Last updated 2024-02-29 (Latest revision 2024-02-07)
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state Submitted to IESG for Publication
Associated WG milestone
Dec 2023
Submit Sieve document to the IESG
Document shepherd Bron Gondwana
Shepherd write-up Show Last changed 2024-01-03
IESG IESG state Became RFC 9661 (Proposed Standard)
Consensus boilerplate Yes
Telechat date (None)
Responsible AD Murray Kucherawy
Send notices to brong@fastmailteam.com
IANA IANA review state Version Changed - Review Needed
IANA expert review state Expert Reviews OK
IANA expert review comments The JMAP Data Types, JMAP Capabilities and JMAP Error Codes registrations have all been approved.
draft-ietf-jmap-sieve-19
JMAP                                                        K. Murchison
Internet-Draft                                                  Fastmail
Intended status: Standards Track                         7 February 2024
Expires: 10 August 2024

                         JMAP for Sieve Scripts
                        draft-ietf-jmap-sieve-19

Abstract

   This document specifies a data model for managing Sieve scripts on a
   server using the JSON Meta Application Protocol (JMAP).  Clients can
   use this protocol to efficiently search, access, organize, and
   validate Sieve scripts.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 10 August 2024.

Copyright Notice

   Copyright (c) 2024 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Murchison                Expires 10 August 2024                 [Page 1]
Internet-Draft                 JMAP Sieve                  February 2024

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Notational Conventions  . . . . . . . . . . . . . . . . .   3
     1.2.  Addition to the Capabilities Object . . . . . . . . . . .   3
       1.2.1.  urn:ietf:params:jmap:sieve  . . . . . . . . . . . . .   3
       1.2.2.  Example . . . . . . . . . . . . . . . . . . . . . . .   4
   2.  Sieve Scripts . . . . . . . . . . . . . . . . . . . . . . . .   6
     2.1.  Sieve Script Properties . . . . . . . . . . . . . . . . .   6
     2.2.  Sieve Script Content  . . . . . . . . . . . . . . . . . .   7
     2.3.  SieveScript/get . . . . . . . . . . . . . . . . . . . . .   7
       2.3.1.  Examples  . . . . . . . . . . . . . . . . . . . . . .   7
     2.4.  SieveScript/set . . . . . . . . . . . . . . . . . . . . .  10
       2.4.1.  Examples  . . . . . . . . . . . . . . . . . . . . . .  11
     2.5.  SieveScript/query . . . . . . . . . . . . . . . . . . . .  17
     2.6.  SieveScript/validate  . . . . . . . . . . . . . . . . . .  18
   3.  Quotas  . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
   4.  Compatibility with JMAP Vacation Response . . . . . . . . . .  19
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .  19
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  19
     6.1.  JMAP Capability Registration for "sieve"  . . . . . . . .  19
     6.2.  JMAP Data Type Registration for "SieveScript" . . . . . .  20
     6.3.  JMAP Error Codes Registry . . . . . . . . . . . . . . . .  20
       6.3.1.  invalidSieve  . . . . . . . . . . . . . . . . . . . .  20
       6.3.2.  sieveIsActive . . . . . . . . . . . . . . . . . . . .  20
   7.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .  21
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  21
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .  21
     8.2.  Informative References  . . . . . . . . . . . . . . . . .  22
   Appendix A.  Change History (To be removed by RFC Editor before
           publication)  . . . . . . . . . . . . . . . . . . . . . .  22
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  26

1.  Introduction

   JMAP [RFC8620] (JSON Meta Application Protocol) is a generic protocol
   for synchronizing data, such as mail, calendars or contacts, between
   a client and a server.  It is optimized for mobile and web
   environments, and aims to provide a consistent interface to different
   data types.

   This specification defines a data model for managing Sieve [RFC5228]
   scripts on a server using JMAP.  The data model is designed to allow
   a server to provide consistent access to the same scripts via
   ManageSieve [RFC5804] as well as JMAP.

Murchison                Expires 10 August 2024                 [Page 2]
Internet-Draft                 JMAP Sieve                  February 2024

1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   Type signatures, examples, and property descriptions in this document
   follow the conventions established in Section 1.1 of [RFC8620].  This
   document also uses data types and terminology established in Sections
   1.2-1.6 of [RFC8620].

   The term SieveScript (with this specific capitalization) is used to
   refer to the data type defined in this document and instances of
   those data types.  Servers MUST support all properties specified for
   the data type defined in this document.

   For brevity, JMAP API (see Section 3 of [RFC8620]) examples only show
   the "methodCalls" property of the Request object, and the
   "methodResponses" property of the Response object.  All other
   examples are shown using the HTTP 1.1 [RFC9112] protocol.

1.2.  Addition to the Capabilities Object

   The capabilities object is returned as part of the JMAP Session
   object; see [RFC8620], Section 2.  This document defines one
   additional capability URI.

1.2.1.  urn:ietf:params:jmap:sieve

   The urn:ietf:params:jmap:sieve URI represents support for the
   SieveScript data type and associated API methods.  The value of this
   property in the JMAP Session capabilities property is an object that
   MUST contain the following information on server capabilities:

   *  *implementation*: String

      The name and version of the Sieve implementation.

   The value of this property in an account's accountCapabilities
   property is an object that MUST contain the following information on
   per-account server capabilities:

   *  *maxSizeScriptName*: UnsignedInt

Murchison                Expires 10 August 2024                 [Page 3]
Internet-Draft                 JMAP Sieve                  February 2024

      The maximum length, in (UTF-8) octets, allowed for the name of a
      SieveScript.  For compatibility with ManageSieve, this MUST be at
      least 512 (up to 128 Unicode characters).

   *  *maxSizeScript*: UnsignedInt|null

      The maximum size (in octets) of a Sieve script the server is
      willing to store for the user, or null for no limit.

   *  *maxNumberScripts*: UnsignedInt|null

      The maximum number of Sieve scripts the server is willing to store
      for the user, or null for no limit.

   *  *maxNumberRedirects*: UnsignedInt|null

      The maximum number of Sieve "redirect" actions a script can
      perform during a single evaluation or null for no limit.  Note
      that this is different from the total number of "redirect" actions
      a script can contain.

   *  *sieveExtensions*: String[]

      A list of case-sensitive Sieve capability strings (as listed in
      Sieve "require" action; see [RFC5228], Section 3.2) indicating the
      extensions supported by the Sieve engine.

   *  *notificationMethods*: String[]|null

      A list of URI schema parts [RFC3986] for notification methods
      supported by the Sieve "enotify" [RFC5435] extension, or null if
      the extension is not supported by the Sieve engine.

   *  *externalLists*: String[]|null

      A list of URI schema parts [RFC3986] for externally stored list
      types supported by the Sieve "extlists" [RFC6134] extension, or
      null if the extension is not supported by the Sieve engine.

1.2.2.  Example

   A JMAP Session object showing a user that has access to their own
   Sieve scripts with support for a few Sieve extensions:

Murchison                Expires 10 August 2024                 [Page 4]
Internet-Draft                 JMAP Sieve                  February 2024

   {
     "capabilities": {
       "urn:ietf:params:jmap:core": {
         ...
       },
       "urn:ietf:params:jmap:mail": {},
       "urn:ietf:params:jmap:quota": {},
       "urn:ietf:params:jmap:blob": {},
       "urn:ietf:params:jmap:sieve": {
         "implementation": "ACME Email Filtering"
       },
       "urn:ietf:params:jmap:vacationresponse": {},
       ...
     },
     "accounts": {
       "ken": {
         "name": "ken@example.com",
         "isPersonal": true,
         "isReadOnly": false,
         "accountCapabilities": {
           "urn:ietf:params:jmap:core": {},
           "urn:ietf:params:jmap:quota": {},
           "urn:ietf:params:jmap:mail": {
             ...
           },
           "urn:ietf:params:jmap:blob": {
             "supportedTypeNames": [
               "Email"
               "SieveScript",
               ...
             ],
             ...
           },
           "urn:ietf:params:jmap:sieve": {
             "maxSizeScriptName": 512,
             "maxSizeScript": 65536,
             "maxNumberScripts": 5,
             "maxNumberRedirects": null,
             "sieveExtensions": [
               "fileinto",
               "imap4flags",
               "enotify",
               ...
             ],
             "notificationMethods": [
               "mailto"
             ],
             "externalLists": null,

Murchison                Expires 10 August 2024                 [Page 5]
Internet-Draft                 JMAP Sieve                  February 2024

           },
           "urn:ietf:params:jmap:vacationresponse": {},
           ...
         },
         ...
       }
     },
     "primaryAccounts": {
       "urn:ietf:params:jmap:mail": "ken",
       "urn:ietf:params:jmap:sieve": "ken",
       "urn:ietf:params:jmap:vacationresponse": "ken",
       ...
     },
     "username": "ken@example.com",
     "apiUrl": "/jmap/",
     "downloadUrl":
       "/jmap/download/{accountId}/{blobId}/{name}?accept={type}",
     "uploadUrl": "/jmap/upload/{accountId}/",
     ...
   }

2.  Sieve Scripts

   A *SieveScript* object represents a single Sieve [RFC5228] script for
   filtering email messages at time of final delivery.

2.1.  Sieve Script Properties

   A *SieveScript* object has the following properties:

   *  *id*: Id (immutable; server-set)

      The id of the script.

   *  *name*: String|null (optional; default is server-dependent)

      User-visible name for the SieveScript.  If non-null, this MUST be
      a Net-Unicode [RFC5198] string of at least 1 character in length,
      subject to the maximum size given in the capability object.  For
      compatibility with ManageSieve, servers MUST reject names that
      contain control characters.  Servers MAY reject names that violate
      server policy (e.g., names containing slash (/)).  The name MUST
      be unique among all SieveScripts within an account.

   *  *blobId*: Id

      The id of the blob containing the raw octets of the script.

Murchison                Expires 10 August 2024                 [Page 6]
Internet-Draft                 JMAP Sieve                  February 2024

   *  *isActive*: Boolean (server-set; default: false)

      Indicator that the SieveScript is actively filtering incoming
      messages.  A user may have at most one active script.  The
      SieveScript/set (Section 2.4) method is used for changing the
      active script or disabling Sieve processing.

2.2.  Sieve Script Content

   A script MUST be UTF-8 [RFC3629] content of at least 1 character in
   length, subject to the syntax of Sieve [RFC5228].  A script MUST NOT
   contain any "require" statement(s) mentioning Sieve capability
   strings not present in the capability (Section 1.2.1) object.  Note
   that if the Sieve "ihave" [RFC5463] capability string is present in
   the capability object, the script MAY mention unrecognized/
   unsupported extensions in the "ihave" test.

   Script content is treated as a binary blob and uploaded/downloaded
   via the mechanisms in [RFC8620] Sections 6.1/6.2 respectively and/or
   via the JMAP Blob management methods in [RFC9404] Sections 4.1/4.2
   respectively.

   Downloading script content via the JMAP downloadUrl or the Blob/get
   method provides equivalent functionality to the GETSCRIPT command in
   [RFC5804].

2.3.  SieveScript/get

   This is a standard "/get" method as described in [RFC8620],
   Section 5.1.  The _ids_ argument may be null to fetch all scripts at
   once.

   This method provides equivalent functionality to the LISTSCRIPTS
   command in [RFC5804].

2.3.1.  Examples

   JMAP API Request (and response) to list all scripts:

Murchison                Expires 10 August 2024                 [Page 7]
Internet-Draft                 JMAP Sieve                  February 2024

   [
     ["SieveScript/get", {
       "accountId": "ken"
     }, "0"]
   ]

   [
     [
       "SieveScript/get",
       {
         "state": "1634915373.240633104-120",
         "list": [
           {
             "id": "2d647053-dded-418d-917a-63eda3ac8f7b",
             "name": "test1",
             "isActive": true,
             "blobId": "S7"
           }
         ],
         "notFound": [],
         "accountId": "ken"
       },
       "0"
     ]
   ]

   Request (and response) to download the script content via the JMAP
   downloadUrl as advertised in Section 1.2.2:

   GET /jmap/download/ken/S7/test1.siv?accept=application/sieve HTTP/1.1
   Host: jmap.example.com
   Authorization: Basic a2VuOnBhc3N3b3Jk

   HTTP/1.1 200 OK
   Date: Fri, 22 Oct 2021 15:27:38 GMT
   Content-Type: application/sieve; charset=utf-8
   Content-Disposition: attachment; filename="test1.siv"
   Content-Length: 49

   require ["fileinto"];
   fileinto "INBOX.target";

   Request (and response) to fetch script properties and content in a
   single JMAP API request using the JMAP Blob management extension
   [RFC9404]:

Murchison                Expires 10 August 2024                 [Page 8]
Internet-Draft                 JMAP Sieve                  February 2024

   [
     ["SieveScript/get", {
       "accountId": "ken",
       "ids": [ "2d647053-dded-418d-917a-63eda3ac8f7b" ]
     }, "0"],
     ["Blob/get", {
       "accountId": "ken",
       "#ids": {
         "resultOf": "0",
         "name": "SieveScript/get",
         "path": "/list/*/blobId"
       }
     }, "1"]
   ]

   [
     [
       "SieveScript/get",
       {
         "state": "1634915373.240633104-120",
         "list": [
           {
             "id": "2d647053-dded-418d-917a-63eda3ac8f7b",
             "name": "test1",
             "isActive": true,
             "blobId": "S7"
           }
         ],
         "notFound": [],
         "accountId": "ken"
       },
       "0"
     ],
     [
       "Blob/get",
       {
         "list": [
           {
             "id": "S7",
             "data:asText":
        "require [\"fileinto\"];\\r\\nfileinto \"INBOX.target\";\\r\\n",
             "size": 49
           }
         ],
         "notFound": [],
         "accountId": "ken"
       },
       "1"

Murchison                Expires 10 August 2024                 [Page 9]
Internet-Draft                 JMAP Sieve                  February 2024

     ]
   ]

2.4.  SieveScript/set

   This is a standard "/set" method as described in [RFC8620],
   Section 5.3 but with the following additional request arguments,
   either or both of which may be omitted:

   *  *onSuccessActivateScript*: Id (optional)

      The id of the SieveScript to activate if and only if all of the
      creations, modifications, and destructions (if any) succeed.  (For
      references to SieveScript creations, this is equivalent to a
      creation-reference, so the id will be the creation id prefixed
      with a "#".)  The currently active SieveScript (if any) will be
      deactivated before activating the specified SieveScript.

      If the id is either illegal or nonexistent, it MUST be ignored and
      the currently active SieveScript (if any) will remain as such.

      The id of any activated SieveScript MUST be reported in either the
      "created" or "updated" argument in the response as appropriate,
      including a value of "true" for the "isActive" property.  The id
      of any deactivated SieveScript MUST be reported in the "updated"
      argument in the response, including a value of "false" for the
      "isActive" property.

   *  *onSuccessDeactivateScript*: Boolean (optional)

      If true, the currently active SieveScript (if any) will be
      deactivated if and only if all of the creations, modifications,
      and destructions (if any) succeed.  If false, the currently active
      SieveScript (if any) will remain as such.

      The id of any deactivated SieveScript MUST be reported in the
      "updated" argument in the response, including a value of "false"
      for the "isActive" property.

   If both the *onSuccessActivateScript* and *onSuccessDeactivateScript*
   arguments are present in the request, then
   *onSuccessDeactivateScript* MUST be processed first.  If neither
   argument is present in the request, the currently active SieveScript
   (if any) will remain as such.

   This method provides equivalent functionality to the PUTSCRIPT,
   DELETESCRIPT, RENAMESCRIPT, and SETACTIVE commands in [RFC5804].

Murchison                Expires 10 August 2024                [Page 10]
Internet-Draft                 JMAP Sieve                  February 2024

   Script content must first be uploaded as per Section 2.2 prior to
   referencing it in a SieveScript/set call.

   If the SieveScript can not be created or updated because it would
   result in two SieveScripts with the same name, the server MUST reject
   the request with an "alreadyExists" SetError.  An "existingId"
   property of type "Id" MUST be included on the SetError object with
   the id of the existing SieveScript.

   If the SieveScript can not be created or updated because its size
   exceeds the "maxSizeScript" limit, the server MUST reject the request
   with a "tooLarge" SetError.

   If the SieveScript can not be created because it would exceed the
   "maxNumberScripts" limit or would exceed a server-imposed storage
   limit, the server MUST reject the request with an "overQuota"
   SetError.

   The active SieveScript MUST NOT be destroyed unless it is first
   deactivated in a separate SieveScript/set method call.

   The following extra SetError types are defined:

   For "create" and "update":

   *  *invalidSieve*:

      The SieveScript content violates the Sieve [RFC5228] grammar and/
      or one or more extensions mentioned in the script's "require"
      statement(s) are not supported by the Sieve interpreter.  The
      _description_ property on the SetError object SHOULD contain a
      specific error message giving at least the line number of the
      first error.

   For "destroy":

   *  *sieveIsActive*:

      The SieveScript is active.

2.4.1.  Examples

   Request (and response) to upload a script requiring the Imap4Flags
   [RFC5232] Extension using the JMAP uploadUrl as advertised in
   Section 1.2.2:

Murchison                Expires 10 August 2024                [Page 11]
Internet-Draft                 JMAP Sieve                  February 2024

   POST /jmap/upload/ken/ HTTP/1.1
   Host: jmap.example.com
   Authorization: Basic a2VuOnBhc3N3b3Jk
   Content-Type: application/sieve
   Content-Length: 98

   require "imapflags";

   if address :is ["To", "Cc"] "jmap@ietf.org" {
     setflag "\\Flagged";
   }

   HTTP/1.1 201 Created
   Date: Thu, 10 Dec 2020 17:14:31 GMT
   Content-Type: application/json; charset=utf-8
   Content-Length: 171

   {
     "accountId": "ken",
     "blobId": "Gabcc83e44a6e19991c4568d0b94e1767c83dd123",
     "type": "application/sieve"
     "size": 98
   }

   JMAP API Request (and response) to create and activate a script using
   the uploaded blob.  Note that the response shows that an existing
   active script has been deactivated in lieu of the newly created
   script being activated.

Murchison                Expires 10 August 2024                [Page 12]
Internet-Draft                 JMAP Sieve                  February 2024

   [
     ["SieveScript/set", {
       "accountId": "ken",
       "create": {
         "A": {
           "name": null,
           "blobId": "Gabcc83e44a6e19991c4568d0b94e1767c83dd123"
         }
       },
       "onSuccessActivateScript": "#A"
     }, "0"]
   ]

   [
     [
       "SieveScript/set",
       {
         "oldState": "1603741717.50737918-4096",
         "newState": "1603741751.227268529-4096",
         "created": {
           "A": {
             "id": "dd1b164f-8cdc-448c-9f54",
             "name": "ken-20201210T171432-0",
             "blobId": "Sdd1b164f-8cdc-448c-9f54",
             "isActive": true
           }
         },
         "updated": {
           "8abd6f4a-bcb4d-87650-3fcd": {
             "isActive": false
           }
         },
         "destroyed": null,
         "notCreated": null,
         "notUpdated": null,
         "notDestroyed": null,
         "accountId": "ken"
       },
       "0"
     ]
   ]

   JMAP API Request (and response) to update script content using the
   JMAP Blob management extension [RFC9404]:

Murchison                Expires 10 August 2024                [Page 13]
Internet-Draft                 JMAP Sieve                  February 2024

   {
   [
     ["Blob/upload", {
       "accountId": "ken",
       "create": {
         "B": {
           "data": [ {
             "data:asText":
               "redirect \"ken@example.com\"\r\n;"
            } ],
           "type": "application/sieve"
         }
       }
     }, "1"],
     ["SieveScript/set", {
       "accountId": "ken",
       "update": { "dd1b164f-8cdc-448c-9f54": {
         "blobId": "#B"
         }
       }
     }, "2"]
   ]

   [
     [
       "Blob/upload",
       {
         "oldState": null,
         "newState": "1603741700.309607123-0128",
         "created": {
           "B": {
             "id": "G969c83e44a6e10871c4568d0b94e1767c83ddeae",
             "blobId": "G969c83e44a6e10871c4568d0b94e1767c83ddeae",
             "type": "application/sieve",
             "size": 29
           }
         },
         "notCreated": null,
         "accountId": "ken"
       },
       "1"
     ],
     [
       "SieveScript/set",
       {
         "oldState": "1603741751.227268529-4096",
         "newState": "1603742603.309607868-4096",
         "created": null,

Murchison                Expires 10 August 2024                [Page 14]
Internet-Draft                 JMAP Sieve                  February 2024

         "updated": {
           "dd1b164f-8cdc-448c-9f54": null
         },
         "destroyed": null,
         "notCreated": null,
         "notUpdated": null,
         "notDestroyed": null,
         "accountId": "ken"
       },
       "2"
     ]
   ]

   JMAP API Request (and response) to update script name and deactivate:

   [
     ["SieveScript/set", {
       "accountId": "ken",
       "update": { "dd1b164f-8cdc-448c-9f54": {
         "name": "myscript"
         }
       },
       "onSuccessDeactivateScript": true
     }, "3"]
   ]

   [
     [
       "SieveScript/set",
       {
         "oldState": "1603742603.309607868-4096",
         "newState": "1603742967.852315428-4096",
         "created": null,
         "updated": {
           "dd1b164f-8cdc-448c-9f54": {
             "isActive": false
           }
         },
         "destroyed": null,
         "notCreated": null,
         "notUpdated": null,
         "notDestroyed": null,
         "accountId": "ken"
       },
       "3"
     ]
   ]

Murchison                Expires 10 August 2024                [Page 15]
Internet-Draft                 JMAP Sieve                  February 2024

   JMAP API Request (and response) to activate a script:

   [
     ["SieveScript/set", {
       "accountId": "ken",
       "onSuccessActivateScript": "dd1b164f-8cdc-448c-9f54"
     }, "4"]
   ]

   [
     [
       "SieveScript/set",
       {
         "oldState": "1603742967.852315428-4096",
         "newState": "1603744460.316617118-4096",
         "created": null,
         "updated": {
           "dd1b164f-8cdc-448c-9f54": {
             "isActive": true
           }
         },
         "destroyed": null,
         "notCreated": null,
         "notUpdated": null,
         "notDestroyed": null,
         "accountId": "ken"
       },
       "4"
     ]
   ]

   JMAP API Requests (and responses) to deactivate and destroy the
   active script:

   [
     ["SieveScript/set", {
       "accountId": "ken",
       "onSuccessDeactivateScript": true
     }, "5"],
     ["SieveScript/set", {
       "accountId": "ken",
       "destroy": [ "dd1b164f-8cdc-448c-9f54" ]
     }, "6"]
   ]

   [
     [
       "SieveScript/set",

Murchison                Expires 10 August 2024                [Page 16]
Internet-Draft                 JMAP Sieve                  February 2024

       {
         "oldState": "1603744460.316617118-4096",
         "newState": "1603744637.575375572-4096",
         "created": null,
         "updated": {
           "dd1b164f-8cdc-448c-9f54": {
             "isActive": false
           }
         },
         "destroyed": null,
         "notCreated": null,
         "notUpdated": null,
         "notDestroyed": null,
         "accountId": "ken"
       },
       "5"
     ],
     [
       "SieveScript/set",
       {
         "oldState": "1603744637.575375572-4096",
         "newState": "1603744637.854390875-4096",
         "created": null,
         "updated": null,
         "destroyed": [
           "dd1b164f-8cdc-448c-9f54"
         ],
         "notCreated": null,
         "notUpdated": null,
         "notDestroyed": null,
         "accountId": "ken"
       },
       "6"
     ]
   ]

2.5.  SieveScript/query

   This is a standard "/query" method as described in [RFC8620],
   Section 5.5.  A _FilterCondition_ object has the following
   properties, either of which may be omitted:

   *  *name*: String

      The SieveScript "name" property contains the given string.

   *  *isActive*: Boolean

Murchison                Expires 10 August 2024                [Page 17]
Internet-Draft                 JMAP Sieve                  February 2024

      The "isActive" property of the SieveScript must be identical to
      the value given to match the condition.

   The following SieveScript properties MUST be supported for sorting:

   *  *name*

   *  *isActive*

2.6.  SieveScript/validate

   This method is used by the client to verify Sieve script validity
   without storing the script on the server, providing equivalent
   functionality to the CHECKSCRIPT command in [RFC5804].

   The method takes the following arguments:

   *  *accountId*: Id

      The id of the account to use.

   *  *blobId*: Id

      The id of the blob containing the raw octets of the script to
      validate, subject to the same requirements in Section 2.

   The response has the following arguments:

   *  *accountId*: Id

      The id of the account used for this call.

   *  *error*: SetError|null

      An "invalidSieve" SetError object if the script content is invalid
      (see Section 2.4), or null if the script content is valid.

   As with the SieveScript/set (Section 2.4) method, script content must
   first be uploaded as a blob using either the standard upload
   mechanism (see [RFC8620], Section 6.1) or the JMAP Blob management
   extension (see [RFC9404], Section 4.1).

Murchison                Expires 10 August 2024                [Page 18]
Internet-Draft                 JMAP Sieve                  February 2024

3.  Quotas

   Servers SHOULD impose quotas on Sieve scripts to prevent malicious
   users from exceeding available storage.  Administration of such
   quotas is outside of the scope of this specification, however
   [RFC9425] defines a data model for users to obtain quota details over
   JMAP.

   The mechanism for handling SieveScript requests that would place a
   user over a quota setting is discussed in Section 2.4.

4.  Compatibility with JMAP Vacation Response

   Section 8 of [RFC8621] defines a VacationResponse object to represent
   an autoresponder to incoming email messages.  Servers that implement
   the VacationResponse as a Sieve script that resides amongst other
   user scripts are subject to the following requirements:

   *  MUST allow the VacationResponse Sieve script to be fetched by the
      SieveScript/get (Section 2.3) method.

   *  MUST allow the VacationResponse Sieve script to be [de]activated
      via the "onSuccessActivateScript" argument to the SieveScript/set
      (Section 2.4) method.

   *  MUST NOT allow the VacationResponse Sieve script to be destroyed
      or have its content updated by the SieveScript/set (Section 2.4)
      method.  Any such request MUST be rejected with a "forbidden"
      SetError.  A "description" property MAY be present with an
      explanation that the script can only be modified by a
      VacationResponse/set method.

5.  Security Considerations

   All security considerations of JMAP [RFC8620] and Sieve [RFC5228]
   apply to this specification.

6.  IANA Considerations

6.1.  JMAP Capability Registration for "sieve"

   IANA will register the "sieve" JMAP Capability as follows:

   Capability Name: urn:ietf:params:jmap:sieve

   Specification document: this document

   Intended use: common

Murchison                Expires 10 August 2024                [Page 19]
Internet-Draft                 JMAP Sieve                  February 2024

   Change Controller: IETF

   Security and privacy considerations: this document, Section 5

6.2.  JMAP Data Type Registration for "SieveScript"

   IANA will register the "SieveScript" JMAP Data Type as follows:

   Type Name: SieveScript

   Can Reference Blobs: yes

   Can Use for State Change: yes

   Capability: urn:ietf:params:jmap:sieve

   Specification document: this document

6.3.  JMAP Error Codes Registry

   The following sub-sections register two new error codes in the JMAP
   Error Codes registry, as defined in [RFC8620].

6.3.1.  invalidSieve

   JMAP Error Code: invalidSieve

   Intended use: common

   Change controller: IETF

   Reference: This document, Section 2.4

   Description: The SieveScript violates the Sieve grammar [RFC5228]
   and/or one or more extensions mentioned in the script's "require"
   statement(s) are not supported by the Sieve interpreter.

6.3.2.  sieveIsActive

   JMAP Error Code: sieveIsActive

   Intended use: common

   Change controller: IETF

   Reference: This document, Section 2.4

   Description: The client tried to destroy the active SieveScript.

Murchison                Expires 10 August 2024                [Page 20]
Internet-Draft                 JMAP Sieve                  February 2024

7.  Acknowledgments

   The concepts in this document are based largely on those in
   [RFC5804].  The author would like to thank the authors of that
   document for providing both inspiration and some borrowed text for
   this document.

   The author would also like to thank the following individuals for
   contributing their ideas and support for writing this specification:
   Joris Baum, Mauro De Gennaro, Bron Gondwana, Neil Jenkins, Alexey
   Melnikov, and Ricardo Signes.

8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
              2003, <https://www.rfc-editor.org/info/rfc3629>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, DOI 10.17487/RFC3986, January 2005,
              <https://www.rfc-editor.org/info/rfc3986>.

   [RFC5198]  Klensin, J. and M. Padlipsky, "Unicode Format for Network
              Interchange", RFC 5198, DOI 10.17487/RFC5198, March 2008,
              <https://www.rfc-editor.org/info/rfc5198>.

   [RFC5228]  Guenther, P., Ed. and T. Showalter, Ed., "Sieve: An Email
              Filtering Language", RFC 5228, DOI 10.17487/RFC5228,
              January 2008, <https://www.rfc-editor.org/info/rfc5228>.

   [RFC5435]  Melnikov, A., Ed., Leiba, B., Ed., Segmuller, W., and T.
              Martin, "Sieve Email Filtering: Extension for
              Notifications", RFC 5435, DOI 10.17487/RFC5435, January
              2009, <https://www.rfc-editor.org/info/rfc5435>.

   [RFC6134]  Melnikov, A. and B. Leiba, "Sieve Extension: Externally
              Stored Lists", RFC 6134, DOI 10.17487/RFC6134, July 2011,
              <https://www.rfc-editor.org/info/rfc6134>.

Murchison                Expires 10 August 2024                [Page 21]
Internet-Draft                 JMAP Sieve                  February 2024

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8620]  Jenkins, N. and C. Newman, "The JSON Meta Application
              Protocol (JMAP)", RFC 8620, DOI 10.17487/RFC8620, July
              2019, <https://www.rfc-editor.org/info/rfc8620>.

   [RFC8621]  Jenkins, N. and C. Newman, "The JSON Meta Application
              Protocol (JMAP) for Mail", RFC 8621, DOI 10.17487/RFC8621,
              August 2019, <https://www.rfc-editor.org/info/rfc8621>.

8.2.  Informative References

   [RFC5232]  Melnikov, A., "Sieve Email Filtering: Imap4flags
              Extension", RFC 5232, DOI 10.17487/RFC5232, January 2008,
              <https://www.rfc-editor.org/info/rfc5232>.

   [RFC5463]  Freed, N., "Sieve Email Filtering: Ihave Extension",
              RFC 5463, DOI 10.17487/RFC5463, March 2009,
              <https://www.rfc-editor.org/info/rfc5463>.

   [RFC5804]  Melnikov, A., Ed. and T. Martin, "A Protocol for Remotely
              Managing Sieve Scripts", RFC 5804, DOI 10.17487/RFC5804,
              July 2010, <https://www.rfc-editor.org/info/rfc5804>.

   [RFC9112]  Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
              Ed., "HTTP/1.1", STD 99, RFC 9112, DOI 10.17487/RFC9112,
              June 2022, <https://www.rfc-editor.org/info/rfc9112>.

   [RFC9404]  Gondwana, B., Ed., "JSON Meta Application Protocol (JMAP)
              Blob Management Extension", RFC 9404,
              DOI 10.17487/RFC9404, August 2023,
              <https://www.rfc-editor.org/info/rfc9404>.

   [RFC9425]  Cordier, R., Ed., "JSON Meta Application Protocol (JMAP)
              for Quotas", RFC 9425, DOI 10.17487/RFC9425, June 2023,
              <https://www.rfc-editor.org/info/rfc9425>.

Appendix A.  Change History (To be removed by RFC Editor before
             publication)

   Changes since ietf-18:

   *  Edited JMAP API examples for brevity to match other JMAP specs,
      and added explanatory text to 1.1.

Murchison                Expires 10 August 2024                [Page 22]
Internet-Draft                 JMAP Sieve                  February 2024

   *  Updated <xref> elements to to use "section" and "sectionFormat"
      attributes.

   Changes since ietf-17:

   *  Several editorial changes resulting from IESG review comments.

   *  Added a section discussuing quotas.

   Changes since ietf-16:

   *  Renamed the "invalidScript" and "scriptIsActive" SetErrors to
      "invalidSieve" and "sieveIsActive" respectively.

   Changes since ietf-15:

   *  Added registration for SieveScript JMAP Data Type.

   *  Miscellaneous editorial changes.

   Changes since ietf-14:

   *  Updated reference for JMAP Blobs.

   Changes since ietf-13:

   *  Added implementation argument to capabilities.

   *  Miscellaneous editorial changes.

   Changes since ietf-12:

   *  Added onSuccessDeactivateScipt argument to /set method.

   *  Clarified that the "isActive" property must be included in the
      created/uodated/destroyed arguments in a response of the active
      script is changed and/or deactivated.

   *  Miscellaneous editorial changes.

   Changes since ietf-11:

   *  Fixed examples to be proper JSON and JMAP.

   Changes since ietf-10:

   *  Fixed SieveScript/set response deactivating script example.

Murchison                Expires 10 August 2024                [Page 23]
Internet-Draft                 JMAP Sieve                  February 2024

   *  Fixed line line nit in Blob/get request.

   *  Removed unused references.

   Changes since ietf-09:

   *  Fixed Blob/upload request in example.

   Changes since ietf-08:

   *  Fixed Blob/upload response in example.

   *  Removed SieveScript/test method (to be written as an extension
      document).

   Changes since ietf-07:

   *  Updated example to use Blob/upload rather than Blob/set.

   Changes since ietf-06:

   *  None (refreshed to avoid expiration).

   Changes since ietf-05:

   *  Converted source from xml2rfc v2 to v3.

   *  Added examples for SieveScript/get.

   *  Miscellaneous editorial changes.

   Changes since ietf-04:

   *  SieveScript/test: Switched from using a JSON array for each
      completed action and its args to a JSON object.

   *  Switched to referencing draft-ietf-jmap-blob.

   *  Miscellaneous editorial changes.

   Changes since ietf-03:

   *  SieveScript/test: Moved positional arguments into their own array
      (because the specfications don't use a consistent method for
      defining the action syntax or naming of positional arguments).

   Changes since ietf-02:

Murchison                Expires 10 August 2024                [Page 24]
Internet-Draft                 JMAP Sieve                  February 2024

   *  Removed open issues.

   *  Reverted back to using only blob ids for script content.

   *  Added "rateLimit" and "requestTooLarge" to the list of possible
      error codes for /set method.

   *  Added Compatibility with JMAP Vacation Response section.

   *  Added RFC5228 to Security Considerations.

   *  Miscellaneous editorial changes.

   Changes since ietf-01:

   *  Removed normative references to ManageSieve (RFC 5804).

   *  Added the 'maxSizeScriptName' capability.

   *  Made the 'name' property in the SieveScript object optional.

   *  Added requirements for the 'name' property in the SieveScript
      object.

   *  Removed the 'blobId' property from the SieveScript object.

   *  Removed the 'replaceOnCreate' argument from the /set method.

   *  Removed the 'blobId' argument from the /validate method.

   *  Removed the 'scriptBlobId' argument from, and added the
      'scriptContent' argument to, the /test method.

   *  Editorial fixes from Neil Jenkins and Ricardo Signes.

   *  Other miscellaneous text reorganization and editorial fixes.

   Changes since ietf-00:

   *  Specified that changes made by onSuccessActivateScript MUST be
      reported in the /set response as created and/or updated as
      appropriate.

   *  Reworked and specified more of the /test response based on
      implementation experience.

   Changes since murchison-01:

Murchison                Expires 10 August 2024                [Page 25]
Internet-Draft                 JMAP Sieve                  February 2024

   *  Explicitly stated that Sieve capability strings are case-
      sensitive.

   *  errorDescription is now String|null.

   *  Added /query method.

   *  Added /test method.

   Changes since murchison-00:

   *  Added IANA registration for "scriptIsActive" JMAP error code.

   *  Added open issue about /set{create} with an existing script name.

Author's Address

   Kenneth Murchison
   Fastmail US LLC
   1429 Walnut Street - Suite 1201
   Philadelphia, PA 19102
   United States of America
   Email: murch@fastmailteam.com

Murchison                Expires 10 August 2024                [Page 26]