Skip to main content

I2NSF NSF Monitoring Interface YANG Data Model
draft-ietf-i2nsf-nsf-monitoring-data-model-19

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Active".
Authors Jaehoon Paul Jeong , Patrick Lingga , Susan Hares , Liang Xia , Henk Birkholz
Last updated 2022-05-26 (Latest revision 2022-05-23)
Replaces draft-hong-i2nsf-nsf-monitoring-data-model
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state Submitted to IESG for Publication
Document shepherd Linda Dunbar
Shepherd write-up Show Last changed 2021-02-23
IESG IESG state RFC Ed Queue
Consensus boilerplate Yes
Telechat date (None)
Responsible AD Roman Danyliw
Send notices to dunbar.ll@gmail.com
IANA IANA review state Version Changed - Review Needed
IANA action state RFC-Ed-Ack
IANA expert review state Expert Reviews OK
RFC Editor RFC Editor state MISSREF
Details
draft-ietf-i2nsf-nsf-monitoring-data-model-19
Network Working Group                                      J. Jeong, Ed.
Internet-Draft                                                 P. Lingga
Intended status: Standards Track                 Sungkyunkwan University
Expires: 24 November 2022                                       S. Hares
                                                                  L. Xia
                                                                  Huawei
                                                             H. Birkholz
                                                          Fraunhofer SIT
                                                             23 May 2022

             I2NSF NSF Monitoring Interface YANG Data Model
             draft-ietf-i2nsf-nsf-monitoring-data-model-19

Abstract

   This document proposes an information model and the corresponding
   YANG data model of an interface for monitoring Network Security
   Functions (NSFs) in the Interface to Network Security Functions
   (I2NSF) framework.  If the monitoring of NSFs is performed with the
   NSF monitoring interface in a standard way, it is possible to detect
   the indication of malicious activity, anomalous behavior, the
   potential sign of denial-of-service attacks, or system overload in a
   timely manner.  This monitoring functionality is based on the
   monitoring information that is generated by NSFs.  Thus, this
   document describes not only an information model for the NSF
   monitoring interface along with a YANG tree diagram, but also the
   corresponding YANG data model.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 24 November 2022.

Jeong, et al.           Expires 24 November 2022                [Page 1]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

Copyright Notice

   Copyright (c) 2022 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   4
   3.  Use Cases for NSF Monitoring Data . . . . . . . . . . . . . .   5
   4.  Classification of NSF Monitoring Data . . . . . . . . . . . .   5
     4.1.  Retention and Emission from NSFs  . . . . . . . . . . . .   6
     4.2.  Notifications for Events and Records  . . . . . . . . . .   8
     4.3.  Push and Pull for the retrieval of monitoring data from
           NSFs  . . . . . . . . . . . . . . . . . . . . . . . . . .   8
   5.  Basic Information Model for Monitoring Data . . . . . . . . .   9
   6.  Extended Information Model for Monitoring Data  . . . . . . .  10
     6.1.  System Alarms . . . . . . . . . . . . . . . . . . . . . .  11
       6.1.1.  Memory Alarm  . . . . . . . . . . . . . . . . . . . .  11
       6.1.2.  CPU Alarm . . . . . . . . . . . . . . . . . . . . . .  11
       6.1.3.  Disk (Storage) Alarm  . . . . . . . . . . . . . . . .  12
       6.1.4.  Hardware Alarm  . . . . . . . . . . . . . . . . . . .  12
       6.1.5.  Interface Alarm . . . . . . . . . . . . . . . . . . .  13
     6.2.  System Events . . . . . . . . . . . . . . . . . . . . . .  13
       6.2.1.  Access Violation  . . . . . . . . . . . . . . . . . .  13
       6.2.2.  Configuration Change  . . . . . . . . . . . . . . . .  14
       6.2.3.  Session Table Event . . . . . . . . . . . . . . . . .  15
       6.2.4.  Traffic Flows . . . . . . . . . . . . . . . . . . . .  15
     6.3.  NSF Events  . . . . . . . . . . . . . . . . . . . . . . .  16
       6.3.1.  DDoS Detection  . . . . . . . . . . . . . . . . . . .  17
       6.3.2.  Virus Event . . . . . . . . . . . . . . . . . . . . .  18
       6.3.3.  Intrusion Event . . . . . . . . . . . . . . . . . . .  19
       6.3.4.  Web Attack Event  . . . . . . . . . . . . . . . . . .  19
       6.3.5.  VoIP/VoCN Event . . . . . . . . . . . . . . . . . . .  20
     6.4.  System Logs . . . . . . . . . . . . . . . . . . . . . . .  21
       6.4.1.  Access Log  . . . . . . . . . . . . . . . . . . . . .  21
       6.4.2.  Resource Utilization Log  . . . . . . . . . . . . . .  22
       6.4.3.  User Activity Log . . . . . . . . . . . . . . . . . .  23
     6.5.  NSF Logs  . . . . . . . . . . . . . . . . . . . . . . . .  24

Jeong, et al.           Expires 24 November 2022                [Page 2]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       6.5.1.  Deep Packet Inspection Log  . . . . . . . . . . . . .  24
     6.6.  System Counter  . . . . . . . . . . . . . . . . . . . . .  24
       6.6.1.  Interface Counter . . . . . . . . . . . . . . . . . .  24
     6.7.  NSF Counters  . . . . . . . . . . . . . . . . . . . . . .  26
       6.7.1.  Firewall Counter  . . . . . . . . . . . . . . . . . .  26
       6.7.2.  Policy Hit Counter  . . . . . . . . . . . . . . . . .  27
   7.  YANG Tree Structure of NSF Monitoring YANG Module . . . . . .  28
   8.  YANG Data Model of NSF Monitoring YANG Module . . . . . . . .  34
   9.  I2NSF Event Stream  . . . . . . . . . . . . . . . . . . . . .  85
   10. XML Examples for I2NSF NSF Monitoring . . . . . . . . . . . .  86
     10.1.  I2NSF System Detection Alarm . . . . . . . . . . . . . .  86
     10.2.  I2NSF Interface Counters . . . . . . . . . . . . . . . .  88
   11. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  89
   12. Security Considerations . . . . . . . . . . . . . . . . . . .  90
   13. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .  92
   14. Contributors  . . . . . . . . . . . . . . . . . . . . . . . .  92
   15. References  . . . . . . . . . . . . . . . . . . . . . . . . .  92
     15.1.  Normative References . . . . . . . . . . . . . . . . . .  93
     15.2.  Informative References . . . . . . . . . . . . . . . . .  97
   Appendix A.  Changes from
           draft-ietf-i2nsf-nsf-monitoring-data-model-18 . . . . . .  98
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  98

1.  Introduction

   According to [RFC8329], the interface provided by a Network Security
   Function (NSF) (e.g., Firewall, IPS, or Anti-DDoS function) to enable
   the collection of monitoring information is referred to as an I2NSF
   Monitoring Interface.  This interface enables the sharing of vital
   data from the NSFs (e.g., events, records, and counters) to an NSF
   data collector (e.g., Security Controller) through a variety of
   mechanisms (e.g., queries and notifications).  The monitoring of NSF
   plays an important role in an overall security framework, if it is
   done in a timely way.  The monitoring information generated by an NSF
   can be a good, early indication of anomalous behavior or malicious
   activity, such as denial-of-service (DoS) attacks.

   This document defines an information model of an NSF monitoring
   interface that provides visibility into an NSF for the NSF data
   collector (note that an NSF data collector is defined as an entity to
   collect NSF monitoring data from an NSF, such as Security
   Controller).  It specifies the information and illustrates the
   methods that enable an NSF to provide the information required in
   order to be monitored in a scalable and efficient way via the NSF
   Monitoring Interface.  The information model for the NSF monitoring
   interface presented in this document is complementary for the
   security policy provisioning functionality of the NSF-Facing
   Interface specified in [I-D.ietf-i2nsf-nsf-facing-interface-dm].

Jeong, et al.           Expires 24 November 2022                [Page 3]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   This document also defines a YANG [RFC7950] data model for the NSF
   monitoring interface, which is derived from the information model for
   the NSF monitoring interface.

   Note that this document covers a subset of monitoring data for
   systems and NSFs, which are related to security.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   This document uses the terminology described in [RFC8329].  In
   addition, the following terms are defined in this document:

   *  I2NSF User: An entity that delivers a high-level security policy
      to the Security Controller and may request monitoring information
      via the NSF data collector.

   *  Monitoring Information: Relevant data that can be processed to
      know the status and performance of the network and the NSF.  The
      monitoring information in an I2NSF environment consists of I2NSF
      Events, I2NSF Records, and I2NSF Counters (see Section 4.1 for the
      detailed definition).  This information is to be delivered to the
      NSF data collector.

   *  Notification: Unsolicited transmission of monitoring information.

   *  NSF Data Collector: An entity that collects NSF monitoring
      information from NSFs, such as Security Controller.

   *  Subscription: An agreement initialized by the NSF data collector
      to receive monitoring information from an NSF.  The method to
      subscribe follows the method by either NETCONF or RESTCONF,
      explained in [RFC5277] and [RFC8650], respectively.

   This document follows the guidelines of [RFC8407], uses the common
   YANG types defined in [RFC6991], and adopts the Network Management
   Datastore Architecture (NMDA) [RFC8342].  The meaning of the symbols
   in tree diagrams is defined in [RFC8340].

Jeong, et al.           Expires 24 November 2022                [Page 4]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

3.  Use Cases for NSF Monitoring Data

   As mentioned earlier, monitoring plays a critical role in an overall
   security framework.  The monitoring of the NSF provides very valuable
   information to an NSF data collector (e.g., Security Controller) in
   maintaining the provisioned security posture.  Besides this, there
   are various other reasons to monitor the NSF as listed below:

   *  The I2NSF User that is the security administrator can configure a
      policy that is triggered on a specific event occurring in the NSF
      or the network [RFC8329]
      [I-D.ietf-i2nsf-consumer-facing-interface-dm].  If an NSF data
      collector (e.g., Security Controller) detects the specified event,
      it can configure additional security functions as defined by
      policies.

   *  The events triggered by an NSF as a result of security policy
      violation can be used by Security Information and Event Management
      (SIEM) to detect any suspicious activity in a larger correlation
      context.

   *  The information (i.e., events, records, and counters) from an NSF
      can be used to build advanced analytics, such as behavior and
      predictive models to improve security posture in large
      deployments.

   *  The NSF data collector can use events from the NSF for achieving
      high availability.  It can take corrective actions such as
      restarting a failed NSF and horizontally scaling up the NSF.

   *  The information (i.e., events, records, and counters) from the NSF
      can aid in the root cause analysis of an operational issue, so it
      can improve debugging.

   *  The records from the NSF can be used to build historical data for
      operation and business reasons.

4.  Classification of NSF Monitoring Data

   In order to maintain a strong security posture, it is not only
   necessary to configure an NSF's security policies but also to
   continuously monitor the NSF by checking acquirable and observable
   data.  This enables security administrators to assess the state of
   the networks in a timely fashion.  It is not possible to block all
   the internal and external threats based on static security posture.
   A more practical approach is supported by enabling dynamic security
   measures, for which continuous visibility is required.  This document
   defines a set of monitoring elements and their scopes that can be

Jeong, et al.           Expires 24 November 2022                [Page 5]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   acquired from an NSF and can be used as NSF monitoring data.  In
   essence, this monitoring data can be leveraged to support constant
   visibility on multiple levels of granularity and can be consumed by
   the corresponding functions.

   Three basic domains of monitoring data originating from a system
   entity [RFC4949], i.e., an NSF, are discussed in this document.

   *  Retention and Emission from NSFs

   *  Notifications for Events and Records

   *  Push and Pull for the retrieval of monitoring data from NSFs

   Every system entity creates information about some context with
   defined I2NSF monitoring data, and so every system entity that
   provides such information can be an I2NSF component.  This
   information is intended to be consumed by other I2NSF components,
   which deals with NSF monitoring data in an automated fashion.

4.1.  Retention and Emission from NSFs

   A system entity (e.g., NSF) first retains I2NSF monitoring data
   inside its own system before emitting the information to another
   I2NSF component (e.g., NSF Data Collector).  The I2NSF monitoring
   information consist of I2NSF Events, I2NSF Records, and I2NSF
   Counters as follows:

   I2NSF Event:  I2NSF Event is defined as an important occurrence at a
      particular time, that is, a change in the system being managed or
      a change in the environment of the system being managed.  An I2NSF
      Event requires immediate attention and should be notified as soon
      as possible.  When used in the context of an (imperative) I2NSF
      Policy Rule, an I2NSF Event is used to determine whether the
      Condition clause of that Policy Rule can be evaluated or not.  The
      Alarm Management Framework in [RFC3877] defines an event as
      something that happens which may be of interest.  Examples of an
      event are a fault, a change in status, crossing a threshold, or an
      external input to the system.  In the I2NSF domain, I2NSF events
      are created following the definition of an event in the Alarm
      Management Framework.

   I2NSF Record:  A record is defined as an item of information that is
      kept to be looked at and used in the future.  Typically, records
      are the information, which is based on operational and
      informational data (i.e., various changes in system
      characteristics).  They are generated by a system entity (e.g.,
      NSF) at particular instants to be kept without any changes

Jeong, et al.           Expires 24 November 2022                [Page 6]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

      afterward.  A set of records has an ordering in time based on when
      they are generated.  Unlike I2NSF Events, records do not require
      immediate attention but may be useful for visibility and
      retroactive cyber forensics.  Records are typically stored in log-
      files or databases on a system entity or NSF.  The examples of
      records include user activities, device performance, and network
      status.  They are important for debugging, auditing, and security
      forensic of a system entity or the network having the system
      entity.

   I2NSF Counter:  An I2NSF Counter is defined as a specific
      representation of an information element whose value changes very
      frequently.  Prominent examples are network interface counters for
      protocol data unit (PDU) amount, byte amount, drop counters, and
      error counters.  Counters are useful in debugging and visibility
      into operational behavior of a system entity (e.g., NSF).  When an
      NSF data collector asks for the value of a counter, a system
      entity MUST update the counter information and emit the latest
      information to the NSF data collector.

   Retention is defined as the storing of monitoring data in NSFs.  The
   retention of I2NSF monitoring information may be affected by the
   importance of the data.  The importance of the data could be context-
   dependent, where it may not just be based on the type of data, but
   may also depend on where it is deployed, e.g., a test lab and
   testbed.  The local policy and configuration will dictate the
   policies and procedures to review, archive, or purge the collected
   monitoring data.

   Emission is defined as the delivery of monitoring data in NSFs to an
   NSF data collector.  The I2NSF monitoring information retained on a
   system entity (e.g., NSF) may be delivered to a corresponding I2NSF
   User via an NSF data collector.  The information consists of the
   aggregated records, typically in the form of log-files or databases.
   For the NSF Monitoring Interface to deliver the information to the
   NSF data collector, the NSF needs to accommodate standardized
   delivery protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040].
   The NSF data collector can forward the information to the I2NSF User
   through standardized delivery protocols (e.g., RESTCONF and NETCONF).
   The interface for the delivery of Monitoring Data from the NSF data
   collector to the I2NSF User is out of the scope of this document.

Jeong, et al.           Expires 24 November 2022                [Page 7]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

4.2.  Notifications for Events and Records

   A specific task of an I2NSF User is to provide I2NSF Policy Rules.
   The rules of a policy are composed of three clauses: Event,
   Condition, and Action clauses.  In consequence, an I2NSF Event is
   specified to trigger the evaluation of the Condition clause of the
   I2NSF Policy Rule.  Such an I2NSF Event is defined as an important
   occurrence at a particular time in the system being managed, and/or
   in the environment of the system being managed whose concept aligns
   well with the generic definition of Event from [RFC3877].

   Another role of the I2NSF Event is to trigger a notification for
   monitoring the status of an NSF.  A notification is defined in
   [RFC3877] as an unsolicited transmission of management information.
   System alarm (called alarm) is defined as a warning related to
   service degradation in system hardware in Section 6.1.  System event
   (called alert) is defined as a warning about any changes of
   configuration, any access violation, information about sessions and
   traffic flows in Section 6.2.  Both an alarm and an alert are I2NSF
   Events that can be delivered as a notification.  The model
   illustrated in this document introduces a complementary type of
   information that can be a conveyed notification.

   In I2NSF monitoring, a notification is used to deliver either an
   event or a record via the I2NSF Monitoring Interface.  The difference
   between the event and record is the timing by which the notifications
   are emitted.  An event is emitted as soon as it happens in order to
   notify an NSF Data Collector of the problem that needs immediate
   attention.  A record is not emitted immediately to the NSF Data
   Collector, and it can be emitted periodically to the NSF Data
   Collector.

   It is important to note that an NSF Data Collector as a consumer
   (i.e., observer) of a notification assesses the importance of the
   notification rather than an NSF as a producer.  The producer can
   include metadata in a notification that supports the observer in
   assessing its importance (e.g., severity).

4.3.  Push and Pull for the retrieval of monitoring data from NSFs

   An important aspect of monitoring information is the freshness of the
   information.  From the perspective of security, it is important to
   notice changes in the current status of the network.  The I2NSF
   Monitoring Interface provides the means of sending monitored
   information from the NSFs to an NSF data collector in a timely
   manner.  Monitoring information can be acquired by a client (i.e.,
   NSF data collector) from a server (i.e., NSF) using push [RFC5277]
   [RFC8641] or pull methods [RFC6241] [RFC8040].

Jeong, et al.           Expires 24 November 2022                [Page 8]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   The pull is a query-based method to obtain information from the NSF.
   In this method, the NSF will remain passive until the information is
   requested from the NSF data collector.  Once a request is accepted
   (with proper authentication), the NSF MUST update the information
   before sending it to the NSF data collector.

   The push is a report-based method to obtain information from the NSF.
   The report-based method ensures the information can be delivered
   immediately without any requests.  This method is used by the NSF to
   actively provide information to the NSF data collector.  To receive
   the information, the NSF data collector subscribes to the NSF for the
   information.

   These acquisition methods are used for different types of monitoring
   information.  The information that has a high level of urgency (i.e.,
   I2NSF Event) should be provided with the push method, while
   information that has a lower level of urgency (i.e., I2NSF Record and
   I2NSF Counter) can be provided with either the pull method or push
   method.

5.  Basic Information Model for Monitoring Data

   As explained in the above section, there is a wealth of data
   available from NSFs that can be monitored.  Firstly, there must be
   some general information with each monitoring message sent from an
   NSF that helps a consumer to identify metadata with that message,
   which are listed as below:

   *  message: The extra detailed description of NSF monitoring data to
      give an NSF data collector the context information as metadata.

   *  vendor-name: The vendor's name of the NSF that generates the
      message.

   *  device-model: The model of the device, can be represented by the
      device model name or serial number.  This field is used to
      identify the model of the device that provides the security
      service.

   *  software-version: The version of the software used to provide the
      security service.

   *  nsf-name: The name or IP address of the NSF generating the
      message.  If the given nsf-name is not an IP address, the name can
      be an arbitrary string including a FQDN (Fully Qualified Domain
      Name).  The name MUST be unique in the scope of management domain
      for a different NSF to identify the NSF that generates the
      message.

Jeong, et al.           Expires 24 November 2022                [Page 9]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  timestamp: The time when the message was generated.  For the
      notification operations (i.e., System Alarms, System Events, NSF
      Events, System Logs, and NSF Logs), this is represented by the
      eventTime of NETCONF event notification [RFC5277] For other
      operations (i.e., System Counter and NSF Counter), the timestamp
      MUST be provided separately.  The time format used is following
      the rules in Section 5.6 of [RFC3339].

   *  language: describes the human language intended for the user, so
      that it allows a user to verify the language that is used in the
      notification (i.e., '../message', '/i2nsf-log/i2nsf-nsf-system-
      access-log/output', and '/i2nsf-log/i2nsf-system-user-activity-
      log/additional-info/cause').  The attribute is encoded following
      the rules in Section 2.1 of [RFC5646].  The default language tag
      is "en-US".

6.  Extended Information Model for Monitoring Data

   The extended information model is the specific monitoring data that
   covers the additional information associated with the detailed
   information of status and performance of the network and the NSF over
   the basic information model.  The extended information combined with
   the basic information creates the monitoring information (i.e., I2NSF
   Event, Record, and Counter).

   The extended monitoring information has settable characteristics for
   data collection as follows:

   *  Acquisition method: The method to obtain the message.  It can be a
      "query" or a "subscription".  A "query" is a request-based method
      to acquire the solicited information.  A "subscription" is a
      report-based method that pushes information to the subscriber.

   *  Emission type: The cause type for the message to be emitted.  This
      attribute is used only when the acquisition method is a
      "subscription" method.  The emission type can be either "on-
      change" or "periodic".  An "on-change" message is emitted when an
      important event happens in the NSF.  A "periodic" message is
      emitted at a certain time interval.  The time to periodically emit
      the message is configurable.

   *  Dampening type: The type of message dampening to stop the rapid
      transmission of messages.  The dampening types are "on-repetition"
      and "no-dampening".  The "on-repetition" type limits the
      transmitted "on-change" message to one message at a certain
      interval (e.g., 100 centiseconds).  This interval is defined as
      dampening-period in [RFC8641].  The dampening-period is
      configurable in the unit of centiseconds.  The "no-dampening" type

Jeong, et al.           Expires 24 November 2022               [Page 10]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

      does not limit the transmission for the messages of the same type.
      In short, "on-repetition" means that the dampening is active and
      "no-dampening" is inactive.  Activating the dampening for an "on-
      change" type of message is RECOMMENDED to reduce the number of
      messages generated.

   Note that the characteristic information is not mandatory to be
   included in a monitoring message.  The information is expected to be
   stored and may or may not be useful in some ways in the future.  In
   any case, the inclusion of the characteristic information is up to
   the implementation.

6.1.  System Alarms

   System alarms have the following characteristics:

   *  acquisition-method: subscription

   *  emission-type: on-change

   *  dampening-type: on-repetition or no-dampening

6.1.1.  Memory Alarm

   The memory is the hardware to store information temporarily or for a
   short period, i.e., Random Access Memory (RAM).  The memory-alarm is
   emitted when the memory usage exceeds the threshold.  The following
   information should be included in a Memory Alarm:

   *  event-name: memory-alarm.

   *  usage: specifies the amount of memory used in percentage.

   *  threshold: The threshold triggering the alarm in percentage.

   *  severity: The severity level of the message.  There are four
      levels, i.e., critical, high, middle, and low.

   *  message: Simple information as a human readable text string such
      as "The memory usage exceeded the threshold" or with extra
      information.

6.1.2.  CPU Alarm

   CPU is the Central Processing Unit that executes basic operations of
   the system.  The cpu-alarm is emitted when the CPU usage exceeds the
   threshold.  The following information should be included in a CPU
   Alarm:

Jeong, et al.           Expires 24 November 2022               [Page 11]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  event-name: cpu-alarm.

   *  usage: Specifies the CPU utilization in percentage.

   *  threshold: The threshold triggering the event in percentage.

   *  severity: The severity level of the message.  There are four
      levels, i.e., critical, high, middle, and low.

   *  message: Simple information as a human readable text string such
      as "The CPU usage exceeded the threshold" or with extra
      information.

6.1.3.  Disk (Storage) Alarm

   Disk or storage is the hardware to store information for a long time,
   i.e., Hard Disk or Solid-State Drive.  The disk-alarm is emitted when
   the Disk usage exceeds the threshold.  The following information
   should be included in a Disk Alarm:

   *  event-name: disk-alarm.

   *  usage: Specifies the ratio of the used disk space to the whole
      disk space in terms of percentage.

   *  threshold: The threshold triggering the event in percentage.

   *  severity: The severity level of the message.  There are four
      levels, i.e., critical, high, middle, and low.

   *  message: Simple information as a human readable text string such
      as "The disk usage exceeded the threshold" or with extra
      information.

6.1.4.  Hardware Alarm

   The hardware-alarm is emitted when a hardware, e.g., CPU, memory,
   disk, or interface, problem is detected.  The following information
   should be included in a Hardware Alarm:

   *  event-name: hardware-alarm.

   *  component-name: It indicates the hardware component responsible
      for generating this alarm.

   *  severity: The severity level of the message.  There are four
      levels, i.e., critical, high, middle, and low.

Jeong, et al.           Expires 24 November 2022               [Page 12]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  message: Simple information as a human readable text string such
      as "The hardware component has failed or degraded" or with extra
      information.

6.1.5.  Interface Alarm

   Interface is the network interface for connecting a device with the
   network.  The interface-alarm is emitted when the state of the
   interface is changed.  The following information should be included
   in an Interface Alarm:

   *  event-name: interface-alarm.

   *  interface-name: The name of the interface.

   *  interface-state: The status of the interface, i.e., down, up (not
      congested), congested (up but congested), testing, unknown,
      dormant, not-present, and lower-layer-down.

   *  severity: The severity level of the message.  There are four
      levels, i.e., critical, high, middle, and low.

   *  message: Simple information as a human readable text string such
      as "The interface is 'interface-state'" or with extra information.

6.2.  System Events

   System events (as alerts) have the following characteristics:

   *  acquisition-method: subscription

   *  emission-type: on-change

   *  dampening-type: on-repetition or no-dampening

6.2.1.  Access Violation

   The access-violation system event is an event when a user tries to
   access (read, write, create, or delete) any information or execute
   commands above their privilege.  The following information should be
   included in this event:

   *  event-name: access-violation.

   *  identity: The information to identify the attempted access
      violation.  The minimum information (extensible) that should be
      included:

Jeong, et al.           Expires 24 November 2022               [Page 13]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

      1.  user: The unique username that attempted access violation.

      2.  group: Group(s) to which a user belongs.  A user can belong to
          multiple groups.

      3.  ip-address: The IP address of the user that triggered the
          event.

      4.  l4-port-number: The transport layer port number used by the
          user.

   *  authentication: The method to verify the valid user, i.e., pre-
      configured-key and certificate-authority.

   *  message: The message as a human readable text string to give the
      context of the event, such as "Access is denied".

6.2.2.  Configuration Change

   A configuration change is a system event when a new configuration is
   added or an existing configuration is modified.  The following
   information should be included in this event:

   *  event-name: configuration-change.

   *  identity: The information to identify the user that updated the
      configuration.  The minimum information (extensible) that should
      be included:

      1.  user: The unique username that changes the configuration.

      2.  group: Group(s) to which a user belongs.  A user can belong to
          multiple groups.

      3.  ip-address: The IP address of the user that triggered the
          event.

      4.  l4-port-number: The transport layer port number used by the
          user.

   *  authentication: The method to verify the valid user, i.e., pre-
      configured-key and certificate-authority.

   *  message: The message as a human readable text string to give the
      context of the event, such as "Configuration is modified", "New
      configuration is added", or "A configuration has been removed".

Jeong, et al.           Expires 24 November 2022               [Page 14]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  changes: Describes the modification that was made to the
      configuration.  The minimum information that must be provided is
      the name of the policy that has been altered (added, modified, or
      removed).  Other detailed information about the configuration
      changes is up to the implementation.

6.2.3.  Session Table Event

   A session is defined as a connection (i.e., traffic flow) of a data
   plane (e.g., TCP, UDP, and SCTP).  Session Table Event is the event
   triggered by the session table of an NSF.  A session table holds the
   information of the currently active sessions.  The following
   information should be included in a Session Table Event:

   *  event-name: detection-session-table.

   *  current-session: The number of concurrent sessions.

   *  maximum-session: The maximum number of sessions that the session
      table can support.

   *  threshold: The threshold (in terms of an allowed number of
      sessions) triggering the event.

   *  message: The message as a human readable text string to give the
      context of the event, such as "The number of sessions exceeded the
      table threshold".

6.2.4.  Traffic Flows

   Traffic flows need to be monitored because they might be used for
   security attacks to the network.  The following information should be
   included in this event:

   *  event-name: traffic-flows.

   *  interface-name: The mnemonic name of the network interface

   *  interface-type: The type of a network interface such as an ingress
      or egress interface.

   *  src-mac: The source MAC address of the traffic flow.  This
      information may or may not be included depending on the type of
      traffic flow.  For example, the information will be useful and
      should be included if the traffic flows are traffic flows of Link
      Layer Discovery Protocol (LLDP) [IEEE-802.1AB], Address Resolution
      Protocol (ARP) for IPv4 [RFC0826], and Neighbor Discovery Protocol
      (ND) for IPv6 [RFC4861].

Jeong, et al.           Expires 24 November 2022               [Page 15]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  dst-mac: The destination MAC address of the traffic flow.  This
      information may or may not be included depending on the type of
      traffic flow.  For example, the information will be useful and
      should be included if the traffic flows are LLDP, ARP for IPv4, or
      ND for IPv6 traffic flows.

   *  src-ip: The source IPv4 or IPv6 address of the traffic flow.

   *  dst-ip: The destination IPv4 or IPv6 address of the traffic flow.

   *  src-port: The transport layer source port number of the traffic
      flow.

   *  dst-port: The transport layer destination port number of the
      traffic flow.

   *  protocol: The protocol of the traffic flow.

   *  measurement-time: The duration of the measurement in seconds for
      the arrival rate and arrival throughput of packets of a traffic
      flow.  These two metrics (i.e., arrival rate and arrival
      throughput) are measured over the past measurement duration before
      now.

   *  arrival-rate: Arrival rate of packets of the traffic flow in
      packets per second measured over the past "measurement-time".

   *  arrival-throughput: Arrival rate of packets of the traffic flow in
      bytes per second measured over the past "measurement-time".

   Note that the NSF Monitoring Interface data model is focused on a
   generic method to collect the monitoring information of systems and
   NSFs including traffic flows related to security attacks and system
   resource usages.  On the other hand, IPFIX [RFC7011] is a standard
   method to collect general information on traffic flows rather than
   security.

6.3.  NSF Events

   The NSF events provide the event that is detected by a specific NSF
   that supported a certain capability.  This section only discusses the
   monitoring data for the advanced NSFs discussed in
   [I-D.ietf-i2nsf-capability-data-model].  The NSF events information
   can be extended to support other types of NSF.  NSF events have the
   following characteristics:

   *  acquisition-method: subscription

Jeong, et al.           Expires 24 November 2022               [Page 16]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  emission-type: on-change

   *  dampening-type: on-repetition or no-dampening

6.3.1.  DDoS Detection

   The following information should be included in a Denial-of-Service
   (DoS) or Distributed Denial-of-Service (DDoS) Event:

   *  event-name: detection-ddos.

   *  attack-type: The type of DoS or DDoS Attack, i.e., SYN flood, ACK
      flood, SYN-ACK flood, FIN/RST flood, TCP Connection flood, UDP
      flood, ICMP flood, HTTPS flood, HTTP flood, DNS query flood, DNS
      reply flood, SIP flood, TLS flood, and NTP amplification flood.
      This can be extended with additional types of DoS or DDoS attack.

   *  attack-src-ip: The IP addresses of the source of the DDoS attack.
      Note that not all IP addresses should be included but only limited
      IP addresses are included to conserve the server resources.  The
      listed attacking IP addresses can be an arbitrary sampling of the
      "top talkers", i.e., the attackers that send the highest amount of
      traffic.

   *  attack-dst-ip: The destination IPv4 or IPv6 addresses of attack
      traffic.  It can hold multiple IPv4 or IPv6 addresses.

   *  attack-src-port: The transport layer source port numbers of the
      attack traffic.  Note that not all ports will have been seen on
      all the corresponding source IP addresses.

   *  attack-dst-port: The transport layer destination port numbers that
      the attack traffic aims at.  Note that not all ports will have
      been seen on all the corresponding destination IP addresses.

   *  start-time: The time stamp indicating when the attack started.
      The time format used is following the rules in Section 5.6 of
      [RFC3339].

   *  end-time: The time stamp indicating when the attack ended.  If the
      attack is still ongoing when sending out the notification, this
      field can be empty.  The time format used is following the rules
      in Section 5.6 of [RFC3339].

   *  attack-rate: The packets per second of attack traffic.

   *  attack-throughput: The bytes per second of attack traffic.

Jeong, et al.           Expires 24 November 2022               [Page 17]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  rule-name: The name of the I2NSF Policy Rule being triggered.
      Note that rule-name is used to match a detected NSF event with a
      policy rule in [I-D.ietf-i2nsf-nsf-facing-interface-dm].

6.3.2.  Virus Event

   This information is used when a virus is detected within a traffic
   flow or inside a host.  Note that "malware" is a more generic word
   for malicious software, including virus and worm.  In the document,
   "virus" is used to represent "malware" such that they are
   interchangeable.  The following information should be included in a
   Virus Event:

   *  event-name: detection-virus.

   *  virus-name: Name of the virus.

   *  virus-type: Type of the virus. e.g., trojan, worm, and macro
      virus.

   *  The following information is used only when the virus is detected
      within the traffic flow and not yet attacking the host:

      -  dst-ip: The destination IP address of the flow where the virus
         is found.

      -  src-ip: The source IP address of the flow where the virus is
         found.

      -  src-port: The source port of the flow where the virus is found.

      -  dst-port: The destination port of the flow where the virus is
         found.

   *  The following information is used only when the virus is detected
      within a host system:

      -  host: The name or IP address of the host/device that is
         infected by the virus.  If the given name is not an IP address,
         the name can be an arbitrary string including a FQDN (Fully
         Qualified Domain Name).  The name MUST be unique in the scope
         of management domain for identifying the device that has been
         infected with a virus.

      -  os: The operating system of the host that has the virus.

      -  file-type: The type of file (indicated by the file's suffix,
         e.g., .exe) virus code is found in (if applicable).

Jeong, et al.           Expires 24 November 2022               [Page 18]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

      -  file-name: The name of the file where the virus is hidden.

   *  rule-name: The name of the rule being triggered.

   Note "host" is used only when the virus is detected within a host
   itself.  Thus, the traffic flow information such as the source and
   destination IP addresses is not important, so the elements of the
   traffic flow (i.e., dst-ip, src-ip, src-port, and dst-port) are not
   specified above.  On the other hand, when the virus is detected
   within a traffic flow and not yet attacking a host, the element of
   "host" is not specified above.

6.3.3.  Intrusion Event

   The following information should be included in an Intrusion Event:

   *  event-name: detection-intrusion.

   *  attack-type: Attack type, e.g., brutal force or buffer overflow.

   *  src-ip: The source IP address of the flow.

   *  dst-ip: The destination IP address of the flow.

   *  src-port: The source port number of the flow.

   *  dst-port: The destination port number of the flow

   *  protocol: The employed transport layer protocol. e.g., TCP or UDP.
      Note that QUIC protocol [RFC9000] is excluded in the data model as
      it is not considered in the initial I2NSF documents [RFC8329].
      The QUIC traffic should not be treated as generic UDP traffic and
      will be considered in the future I2NSF documents.

   *  app: The employed application layer protocol. e.g., HTTP or FTP.

   *  rule-name: The name of the I2NSF Policy Rule being triggered.

6.3.4.  Web Attack Event

   The following information should be included in a Web Attack Alarm:

   *  event-name: detection-web-attack.

   *  attack-type: Concrete web attack type. e.g., SQL injection,
      command injection, XSS, or CSRF.

   *  src-ip: The source IP address of the packet.

Jeong, et al.           Expires 24 November 2022               [Page 19]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  dst-ip: The destination IP address of the packet.

   *  src-port: The source port number of the packet.

   *  dst-port: The destination port number of the packet.

   *  req-method: The HTTP method of the request.  For instance, "PUT"
      and "GET" in HTTP.

   *  req-target: The HTTP Request Target.

   *  response-code: The HTTP Response status code.

   *  cookies: The HTTP Cookie header field of the request from the user
      agent.  Note that though cookies have many historical infelicities
      that degrade security and privacy, the Cookie and Set-Cookie
      header fields are widely used on the Internet [RFC6265].  Thus,
      the cookies information needs to be kept confidential and is NOT
      RECOMMENDED to be included in the monitoring data unless the
      information is absolutely necessary to help to enhance the
      security of the network.

   *  req-host: The HTTP Host header field of the request.

   *  filtering-type: URL filtering type. e.g., deny-list, allow-list,
      and unknown.

   *  rule-name: The name of the I2NSF Policy Rule being triggered.

6.3.5.  VoIP/VoCN Event

   The following information should be included in a VoIP (Voice over
   Internet Protocol) and VoCN (Voice over Cellular Network, such as
   Voice over LTE or 5G) Event:

   *  event-name: detection-voip-vocn

   *  source-voice-id: The detected source voice Call ID for VoIP and
      VoCN that violates the policy.

   *  destination-voice-id: The destination voice Call ID for VoIP and
      VoCN that violates the policy.

   *  user-agent: The user agent for VoIP and VoCN that violates the
      policy.

   *  src-ip: The source IP address of the VoIP/VoCN.

Jeong, et al.           Expires 24 November 2022               [Page 20]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  dst-ip: The destination IP address of the VoIP/VoCN.

   *  src-port: The source port number of the VoIP/VoCN.

   *  dst-port: The destination port number of VoIP/VoCN.

   *  rule-name: The name of the I2NSF Policy Rule being triggered.

6.4.  System Logs

   System log is a record that is used to monitor the activity of the
   user on the NSF and the status of the NSF.  System logs have the
   following characteristics:

   *  acquisition-method: subscription or query

   *  emission-type: on-change or periodic

   *  dampening-type: on-repetition or no-dampening

6.4.1.  Access Log

   Access logs record administrators' login, logout, and operations on a
   device.  By analyzing them, some security vulnerabilities can be
   identified.  The following information should be included in an
   operation report:

   *  identity: The information to identify the user.  The minimum
      information (extensible) that should be included:

      1.  user: The unique username that attempted access violation.

      2.  group: Group(s) to which a user belongs.  A user can belong to
          multiple groups.

      3.  ip-address: The IP address of the user that triggered the
          event.

      4.  l4-port-number: The transport layer port number used by the
          user.

   *  authentication: The method to verify the valid user, i.e., pre-
      configured-key and certificate-authority.

   *  operation-type: The operation type that the administrator
      executed, e.g., login, logout, configuration, and other.

Jeong, et al.           Expires 24 November 2022               [Page 21]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  input: The operation performed by a user after login.  The
      operation is a command given by a user.

   *  output: The result after executing the input.

6.4.2.  Resource Utilization Log

   Running reports record the device system's running status, which is
   useful for device monitoring.  The following information should be
   included in running report:

   *  system-status: The current system's running status.

   *  cpu-usage: Specifies the aggregated CPU usage in percentage.

   *  memory-usage: Specifies the memory usage in percentage.

   *  disk-id: Specifies the disk ID to identify the storage disk.

   *  disk-usage: Specifies the disk usage of disk-id in percentage.

   *  disk-space-left: Specifies the available disk space left of disk-
      id in percentage.

   *  session-number: Specifies total concurrent sessions.

   *  process-number: Specifies total number of systems processes.

   *  interface-id: Specifies the interface ID to identify the network
      interface.

   *  in-traffic-rate: The total inbound data plane traffic rate in
      packets per second.

   *  out-traffic-rate: The total outbound data plane traffic rate in
      packets per second.

   *  in-traffic-throughput: The total inbound data plane traffic
      throughput in bytes per second.

   *  out-traffic-throughput: The total outbound data plane traffic
      throughput in bytes per second.

   Note that "traffic" includes only the data plane since the monitoring
   interface focuses on the monitoring of traffic flows for
   applications, rather than the control plane.  In the document,
   "packet" includes a layer-2 frame, so "packet" and "frame" are
   interchangeable.  Also, note that system resources (e.g., CPU,

Jeong, et al.           Expires 24 November 2022               [Page 22]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   memory, disk, and interface) are monitored for the sake of security
   in NSFs even though they are common ones to be monitored by a generic
   Operations, Administration and Maintenance (OAM) protocol (or
   module).

6.4.3.  User Activity Log

   User activity logs provide visibility into users' online records
   (such as login time, online/lockout duration, and login IP addresses)
   and the actions that users perform.  User activity reports are
   helpful to identify exceptions during a user's login and network
   access activities.  This information should be included in a user's
   activity report:

   *  identity: The information to identify the user.  The minimum
      information (extensible) that should be included is as follows:

      1.  user: The unique username that attempted access violation.

      2.  group: Group(s) to which a user belongs.  A user can belong to
          multiple groups.

      3.  ip-address: The IP address of the user that triggered the
          event.

      4.  l4-port-number: The transport layer port number used by the
          user.

   *  authentication: The method to verify the valid user, i.e., pre-
      configured-key and certificate-authority.

   *  online-duration: The duration of a user's activeness (stays in
      login) during a session.

   *  logout-duration: The duration of a user's inactiveness (not in
      login) from the last session.

   *  additional-info: Additional Information for login:

      1.  type: User activities. e.g., Successful User Login, Failed
          Login attempts, User Logout, Successful User Password Change,
          Failed User Password Change, User Lockout, and User Unlocking.

      2.  cause: Cause of a failed user activity.

Jeong, et al.           Expires 24 November 2022               [Page 23]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

6.5.  NSF Logs

   NSF logs have the folowing characteristics:

   *  acquisition-method: subscription or query

   *  emission-type: on-change

   *  dampening-type: on-repetition or no-dampening

6.5.1.  Deep Packet Inspection Log

   Deep Packet Inspection (DPI) Logs provide statistics of transit
   traffic at an NSF such that the traffic includes uploaded and
   downloaded files/data, sent/received emails, and blocking/alert
   records on websites.  It is helpful to learn risky user behaviors and
   why access to some URLs is blocked or allowed with an alert record.

   *  attack-type: DPI action types. e.g., File Blocking, Data
      Filtering, and Application Behavior Control.

   *  src-ip: The source IP address of the flow.

   *  dst-ip: The destination IP address of the flow.

   *  src-port: The source port number of the flow.

   *  dst-port: The destination port number of the flow

   *  rule-name: The name of the I2NSF Policy Rule being triggered.

   *  action: Action defined in the file blocking rule, data filtering
      rule, or application behavior control rule that traffic matches.

6.6.  System Counter

   System counter has the following characteristics:

   *  acquisition-method: subscription or query

   *  emission-type: periodic

   *  dampening-type: no-dampening

6.6.1.  Interface Counter

   Interface counters provide visibility into traffic into and out of an
   NSF, and bandwidth usage.

Jeong, et al.           Expires 24 November 2022               [Page 24]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  interface-name: Network interface name configured in NSF.

   *  protocol: The type of network protocol (e.g., IPv4, IPv6, TCP, and
      UDP).  If this field is empty, then the counter is used for all
      protocols.

   *  measurement-time: The duration of the measurement in seconds for
      the calculation of statistics such as traffic rate and throughput.
      The statistic attributes are measured over the past measurement
      duration before now.

   *  in-total-traffic-pkts: Total inbound packets.

   *  out-total-traffic-pkts: Total outbound packets.

   *  in-total-traffic-bytes: Total inbound bytes.

   *  out-total-traffic-bytes: Total outbound bytes.

   *  in-drop-traffic-pkts: Total inbound drop packets caused by a
      policy or hardware/resource error.

   *  out-drop-traffic-pkts: Total outbound drop packets caused by a
      policy or hardware/resource error.

   *  in-drop-traffic-bytes: Total inbound drop bytes caused by a policy
      or hardware/resource error.

   *  out-drop-traffic-bytes: Total outbound drop bytes caused by a
      policy or hardware/resource error.

   *  total-traffic: The total number of traffic packets (in and out) in
      the NSF.

   *  in-traffic-average-rate: Inbound traffic average rate in packets
      per second.

   *  in-traffic-peak-rate: Inbound traffic peak rate in packets per
      second.

   *  in-traffic-average-throughput: Inbound traffic average throughput
      in bytes per second.

   *  in-traffic-peak-throughput: Inbound traffic peak throughput in
      bytes per second.

   *  out-traffic-average-rate: Outbound traffic average rate in packets
      per second.

Jeong, et al.           Expires 24 November 2022               [Page 25]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  out-traffic-peak-rate: Outbound traffic peak rate in packets per
      second.

   *  out-traffic-average-throughput: Outbound traffic average
      throughput in bytes per second.

   *  out-traffic-peak-throughput: Outbound traffic peak throughput in
      bytes per second.

   *  discontinuity-time: The time of the most recent occasion at which
      any one or more of the counters suffered a discontinuity.  If no
      such discontinuities have occurred since the last re-
      initialization of the local management subsystem, then this node
      contains the time the local management subsystem was re-
      initialized.  The time format used is following the rules in
      Section 5.6 of [RFC3339].

6.7.  NSF Counters

   NSF counters have the following characteristics:

   *  acquisition-method: subscription or query

   *  emission-type: periodic

   *  dampening-type: no-dampening

6.7.1.  Firewall Counter

   Firewall counters provide visibility into traffic signatures and
   bandwidth usage that correspond to the policy that is configured in a
   firewall.

   *  policy-name: Security policy name that traffic matches.

   *  measurement-time: The duration of the measurement in seconds for
      the calculation of statistics such as traffic rate and throughput.
      The statistic attributes are measured over the past measurement
      duration before now.

   *  in-interface: Inbound interface of traffic.

   *  out-interface: Outbound interface of traffic.

   *  total-traffic: The total number of traffic packets (in and out) in
      the firewall.

Jeong, et al.           Expires 24 November 2022               [Page 26]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  in-traffic-average-rate: Inbound traffic average rate in packets
      per second.

   *  in-traffic-peak-rate: Inbound traffic peak rate in packets per
      second.

   *  in-traffic-average-throughput: Inbound traffic average throughput
      in bytes per second.

   *  in-traffic-peak-throughput: Inbound traffic peak throughput in
      bytes per second.

   *  out-traffic-average-rate: Outbound traffic average rate in packets
      per second.

   *  out-traffic-peak-rate: Outbound traffic peak rate in packets per
      second.

   *  out-traffic-average-throughput: Outbound traffic average
      throughput in bytes per second.

   *  out-traffic-peak-throughput: Outbound traffic peak throughput in
      bytes per second.

   *  discontinuity-time: The time on the most recent occasion at which
      any one or more of the counters suffered a discontinuity.  If no
      such discontinuities have occurred since the last re-
      initialization of the local management subsystem, then this node
      contains the time the local management subsystem was re-
      initialized.  The time format used is following the rules in
      Section 5.6 of [RFC3339].

6.7.2.  Policy Hit Counter

   Policy hit counters record the security policy that traffic matches
   and its hit count.  That is, when a packet actually matches a policy,
   it should be added to the statistics of a "policy hit counter" of the
   policy.  The "policy hit counter" provides the "policy-name" that
   matches the policy's name in the NSF-Facing Interface YANG data model
   [I-D.ietf-i2nsf-nsf-facing-interface-dm].  It can check if policy
   configurations are correct or not.

   *  policy-name: Security policy name that traffic matches.

   *  hit-times: The number of times that the security policy matches
      the specified traffic.

Jeong, et al.           Expires 24 November 2022               [Page 27]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   *  discontinuity-time: The time on the most recent occasion at which
      any one or more of the counters suffered a discontinuity.  If no
      such discontinuities have occurred since the last re-
      initialization of the local management subsystem, then this node
      contains the time the local management subsystem was re-
      initialized.  The time format used is following the rules in
      Section 5.6 of [RFC3339].

7.  YANG Tree Structure of NSF Monitoring YANG Module

   The tree structure of the NSF monitoring YANG module is provided
   below:

   module: ietf-i2nsf-monitoring-interface
     +--ro i2nsf-counters
     |  +--ro vendor-name?          string
     |  +--ro device-model?         string
     |  +--ro software-version?     string
     |  +--ro nsf-name              union
     |  +--ro timestamp?            yang:date-and-time
     |  +--ro acquisition-method?   identityref
     |  +--ro emission-type?        identityref
     |  +--ro system-interface* [interface-name]
     |  |  +--ro interface-name                    if:interface-ref
     |  |  +--ro protocol?                         identityref
     |  |  +--ro in-total-traffic-pkts?            yang:counter64
     |  |  +--ro out-total-traffic-pkts?           yang:counter64
     |  |  +--ro in-total-traffic-bytes?           uint64
     |  |  +--ro out-total-traffic-bytes?          uint64
     |  |  +--ro in-drop-traffic-pkts?             yang:counter64
     |  |  +--ro out-drop-traffic-pkts?            yang:counter64
     |  |  +--ro in-drop-traffic-bytes?            uint64
     |  |  +--ro out-drop-traffic-bytes?           uint64
     |  |  +--ro discontinuity-time                yang:date-and-time
     |  |  +--ro measurement-time?                 uint32
     |  |  +--ro total-traffic?                    yang:counter64
     |  |  +--ro in-traffic-average-rate?          uint64
     |  |  +--ro in-traffic-peak-rate?             uint64
     |  |  +--ro in-traffic-average-throughput?    uint64
     |  |  +--ro in-traffic-peak-throughput?       uint64
     |  |  +--ro out-traffic-average-rate?         uint64
     |  |  +--ro out-traffic-peak-rate?            uint64
     |  |  +--ro out-traffic-average-throughput?   uint64
     |  |  +--ro out-traffic-peak-throughput?      uint64
     |  +--ro nsf-firewall* [policy-name]
     |  |  +--ro in-interface?                     if:interface-ref
     |  |  +--ro out-interface?                    if:interface-ref
     |  |  +--ro policy-name     -> /i2nsfnfi:i2nsf-security-policy/name

Jeong, et al.           Expires 24 November 2022               [Page 28]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

     |  |  +--ro discontinuity-time                yang:date-and-time
     |  |  +--ro measurement-time?                 uint32
     |  |  +--ro total-traffic?                    yang:counter64
     |  |  +--ro in-traffic-average-rate?          uint64
     |  |  +--ro in-traffic-peak-rate?             uint64
     |  |  +--ro in-traffic-average-throughput?    uint64
     |  |  +--ro in-traffic-peak-throughput?       uint64
     |  |  +--ro out-traffic-average-rate?         uint64
     |  |  +--ro out-traffic-peak-rate?            uint64
     |  |  +--ro out-traffic-average-throughput?   uint64
     |  |  +--ro out-traffic-peak-throughput?      uint64
     |  +--ro nsf-policy-hits* [policy-name]
     |     +--ro policy-name     -> /i2nsfnfi:i2nsf-security-policy/name
     |     +--ro discontinuity-time    yang:date-and-time
     |     +--ro hit-times?            yang:counter64
     +--rw i2nsf-monitoring-configuration
        +--rw i2nsf-system-detection-alarm
        |  +--rw enabled?        boolean
        |  +--rw system-alarm* [alarm-type]
        |     +--rw alarm-type          enumeration
        |     +--rw threshold?          uint8
        |     +--rw dampening-period?   centiseconds
        +--rw i2nsf-system-detection-event
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-traffic-flows
        |  +--rw dampening-period?   centiseconds
        |  +--rw enabled?            boolean
        +--rw i2nsf-nsf-detection-ddos {i2nsf-nsf-detection-ddos}?
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-nsf-detection-virus {i2nsf-nsf-detection-virus}?
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-nsf-detection-session-table
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-nsf-detection-intrusion
                                        {i2nsf-nsf-detection-intrusion}?
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-nsf-detection-web-attack
                                       {i2nsf-nsf-detection-web-attack}?
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-nsf-detection-voip-vocn
                                        {i2nsf-nsf-detection-voip-vocn}?
        |  +--rw enabled?            boolean

Jeong, et al.           Expires 24 November 2022               [Page 29]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-nsf-system-access-log
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-system-res-util-log
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-system-user-activity-log
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-nsf-log-dpi {i2nsf-nsf-log-dpi}?
        |  +--rw enabled?            boolean
        |  +--rw dampening-period?   centiseconds
        +--rw i2nsf-counter
           +--rw period?   uint16

     notifications:
       +---n i2nsf-event
       |  +--ro vendor-name?                               string
       |  +--ro device-model?                              string
       |  +--ro software-version?                          string
       |  +--ro nsf-name                                   union
       |  +--ro message?                                   string
       |  +--ro language?                                  string
       |  +--ro acquisition-method?                        identityref
       |  +--ro emission-type?                             identityref
       |  +--ro dampening-type?                            identityref
       |  +--ro (sub-event-type)?
       |     +--:(i2nsf-system-detection-alarm)
       |     |  +--ro i2nsf-system-detection-alarm
       |     |     +--ro alarm-category?    identityref
       |     |     +--ro component-name?    string
       |     |     +--ro interface-name?    if:interface-ref
       |     |     +--ro interface-state?   enumeration
       |     |     +--ro severity?          severity
       |     |     +--ro usage?             uint8
       |     |     +--ro threshold?         uint8
       |     +--:(i2nsf-system-detection-event)
       |     |  +--ro i2nsf-system-detection-event
       |     |     +--ro event-category?   identityref
       |     |     +--ro user              string
       |     |     +--ro group*            string
       |     |     +--ro ip-address        inet:ip-address-no-zone
       |     |     +--ro l4-port-number    inet:port-number
       |     |     +--ro authentication?   identityref
       |     |     +--ro changes* [policy-name]
       |     |        +--ro policy-name
                                 -> /i2nsfnfi:i2nsf-security-policy/name

Jeong, et al.           Expires 24 November 2022               [Page 30]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       |     +--:(i2nsf-traffic-flows)
       |     |  +--ro i2nsf-traffic-flows
       |     |     +--ro interface-name?       if:interface-ref
       |     |     +--ro interface-type?       enumeration
       |     |     +--ro src-mac?              yang:mac-address
       |     |     +--ro dst-mac?              yang:mac-address
       |     |     +--ro src-ip?               inet:ip-address-no-zone
       |     |     +--ro dst-ip?               inet:ip-address-no-zone
       |     |     +--ro protocol?             identityref
       |     |     +--ro src-port?             inet:port-number
       |     |     +--ro dst-port?             inet:port-number
       |     |     +--ro measurement-time?     uint32
       |     |     +--ro arrival-rate?         uint64
       |     |     +--ro arrival-throughput?   uint64
       |     +--:(i2nsf-nsf-detection-session-table)
       |        +--ro i2nsf-nsf-detection-session-table
       |           +--ro current-session?   uint32
       |           +--ro maximum-session?   uint32
       |           +--ro threshold?         uint32
       +---n i2nsf-log
       |  +--ro vendor-name?                            string
       |  +--ro device-model?                           string
       |  +--ro software-version?                       string
       |  +--ro nsf-name                                union
       |  +--ro message?                                string
       |  +--ro language?                               string
       |  +--ro acquisition-method?                     identityref
       |  +--ro emission-type?                          identityref
       |  +--ro dampening-type?                         identityref
       |  +--ro (sub-logs-type)?
       |     +--:(i2nsf-nsf-system-access-log)
       |     |  +--ro i2nsf-nsf-system-access-log
       |     |     +--ro user              string
       |     |     +--ro group*            string
       |     |     +--ro ip-address        inet:ip-address-no-zone
       |     |     +--ro l4-port-number    inet:port-number
       |     |     +--ro authentication?   identityref
       |     |     +--ro operation-type?   operation-type
       |     |     +--ro input?            string
       |     |     +--ro output?           string
       |     +--:(i2nsf-system-res-util-log)
       |     |  +--ro i2nsf-system-res-util-log
       |     |     +--ro system-status?   enumeration
       |     |     +--ro cpu-usage?       uint8
       |     |     +--ro memory-usage?    uint8
       |     |     +--ro disks* [disk-id]
       |     |     |  +--ro disk-id            string
       |     |     |  +--ro disk-usage?        uint8

Jeong, et al.           Expires 24 November 2022               [Page 31]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       |     |     |  +--ro disk-space-left?   uint8
       |     |     +--ro session-num?     uint32
       |     |     +--ro process-num?     uint32
       |     |     +--ro interface* [interface-id]
       |     |        +--ro interface-id              string
       |     |        +--ro in-traffic-rate?          uint64
       |     |        +--ro out-traffic-rate?         uint64
       |     |        +--ro in-traffic-throughput?    uint64
       |     |        +--ro out-traffic-throughput?   uint64
       |     +--:(i2nsf-system-user-activity-log)
       |     |  +--ro i2nsf-system-user-activity-log
       |     |     +--ro user               string
       |     |     +--ro group*             string
       |     |     +--ro ip-address         inet:ip-address-no-zone
       |     |     +--ro l4-port-number     inet:port-number
       |     |     +--ro authentication?    identityref
       |     |     +--ro online-duration?   uint32
       |     |     +--ro logout-duration?   uint32
       |     |     +--ro additional-info
       |     |        +--ro type?    enumeration
       |     |        +--ro cause?   string
       |     +--:(i2nsf-nsf-log-dpi) {i2nsf-nsf-log-dpi}?
       |        +--ro i2nsf-nsf-log-dpi
       |           +--ro attack-type?   identityref
       |           +--ro src-ip?        inet:ip-address-no-zone
       |           +--ro src-port?      inet:port-number
       |           +--ro dst-ip?        inet:ip-address-no-zone
       |           +--ro dst-port?      inet:port-number
       |           +--ro rule-name
                           -> /i2nsfnfi:i2nsf-security-policy/rules/name
       |           +--ro action*        identityref
       +---n i2nsf-nsf-event
          +--ro vendor-name?                            string
          +--ro device-model?                           string
          +--ro software-version?                       string
          +--ro nsf-name                                union
          +--ro message?                                string
          +--ro language?                               string
          +--ro acquisition-method?                     identityref
          +--ro emission-type?                          identityref
          +--ro dampening-type?                         identityref
          +--ro (sub-event-type)?
             +--:(i2nsf-nsf-detection-ddos) {i2nsf-nsf-detection-ddos}?
             |  +--ro i2nsf-nsf-detection-ddos
             |     +--ro attack-type?         identityref
             |     +--ro start-time           yang:date-and-time
             |     +--ro end-time?            yang:date-and-time
             |     +--ro attack-src-ip*       inet:ip-address-no-zone

Jeong, et al.           Expires 24 November 2022               [Page 32]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

             |     +--ro attack-dst-ip*       inet:ip-address-no-zone
             |     +--ro attack-src-port*     inet:port-number
             |     +--ro attack-dst-port*     inet:port-number
             |     +--ro rule-name
                           -> /i2nsfnfi:i2nsf-security-policy/rules/name
             |     +--ro attack-rate?         uint64
             |     +--ro attack-throughput?   uint64
             +--:(i2nsf-nsf-detection-virus)
                                            {i2nsf-nsf-detection-virus}?
             |  +--ro i2nsf-nsf-detection-virus
             |     +--ro src-ip?       inet:ip-address-no-zone
             |     +--ro src-port?     inet:port-number
             |     +--ro dst-ip?       inet:ip-address-no-zone
             |     +--ro dst-port?     inet:port-number
             |     +--ro rule-name
                           -> /i2nsfnfi:i2nsf-security-policy/rules/name
             |     +--ro virus-name?   string
             |     +--ro virus-type?   identityref
             |     +--ro host?         union
             |     +--ro file-type?    string
             |     +--ro file-name?    string
             |     +--ro os?           string
             +--:(i2nsf-nsf-detection-intrusion)
                                        {i2nsf-nsf-detection-intrusion}?
             |  +--ro i2nsf-nsf-detection-intrusion
             |     +--ro src-ip?        inet:ip-address-no-zone
             |     +--ro src-port?      inet:port-number
             |     +--ro dst-ip?        inet:ip-address-no-zone
             |     +--ro dst-port?      inet:port-number
             |     +--ro rule-name
                           -> /i2nsfnfi:i2nsf-security-policy/rules/name
             |     +--ro protocol?      identityref
             |     +--ro app?           identityref
             |     +--ro attack-type?   identityref
             +--:(i2nsf-nsf-detection-web-attack)
                                       {i2nsf-nsf-detection-web-attack}?
             |  +--ro i2nsf-nsf-detection-web-attack
             |     +--ro src-ip?           inet:ip-address-no-zone
             |     +--ro src-port?         inet:port-number
             |     +--ro dst-ip?           inet:ip-address-no-zone
             |     +--ro dst-port?         inet:port-number
             |     +--ro rule-name
                           -> /i2nsfnfi:i2nsf-security-policy/rules/name
             |     +--ro attack-type?      identityref
             |     +--ro req-method?       identityref
             |     +--ro req-target?       string
             |     +--ro filtering-type*   identityref
             |     +--ro cookies?          string

Jeong, et al.           Expires 24 November 2022               [Page 33]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

             |     +--ro req-host?         string
             |     +--ro response-code?    string
             +--:(i2nsf-nsf-detection-voip-vocn)
                                        {i2nsf-nsf-detection-voip-vocn}?
                +--ro i2nsf-nsf-detection-voip-vocn
                   +--ro src-ip?                 inet:ip-address-no-zone
                   +--ro src-port?               inet:port-number
                   +--ro dst-ip?                 inet:ip-address-no-zone
                   +--ro dst-port?               inet:port-number
                   +--ro rule-name
                           -> /i2nsfnfi:i2nsf-security-policy/rules/name
                   +--ro source-voice-id*        string
                   +--ro destination-voice-id*   string
                   +--ro user-agent*             string

                 Figure 1: NSF Monitoring YANG Module Tree

8.  YANG Data Model of NSF Monitoring YANG Module

   This section describes a YANG module of I2NSF NSF Monitoring.  The
   data model provided in this document uses identities to be used to
   get information of the monitored of an NSF's monitoring data.  Every
   identity used in the document gives information or status about the
   current situation of an NSF.  This YANG module imports from
   [RFC6991], [RFC8343], and [I-D.ietf-i2nsf-nsf-facing-interface-dm],
   and makes references to [RFC0768] [RFC0791] [RFC0792] [RFC0826]
   [RFC0854] [RFC1939] [RFC0959] [RFC2595] [RFC4340] [RFC4443] [RFC4861]
   [RFC5321] [RFC5646] [RFC6242] [RFC6265] [RFC8200] [RFC8641] [RFC9051]
   [I-D.ietf-httpbis-http2bis] [I-D.ietf-httpbis-messaging]
   [I-D.ietf-httpbis-semantics] [I-D.ietf-tcpm-rfc793bis]
   [I-D.ietf-tsvwg-rfc4960-bis] [IANA-HTTP-Status-Code] [IEEE-802.1AB]

   <CODE BEGINS> file "ietf-i2nsf-monitoring-interface@2022-05-23.yang"
   module ietf-i2nsf-monitoring-interface {
     yang-version 1.1;
     namespace
       "urn:ietf:params:xml:ns:yang:ietf-i2nsf-monitoring-interface";
     prefix
       i2nsfmi;
     import ietf-inet-types {
       prefix inet;
       reference
         "Section 4 of RFC 6991";
     }
     import ietf-yang-types {
       prefix yang;
       reference

Jeong, et al.           Expires 24 November 2022               [Page 34]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

         "Section 3 of RFC 6991";
     }
     import ietf-i2nsf-nsf-facing-interface {
       prefix i2nsfnfi;
       reference
         "Section 4.1 of draft-ietf-i2nsf-nsf-facing-interface-dm-28";
     }
     import ietf-interfaces {
       prefix if;
       reference
         "Section 5 of RFC 8343";
     }
     organization
       "IETF I2NSF (Interface to Network Security Functions)
        Working Group";
     contact
       "WG Web: <https://datatracker.ietf.org/wg/i2nsf>
        WG List: <mailto:i2nsf@ietf.org>

        Editor: Jaehoon Paul Jeong
        <mailto:pauljeong@skku.edu>

        Editor: Patrick Lingga
        <mailto:patricklink@skku.edu>";

     description
       "This module is a YANG module for I2NSF NSF Monitoring.

        The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
        'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
        'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this
        document are to be interpreted as described in BCP 14
        (RFC 2119) (RFC 8174) when, and only when, they appear
        in all capitals, as shown here.

        Copyright (c) 2022 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Revised BSD License
        set forth in Section 4.c of the IETF Trust's
        Legal Provisions Relating to IETF Documents
        (https://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC XXXX
        (https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
        for full legal notices.";

Jeong, et al.           Expires 24 November 2022               [Page 35]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

     revision "2022-05-23" {
       description "Latest revision";
       reference
         "RFC XXXX: I2NSF NSF Monitoring Interface YANG Data Model";

       // RFC Ed.: replace XXXX with an actual RFC number and remove
       // this note.
     }

     /*
      * Typedefs
      */

     typedef severity {
       type enumeration {
         enum critical {
           description
             "The 'critical' severity level indicates that
              an immediate corrective action is required.
              A 'critical' severity is reported when a service
              becomes totally out of service and must be restored.";
         }
         enum high {
           description
             "The 'high' severity level indicates that
              an urgent corrective action is required.
              A 'high' severity is reported when there is
              a severe degradation in the capability of the
              service and its full capability must be restored.";
         }
         enum middle {
           description
             "The 'middle' severity level indicates the
              existence of a non-service-affecting fault
              condition and corrective action should be done
              to prevent a more serious fault. The 'middle'
              severity is reported when the detected problem
              is not degrading the capability of the service, but
              some service degradation might happen if not
              prevented.";
         }
         enum low {
           description
             "The 'low' severity level indicates the detection
              of a potential fault before any effect is observed.
              The 'low' severity is reported when an action should
              be done before a fault happen.";
         }

Jeong, et al.           Expires 24 November 2022               [Page 36]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       }
       description
         "An indicator representing severity levels. The severity
          levels starting from the highest are critical, high, middle,
          and low.";
     }

     typedef operation-type {
       type enumeration {
         enum login {
           description
             "The operation type is Login.";
         }
         enum logout {
           description
             "The operation type is Logout.";
         }
         enum configuration {
           description
             "The operation type is Configuration. The configuration
              operation includes the command for writing a new
              configuration and modifying an existing configuration.";
         }
         enum other {
           description
             "The operation type is Other operation. This other
              includes all operations done by a user except login,
              logout, and configuration.";
         }
       }
       description
         "The type of operation done by a user during a session.
          The user operation is not considering their privileges.";
     }

     typedef login-role {
       type enumeration {
         enum administrator {
           description
             "Administrator (i.e., Superuser)'s login role.
              Non-restricted role.";
         }
         enum user {
           description
             "User login role. Semi-restricted role, some data and
              configurations are available but confidential or important
              data and configuration are restricted.";
         }

Jeong, et al.           Expires 24 November 2022               [Page 37]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

         enum guest {
           description
             "Guest login role. Restricted role, only few read data are
              available and write configurations are restricted.";
         }
       }
       description
         "The privilege level of the user account.";
     }

     typedef centiseconds {
       type uint32;
       description
         "A period of time, measured in units of 0.01 seconds.";
     }

     /*
      * Identity
      */

     identity characteristics {
       description
         "Base identity for monitoring information
          characteristics";
     }
     identity acquisition-method {
       base characteristics;
       description
         "The type of acquisition-method. It can be multiple
          types at once.";
     }
     identity subscription {
       base acquisition-method;
       description
         "The acquisition-method type is subscription.";
     }
     identity query {
       base acquisition-method;
       description
         "The acquisition-method type is query.";
     }
     identity emission-type {
       base characteristics;
       description
         "The type of emission-type.";
     }
     identity periodic {
       base emission-type;

Jeong, et al.           Expires 24 November 2022               [Page 38]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       description
         "The emission-type type is periodic.";
     }
     identity on-change {
       base emission-type;
       description
         "The emission-type type is on-change.";
     }
     identity dampening-type {
       base characteristics;
       description
         "The type of message dampening to stop the rapid transmission
          of messages, such as on-repetition and no-dampening.";
     }
     identity no-dampening {
       base dampening-type;
       description
         "The dampening-type is no-dampening. No-dampening type does
          not limit the transmission for the messages of the same
          type.";
     }
     identity on-repetition {
       base dampening-type;
       description
         "The dampening-type is on-repetition. On-repetition type limits
          the transmitted on-change message to one message at a certain
          interval.";
     }

     identity authentication-mode {
       description
         "The authentication mode for a user to connect to the NSF,
          e.g., pre-configured-key and certificate-authority";
     }
     identity pre-configured-key {
       base authentication-mode;
       description
         "The pre-configured-key is an authentication using a key
          authentication.";
     }
     identity certificate-authority {
       base authentication-mode;
       description
         "The certificate-authority (CA) is an authentication using a
          digital certificate.";
     }

     identity event {

Jeong, et al.           Expires 24 November 2022               [Page 39]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       description
         "Base identity for I2NSF events.";
     }

     identity system-event {
       base event;
       description
         "Identity for system event";
     }

     identity system-alarm {
       base event;
       description
         "Base identity for detectable system alarm types";
     }

     identity memory-alarm {
       base system-alarm;
       description
         "Memory is the hardware to store information temporarily or for
          a short period, i.e., Random Access Memory (RAM). A
          memory-alarm is emitted when the memory usage is exceeding
          the threshold.";
     }
     identity cpu-alarm {
       base system-alarm;
       description
         "CPU is the Central Processing Unit that executes basic
          operations of the system. A cpu-alarm is emitted when the CPU
          usage is exceeding a threshold.";
     }
     identity disk-alarm {
       base system-alarm;
       description
         "Disk or storage is the hardware to store information for a
          long period, i.e., Hard Disk and Solid-State Drive. A
          disk-alarm is emitted when the disk usage is exceeding a
          threshold.";
     }
     identity hardware-alarm {
       base system-alarm;
       description
         "A hardware alarm is emitted when a hardware failure (e.g.,
          CPU, memory, disk, or interface) is detected. A hardware
          failure is a malfunction within the electronic circuits or
          electromechanical components of the hardware that makes it
          unusable.";
     }

Jeong, et al.           Expires 24 November 2022               [Page 40]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

     identity interface-alarm {
       base system-alarm;
       description
         "Interface is the network interface for connecting a device
          with the network. The interface-alarm is emitted when the
          state of the interface is changed.";
     }

     identity access-violation {
       base system-event;
       description
         "Access-violation system event is an event when a user tries
          to access (read, write, create, or delete) any information or
          execute commands above their privilege (i.e., not-conformant
          with the access profile).";
     }
     identity configuration-change {
       base system-event;
       description
         "The configuration-change system event is an event when a user
          adds a new configuration or modify an existing configuration
          (write configuration).";
     }

     identity attack-type {
       description
         "The root ID of attack-based notification
          in the notification taxonomy";
     }
     identity nsf-attack-type {
       base attack-type;
       description
         "This ID is intended to be used
          in the context of NSF event.";
     }

     identity virus-type {
       base nsf-attack-type;
       description
         "The type of virus. It can be multiple types at once.
          This attack type is associated with a detected
          system-log virus-attack.";
     }
     identity trojan {
       base virus-type;
       description
         "The virus type is a trojan. Trojan is able to disguise the
          intent of the files or programs to misleads the users.";

Jeong, et al.           Expires 24 November 2022               [Page 41]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

     }
     identity worm {
       base virus-type;
       description
         "The virus type is a worm. Worm can self-replicate and
          spread through the network automatically.";
     }
     identity macro {
       base virus-type;
       description
         "The virus type is a macro virus. Macro causes a series of
          threats automatically after the program is executed.";
     }
     identity boot-sector {
       base virus-type;
       description
         "The virus type is a boot sector virus. Boot sector is a virus
          that infects the core of the computer, affecting the startup
          process.";
     }
     identity polymorphic {
       base virus-type;
       description
         "The virus type is a polymorphic virus. Polymorphic can
          modify its version when it replicates, making it hard to
          detect.";
     }
     identity overwrite {
       base virus-type;
       description
         "The virus type is an overwrite virus. Overwrite can remove
          existing software and replace it with malicious code by
          overwriting it.";
     }
     identity resident {
       base virus-type;
       description
         "The virus-type is a resident virus. Resident saves itself in
          the computer's memory and infects other files and software.";
     }
     identity non-resident {
       base virus-type;
       description
         "The virus-type is a non-resident virus. Non-resident attaches
          directly to an executable file and enters the device when
          executed.";
     }
     identity multipartite {

Jeong, et al.           Expires 24 November 2022               [Page 42]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       base virus-type;
       description
         "The virus-type is a multipartite virus. Multipartite attacks
          both the boot sector and executables files of a computer.";
     }
     identity spacefiller {
       base virus-type;
       description
         "The virus-type is a spacefiller virus. Spacefiller fills empty
          spaces of a file or software with malicious code.";
     }

     identity intrusion-attack-type {
       base nsf-attack-type;
       description
         "The attack type is associated with a detected
          system-log intrusion.";
     }
     identity brute-force {
       base intrusion-attack-type;
       description
         "The intrusion type is brute-force.";
     }
     identity buffer-overflow {
       base intrusion-attack-type;
       description
         "The intrusion type is buffer-overflow.";
     }
     identity web-attack-type {
       base nsf-attack-type;
       description
         "The attack type is associated with a detected
          system-log web-attack.";
     }
     identity command-injection {
       base web-attack-type;
       description
         "The detected web attack type is command injection.";
     }
     identity xss {
       base web-attack-type;
       description
         "The detected web attack type is Cross Site Scripting (XSS).";
     }
     identity csrf {
       base web-attack-type;
       description
         "The detected web attack type is Cross Site Request Forgery.";

Jeong, et al.           Expires 24 November 2022               [Page 43]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

     }

     identity ddos-type {
       base nsf-attack-type;
       description
         "Base identity for detectable flood types";
     }
     identity syn-flood {
       base ddos-type;
       description
         "A SYN flood is detected.";
     }
     identity ack-flood {
       base ddos-type;
       description
         "An ACK flood is detected.";
     }
     identity syn-ack-flood {
       base ddos-type;
       description
         "A SYN-ACK flood is detected.";
     }
     identity fin-rst-flood {
       base ddos-type;
       description
         "A FIN-RST flood is detected.";
     }
     identity tcp-con-flood {
       base ddos-type;
       description
         "A TCP connection flood is detected.";
     }
     identity udp-flood {
       base ddos-type;
       description
         "A UDP flood is detected.";
     }
     identity icmpv4-flood {
       base ddos-type;
       description
         "An ICMPv4 flood is detected.";
     }
     identity icmpv6-flood {
       base ddos-type;
       description
         "An ICMPv6 flood is detected.";
     }
     identity http-flood {

Jeong, et al.           Expires 24 November 2022               [Page 44]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       base ddos-type;
       description
         "An HTTP flood is detected.";
     }
     identity https-flood {
       base ddos-type;
       description
         "An HTTPS flood is detected.";
     }
     identity dns-query-flood {
       base ddos-type;
       description
         "A Domain Name System (DNS) query flood is detected.";
     }
     identity dns-reply-flood {
       base ddos-type;
       description
        "A Domain Name System (DNS) reply flood is detected.";
     }
     identity sip-flood {
       base ddos-type;
       description
         "A Session Initiation Protocol (SIP) flood is detected.";
     }
     identity tls-flood {
       base ddos-type;
       description
         "A Transport Layer Security (TLS) flood is detected";
     }
     identity ntp-amp-flood {
       base ddos-type;
       description
         "A Network Time Protocol (NTP) amplification is detected";
     }

     identity req-method {
       description
         "A set of request types in HTTP (if applicable).";
     }
     identity put {
       base req-method;
       description
         "The detected request type is PUT.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          - Request Method PUT";
     }
     identity post {

Jeong, et al.           Expires 24 November 2022               [Page 45]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       base req-method;
       description
         "The detected request type is POST.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          - Request Method POST";
     }
     identity get {
       base req-method;
       description
         "The detected request type is GET.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          - Request Method GET";
     }
     identity head {
       base req-method;
       description
         "The detected request type is HEAD.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          - Request Method HEAD";
     }
     identity delete {
       base req-method;
       description
         "The detected request type is DELETE.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          - Request Method DELETE";
     }
     identity connect {
       base req-method;
       description
         "The detected request type is CONNECT.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          - Request Method CONNECT";
     }
     identity options {
       base req-method;
       description
         "The detected request type is OPTIONS.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          - Request Method OPTIONS";
     }
     identity trace {

Jeong, et al.           Expires 24 November 2022               [Page 46]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       base req-method;
       description
         "The detected request type is TRACE.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          - Request Method TRACE";
     }

     identity filter-type {
       description
         "The type of filter used to detect an attack,
          for example, a web-attack.  It can be applicable to
          more than web-attacks.";
     }
     identity allow-list {
       base filter-type;
       description
         "The applied filter type is an allow list. This filter blocks
          all connection except the specified list.";
     }
     identity deny-list {
       base filter-type;
       description
         "The applied filter type is a deny list. This filter opens all
          connection except the specified list.";
     }
     identity unknown-filter {
       base filter-type;
       description
         "The applied filter is unknown.";
     }

     identity dpi-type {
       description
         "Base identity for the type of Deep Packet Inspection (DPI).";
     }
     identity file-blocking {
       base dpi-type;
       description
         "DPI for preventing the specified file types from flowing
          in the network.";
     }
     identity data-filtering {
       base dpi-type;
       description
         "DPI for preventing sensitive information (e.g., Credit
          Card Number or Social Security Numbers) leaving a
          protected network.";

Jeong, et al.           Expires 24 November 2022               [Page 47]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

     }
     identity application-behavior-control {
       base dpi-type;
       description
         "DPI for filtering packet based on the application or
          network behavior analysis to identify malicious or
          unusual activity.";
     }

     identity protocol {
       description
         "An identity used to enable type choices in leaves
          and leaf-lists with respect to protocol metadata. This is used
          to identify the type of protocol that goes through the NSF.";
     }
     identity ip {
       base protocol;
       description
         "General IP protocol type.";
       reference
         "RFC 791: Internet Protocol
          RFC 8200: Internet Protocol, Version 6 (IPv6)";
     }
     identity ipv4 {
       base ip;
       description
         "IPv4 protocol type.";
       reference
         "RFC 791: Internet Protocol";
     }
     identity ipv6 {
       base ip;
       description
         "IPv6 protocol type.";
       reference
         "RFC 8200: Internet Protocol, Version 6 (IPv6)";
     }
     identity icmp {
       base protocol;
       description
         "Base identity for ICMPv4 and ICMPv6 condition capability";
       reference
         "RFC 792: Internet Control Message Protocol
          RFC 4443: Internet Control Message Protocol (ICMPv6)
          for the Internet Protocol Version 6 (IPv6) Specification
          - ICMPv6";
     }
     identity icmpv4 {

Jeong, et al.           Expires 24 November 2022               [Page 48]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       base icmp;
       description
         "ICMPv4 protocol type.";
       reference
         "RFC 791: Internet Protocol
          RFC 792: Internet Control Message Protocol";
     }
     identity icmpv6 {
       base icmp;
       description
         "ICMPv6 protocol type.";
       reference
         "RFC 8200: Internet Protocol, Version 6 (IPv6)
          RFC 4443: Internet Control Message Protocol (ICMPv6)
          for the Internet Protocol Version 6 (IPv6)
          Specification";
     }
     identity transport-protocol {
       base protocol;
       description
         "Base identity for Layer 4 protocol condition capabilities,
          e.g., TCP, UDP, SCTP, DCCP, and ICMP";
     }
     identity tcp {
       base transport-protocol;
       description
         "TCP protocol type.";
       reference
         "draft-ietf-tcpm-rfc793bis-25: Transmission Control Protocol
          (TCP) Specification";
     }
     identity udp {
       base transport-protocol;
       description
         "UDP protocol type.";
       reference
         "RFC 768: User Datagram Protocol";
     }
     identity sctp {
       base transport-protocol;
       description
         "Identity for SCTP condition capabilities";
       reference
         "draft-ietf-tsvwg-rfc4960-bis-18: Stream Control Transmission
          Protocol";
     }
     identity dccp {
       base transport-protocol;

Jeong, et al.           Expires 24 November 2022               [Page 49]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       description
         "Identity for DCCP condition capabilities";
       reference
         "RFC 4340: Datagram Congestion Control Protocol";
     }
     identity application-protocol {
       base protocol;
       description
         "Base identity for Application protocol. Note that a subset of
          application protocols (e.g., HTTP, HTTPS, FTP, POP3, and
          IMAP) are handled in this YANG module, rather than all
          the existing application protocols.";
     }
     identity http {
       base application-protocol;
       description
         "The identity for Hypertext Transfer Protocol version 1.1
          (HTTP/1.1).";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          draft-ietf-httpbis-messaging-19: HTTP/1.1";
     }
     identity https {
       base application-protocol;
       description
         "The identity for Hypertext Transfer Protocol version 1.1
          (HTTP/1.1) over TLS.";
       reference
         "draft-ietf-httpbis-semantics-19: HTTP Semantics
          draft-ietf-httpbis-messaging-19: HTTP/1.1";
     }
     identity http2 {
       base application-protocol;
       description
         "The identity for Hypertext Transfer Protocol version 2
          (HTTP/2).";
       reference
         "draft-ietf-httpbis-http2bis-07: HTTP/2";
     }
     identity https2 {
       base application-protocol;
       description
         "The identity for Hypertext Transfer Protocol version 2
          (HTTP/2) over TLS.";
       reference
         "draft-ietf-httpbis-http2bis-07: HTTP/2";
     }
     identity ftp {

Jeong, et al.           Expires 24 November 2022               [Page 50]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       base application-protocol;
       description
         "FTP protocol type.";
       reference
         "RFC 959: File Transfer Protocol";
     }
     identity ssh {
       base application-protocol;
       description
         "SSH protocol type.";
       reference
         "RFC 6242: Using the NETCONF Protocol over Secure Shell (SSH)";
     }
     identity telnet {
       base application-protocol;
       description
         "The identity for telnet.";
       reference
         "RFC 854: Telnet Protocol";
     }
     identity smtp {
       base application-protocol;
       description
         "The identity for smtp.";
       reference
         "RFC 5321: Simple Mail Transfer Protocol (SMTP)";
     }
     identity pop3 {
       base application-protocol;
       description
         "The identity for Post Office Protocol 3 (POP3).";
       reference
         "RFC 1939: Post Office Protocol - Version 3 (POP3)";
     }
     identity pop3s {
       base application-protocol;
       description
         "The identity for Post Office Protocol 3 (POP3) over TLS";
       reference
         "RFC 1939: Post Office Protocol - Version 3 (POP3)
          RFC 2595: Using TLS with IMAP, POP3 and ACAP";
     }
     identity imap {
       base application-protocol;
       description
         "The identity for Internet Message Access Protocol (IMAP).";
       reference
         "RFC 9051: Internet Message Access Protocol (IMAP) - Version

Jeong, et al.           Expires 24 November 2022               [Page 51]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

          4rev2";
     }
     identity imaps {
       base application-protocol;
       description
         "The identity for Internet Message Access Protocol (IMAP) over
          TLS";
       reference
         "RFC 9051: Internet Message Access Protocol (IMAP) - Version
          4rev2
          RFC 2595: Using TLS with IMAP, POP3 and ACAP";
     }

     /*
      * Grouping
      */

     grouping timestamp {
       description
         "Grouping for identifying the time of the message.";
       leaf timestamp {
         type yang:date-and-time;
         description
           "Specify the time of a message being delivered.";
       }
     }

     grouping message {
       description
         "A set of common monitoring data that is needed
          as the basic information.";
       leaf message {
         type string;
         description
           "This is a freetext annotation for
            monitoring a notification's content.";
       }
       leaf language {
         type string {
           pattern '(([A-Za-z]{2,3}(-[A-Za-z]{3}(-[A-Za-z]{3})'
                 + '{0,2})?|[A-Za-z]{4}|[A-Za-z]{5,8})(-[A-Za-z]{4})?'
                 + '(-([A-Za-z]{2}|[0-9]{3}))?(-([A-Za-z0-9]{5,8}'
                 + '|([0-9][A-Za-z0-9]{3})))*(-[0-9A-WY-Za-wy-z]'
                 + '(-([A-Za-z0-9]{2,8}))+)*(-[Xx](-([A-Za-z0-9]'
                 + '{1,8}))+)?|[Xx](-([A-Za-z0-9]{1,8}))+|'
                 + '(([Ee][Nn]-[Gg][Bb]-[Oo][Ee][Dd]|[Ii]-'
                 + '[Aa][Mm][Ii]|[Ii]-[Bb][Nn][Nn]|[Ii]-'
                 + '[Dd][Ee][Ff][Aa][Uu][Ll][Tt]|[Ii]-'

Jeong, et al.           Expires 24 November 2022               [Page 52]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

                 + '[Ee][Nn][Oo][Cc][Hh][Ii][Aa][Nn]'
                 + '|[Ii]-[Hh][Aa][Kk]|'
                 + '[Ii]-[Kk][Ll][Ii][Nn][Gg][Oo][Nn]|'
                 + '[Ii]-[Ll][Uu][Xx]|[Ii]-[Mm][Ii][Nn][Gg][Oo]|'
                 + '[Ii]-[Nn][Aa][Vv][Aa][Jj][Oo]|[Ii]-[Pp][Ww][Nn]|'
                 + '[Ii]-[Tt][Aa][Oo]|[Ii]-[Tt][Aa][Yy]|'
                 + '[Ii]-[Tt][Ss][Uu]|[Ss][Gg][Nn]-[Bb][Ee]-[Ff][Rr]|'
                 + '[Ss][Gg][Nn]-[Bb][Ee]-[Nn][Ll]|[Ss][Gg][Nn]-'
                 + '[Cc][Hh]-[Dd][Ee])|([Aa][Rr][Tt]-'
                 + '[Ll][Oo][Jj][Bb][Aa][Nn]|[Cc][Ee][Ll]-'
                 + '[Gg][Aa][Uu][Ll][Ii][Ss][Hh]|'
                 + '[Nn][Oo]-[Bb][Oo][Kk]|[Nn][Oo]-'
                 + '[Nn][Yy][Nn]|[Zz][Hh]-[Gg][Uu][Oo][Yy][Uu]|'
                 + '[Zz][Hh]-[Hh][Aa][Kk][Kk][Aa]|[Zz][Hh]-'
                 + '[Mm][Ii][Nn]|[Zz][Hh]-[Mm][Ii][Nn]-'
                 + '[Nn][Aa][Nn]|[Zz][Hh]-[Xx][Ii][Aa][Nn][Gg])))';
         }
         default "en-US";
         description
           "The value in this field indicates the language tag
            used for the human readable fields (i.e., '../message',
            '/i2nsf-log/i2nsf-nsf-system-access-log/output', and
            '/i2nsf-log/i2nsf-system-user-activity-log/additional-info
            /cause').
            The attribute is encoded following the rules in Section 2.1
            in RFC 5646. The default language tag is 'en-US'";
         reference
           "RFC 5646: Tags for Identifying Languages";
       }
     }

     grouping common-monitoring-data {
       description
         "A set of common monitoring data that is needed
         as the basic information.";

       leaf vendor-name {
         type string;
         description
           "The name of the NSF vendor. The string is unrestricted to
            identify the provider or vendor of the NSF.";
       }
       leaf device-model {
         type string;
         description
           "The model of the device, can be represented by the
            device model name or serial number. This field is used to
            identify the model of the device that provides the security

Jeong, et al.           Expires 24 November 2022               [Page 53]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

            service.";
       }
       leaf software-version {
         type string;
         description
           "The version of the software used to provide the security
            service";
       }
       leaf nsf-name {
         type union {
           type string;
           type inet:ip-address-no-zone;
         }
         mandatory true;
         description
           "The name or IP address of the NSF generating the message.
            If the given nsf-name is not an IP address, the name can be
            an arbitrary string including a FQDN (Fully Qualified Domain
            Name). The name MUST be unique in the scope of management
            domain for a different NSF to identify the NSF that
            generates the message.";
       }
     }
     grouping characteristics {
       description
         "A set of characteristics of a monitoring information.";
       leaf acquisition-method {
         type identityref {
           base acquisition-method;
         }
         description
           "The acquisition-method for characteristics";
       }
       leaf emission-type {
         when "derived-from-or-self(../acquisition-method, "
            + "'i2nsfmi:subscription')";
         type identityref {
           base emission-type;
         }
         description
           "The emission-type for characteristics. This attribute is
            used only when the acquisition-method is a 'subscription'";
       }
     }
     grouping characteristics-extended {
       description
         "An extended characteristics for the monitoring information.";
       uses characteristics;

Jeong, et al.           Expires 24 November 2022               [Page 54]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       leaf dampening-type {
         type identityref {
           base dampening-type;
         }
         description
           "The dampening-type for characteristics";
       }
     }
     grouping i2nsf-system-alarm-type-content {
       description
         "A set of contents for alarm type notification.";
       leaf usage {
         type uint8 {
           range "0..100";
         }
         units "percent";
         description
           "Specifies the used percentage";
       }
       leaf threshold {
         type uint8 {
           range "0..100";
         }
         units "percent";
         description
           "The threshold percentage triggering the alarm or
            the event";
       }
     }
     grouping i2nsf-system-event-type-content {
       description
         "System event metadata associated with system events
          caused by user activity. This can be extended to provide
          additional information.";
       leaf user {
         type string;
         mandatory true;
         description
           "The name of a user";
       }
       leaf-list group {
         type string;
         min-elements 1;
         description
           "The group(s) to which a user belongs.";
       }
       leaf ip-address {
         type inet:ip-address-no-zone;

Jeong, et al.           Expires 24 November 2022               [Page 55]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

         mandatory true;
         description
           "The IPv4 or IPv6 address of a user that trigger the
            event.";
       }
       leaf l4-port-number {
         type inet:port-number;
         mandatory true;
         description
           "The transport layer port number used by the user.";
       }
       leaf authentication {
         type identityref {
           base authentication-mode;
         }
         description
           "The authentication-mode of a user.";
       }
     }
     grouping i2nsf-nsf-event-type-content {
       description
         "A set of common IPv4 or IPv6-related NSF event
          content elements";
       leaf dst-ip {
         type inet:ip-address-no-zone;
         description
           "The destination IPv4 or IPv6 address of the packet";
       }
       leaf dst-port {
         type inet:port-number;
         description
           "The destination port of the packet";
       }
       leaf rule-name {
         type leafref {
           path
             "/i2nsfnfi:i2nsf-security-policy"
            +"/i2nsfnfi:rules/i2nsfnfi:name";
         }
         mandatory true;
         description
           "The name of the I2NSF Policy Rule being triggered";
       }
     }
     grouping i2nsf-nsf-event-type-content-extend {
       description
         "A set of extended common IPv4 or IPv6 related NSF
          event content elements";

Jeong, et al.           Expires 24 November 2022               [Page 56]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       leaf src-ip {
         type inet:ip-address-no-zone;
         description
           "The source IPv4 or IPv6 address of the packet or flow";
       }
       leaf src-port {
         type inet:port-number;
         description
           "The source port of the packet or flow";
       }
       uses i2nsf-nsf-event-type-content;
     }
     grouping action {
       description
         "A grouping for action.";
       leaf-list action {
         type identityref {
           base i2nsfnfi:ingress-action;
         }
         description
           "Action type: pass, drop, reject, mirror, or rate limit";
       }
     }
     grouping attack-rates {
       description
         "A set of traffic rates for monitoring attack traffic
          data";
       leaf attack-rate {
         type uint64;
         units "pps";
         description
           "The average packets per second (pps) rate of attack
            traffic";
       }
       leaf attack-throughput {
         type uint64;
         units "Bps";
         description
           "The average bytes per second (Bps) throughput of attack
            traffic";
       }
     }
     grouping traffic-rates {
       description
         "A set of traffic rates for statistics data";
       leaf discontinuity-time {
         type yang:date-and-time;
         mandatory true;

Jeong, et al.           Expires 24 November 2022               [Page 57]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

         description
           "The time on the most recent occasion at which any one or
            more of the counters suffered a discontinuity.
            If no such discontinuities have occurred since the last
            re-initialization of the local management subsystem, then
            this node contains the time the local management subsystem
            was re-initialized.";
       }
       leaf measurement-time {
         type uint32;
         units "seconds";
         description
           "The time of the measurement in seconds for the
            calculation of statistics such as traffic rate and
            throughput. The statistic attributes are measured over
            the past measurement duration before now.";
       }
       leaf total-traffic {
         type yang:counter64;
         units "packets";
         description
           "The total number of traffic packets (in and out) in the
            NSF.";
       }
       leaf in-traffic-average-rate {
         type uint64;
         units "pps";
         description
           "Inbound traffic average rate in packets per second (pps).
            The average is calculated from the start of the NSF service
            until the generation of this record.";
       }
       leaf in-traffic-peak-rate {
         type uint64;
         units "pps";
         description
           "Inbound traffic peak rate in packets per second (pps).";
       }
       leaf in-traffic-average-throughput {
         type uint64;
         units "Bps";
         description
           "Inbound traffic average throughput in bytes per second
            (Bps). The average is calculated from the start of the NSF
            service until the generation of this record.";
       }
       leaf in-traffic-peak-throughput {
         type uint64;

Jeong, et al.           Expires 24 November 2022               [Page 58]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

         units "Bps";
         description
           "Inbound traffic peak throughput in bytes per second (Bps).";
       }
       leaf out-traffic-average-rate {
         type uint64;
         units "pps";
         description
           "Outbound traffic average rate in packets per second (pps).
            The average is calculated from the start of the NSF service
            until the generation of this record.";
       }
       leaf out-traffic-peak-rate {
         type uint64;
         units "pps";
         description
          "Outbound traffic peak rate in packets per second (pps).";
       }
       leaf out-traffic-average-throughput {
         type uint64;
         units "Bps";
         description
           "Outbound traffic average throughput in bytes per second
            (Bps). The average is calculated from the start of the NSF
            service until the generation of this record.";
       }
       leaf out-traffic-peak-throughput {
         type uint64;
         units "Bps";
         description
           "Outbound traffic peak throughput in bytes per second
            (Bps).";
       }
     }
     grouping i2nsf-system-counter-type-content {
       description
         "A set of counters for an interface traffic data.";
       leaf interface-name {
         type if:interface-ref;
         description
           "Network interface name configured in an NSF";
         reference
           "RFC 8343: A YANG Data Model for Interface Management";
       }
       leaf protocol {
         type identityref {
           base protocol;
         }

Jeong, et al.           Expires 24 November 2022               [Page 59]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

         description
           "The type of network protocol for the interface counter.
            If this field is empty, then the counter includes all
            protocols (e.g., IPv4, IPv6, TCP, and UDP)";
       }
       leaf in-total-traffic-pkts {
         type yang:counter64;
         description
           "Total inbound packets";
       }
       leaf out-total-traffic-pkts {
         type yang:counter64;
         description
           "Total outbound packets";
       }
       leaf in-total-traffic-bytes {
         type uint64;
         units "bytes";
         description
           "Total inbound bytes";
       }
       leaf out-total-traffic-bytes {
         type uint64;
         units "bytes";
         description
           "Total outbound bytes";
       }
       leaf in-drop-traffic-pkts {
         type yang:counter64;
         description
           "Total inbound drop packets";
       }
       leaf out-drop-traffic-pkts {
         type yang:counter64;
         description
           "Total outbound drop packets";
       }
       leaf in-drop-traffic-bytes {
         type uint64;
         units "bytes";
         description
           "Total inbound drop bytes";
       }
       leaf out-drop-traffic-bytes {
         type uint64;
         units "bytes";
         description
           "Total outbound drop bytes";

Jeong, et al.           Expires 24 November 2022               [Page 60]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       }
       uses traffic-rates;
     }

     grouping i2nsf-nsf-counters-type-content {
       description
         "A set of contents of a policy in an NSF.";
       leaf policy-name {
         type leafref {
           path
             "/i2nsfnfi:i2nsf-security-policy"
            +"/i2nsfnfi:name";
         }
         mandatory true;
         description
           "The name of the policy being triggered";
       }
     }

     grouping enable-notification {
       description
         "A grouping for enabling or disabling notification";
       leaf enabled {
         type boolean;
         default "true";
         description
           "Enables or Disables the notification.
            If 'true', then the notification is enabled.
            If 'false, then the notification is disabled.";
       }
     }

     grouping dampening {
       description
         "A grouping for dampening period of notification.";
       leaf dampening-period {
         type centiseconds;
         default "0";
         description
           "Specifies the minimum interval between the assembly of
            successive update records for a single receiver of a
            subscription. Whenever subscribed objects change and
            a dampening-period interval (which may be zero) has
            elapsed since the previous update record creation for
            a receiver, any subscribed objects and properties
            that have changed since the previous update record
            will have their current values marshalled and placed
            in a new update record. But if the subscribed objects change

Jeong, et al.           Expires 24 November 2022               [Page 61]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

            when the dampening-period is active, it should update the
            record without sending the notification until the dampening-
            period is finished. If multiple changes happen during the
            active dampening-period, it should update the record with
            the latest data. And at the end of the dampening-period, it
            should send the record as a notification with the latest
            updated record and restart the countdown.";
         reference
           "RFC 8641:  Subscription to YANG Notifications for
            Datastore Updates - Section 5.";
       }
     }

     /*
      * Feature Nodes
      */

     feature i2nsf-nsf-detection-ddos {
       description
         "This feature means it supports I2NSF nsf-detection-ddos
          notification";
     }
     feature i2nsf-nsf-detection-virus {
       description
         "This feature means it supports I2NSF nsf-detection-virus
          notification";
     }
     feature i2nsf-nsf-detection-intrusion {
       description
         "This feature means it supports I2NSF nsf-detection-intrusion
          notification";
     }
     feature i2nsf-nsf-detection-web-attack {
       description
         "This feature means it supports I2NSF nsf-detection-web-attack
          notification";
     }
     feature i2nsf-nsf-detection-voip-vocn {
       description
         "This feature means it supports I2NSF nsf-detection-voip-vocn
          notification";
     }
     feature i2nsf-nsf-log-dpi {
       description
         "This feature means it supports I2NSF nsf-log-dpi
          notification";
     }

Jeong, et al.           Expires 24 November 2022               [Page 62]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

     /*
      * Notification nodes
      */

     notification i2nsf-event {
       description
         "Notification for I2NSF Event. This notification provides
          general information that can be supported by most types of
          NSFs.";

       uses common-monitoring-data;
       uses message;
       uses characteristics-extended;

       choice sub-event-type {
         description
           "This choice must be augmented with cases for each allowed
            sub-event. Only 1 sub-event will be instantiated in each
            i2nsf-event message. Each case is expected to define one
            container with all the sub-event fields.";
         case i2nsf-system-detection-alarm {
           container i2nsf-system-detection-alarm {
             description
               "This notification is sent, when a system alarm
                is detected.";
             leaf alarm-category {
               type identityref {
                 base system-alarm;
               }
               description
                 "The alarm category for
                  system-detection-alarm notification";
             }
             leaf component-name {
               type string;
               description
                 "The hardware component responsible for generating
                  the message. Applicable for Hardware Failure
                  Alarm.";
             }
             leaf interface-name {
               when "derived-from-or-self(../alarm-category, "
                  + "'i2nsfmi:interface-alarm')";
               type if:interface-ref;
               description
                 "The interface name responsible for generating
                  the message. Applicable for Network Interface
                  Failure Alarm.";

Jeong, et al.           Expires 24 November 2022               [Page 63]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

               reference
                 "RFC 8343: A YANG Data Model for Interface Management";
             }
             leaf interface-state {
               when "derived-from-or-self(../alarm-category, "
                  + "'i2nsfmi:interface-alarm')";
               type enumeration {
                 enum up {
                   value 1;
                   description
                     "The interface state is up and not congested.
                      The interface is ready to pass packets.";
                 }
                 enum down {
                   value 2;
                   description
                     "The interface state is down, i.e., does not pass
                      any packets.";
                 }
                 enum congested {
                   value 3;
                   description
                     "The interface state is up but congested.";
                 }
                 enum testing {
                   value 4;
                   description
                     "In some test mode.  No operational packets can
                      be passed.";
                 }
                 enum unknown {
                   value 5;
                   description
                     "Status cannot be determined for some reason.";
                 }
                 enum dormant {
                   value 6;
                   description
                     "Waiting for some external event.";
                  }
                 enum not-present {
                   value 7;
                   description
                     "Some component (typically hardware) is missing.";
                 }
                 enum lower-layer-down {
                   value 8;
                   description

Jeong, et al.           Expires 24 November 2022               [Page 64]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

                     "Down due to state of lower-layer interface(s).";
                 }
               }
               description
                 "The state of the interface. Applicable for Network
                  Interface Failure Alarm.";
               reference
                 "RFC 8343: A YANG Data Model for Interface Management -
                  Operational States";
             }
             leaf severity {
               type severity;
               description
                 "The severity of the alarm such as critical, high,
                  middle, and low.";
             }
             uses i2nsf-system-alarm-type-content;
           }
         }

         case i2nsf-system-detection-event {
           container i2nsf-system-detection-event {
             description
               "This notification is sent when an event in the system is
                detected, such as access violation and configuration
                change";
             leaf event-category {
               type identityref {
                 base system-event;
               }
               description
                 "The event category for system-detection-event";
             }
             uses i2nsf-system-event-type-content;
             list changes {
               when "derived-from-or-self(../event-category, "
                  + "'i2nsfmi:configuration-change')";
               key policy-name;
               description
                 "Describes the modification that was made to the
                  configuration. This list is only applicable when the
                  event is 'configuration-change'.
                  The minimum information that must be provided is the
                  name of the policy that has been altered (added,
                  modified, or removed).
                  This list can be extended with the detailed
                  information about the specific changes made to the
                  configuration based on the implementation.";

Jeong, et al.           Expires 24 November 2022               [Page 65]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

               leaf policy-name {
                 type leafref {
                   path
                     "/i2nsfnfi:i2nsf-security-policy"
                    +"/i2nsfnfi:name";
                 }
                 description
                   "The name of the policy configuration that has been
                    added, modified, or removed.";
               }
             }
           }
         }

         case i2nsf-traffic-flows {
           container i2nsf-traffic-flows {
             description
               "This notification is sent to inform about the traffic
                flows.";
             leaf interface-name {
               type if:interface-ref;
               description
                 "The mnemonic name of the network interface";
             }
             leaf interface-type {
               type enumeration {
                 enum ingress {
                   description
                     "The corresponding interface-name indicates an
                      ingress interface.";
                 }
                 enum egress {
                   description
                     "The corresponding interface-name indicates an
                      egress interface.";
                 }
               }
               description
                 "The type of a network interface such as an ingress or
                  egress interface.";
             }
             leaf src-mac {
               type yang:mac-address;
               description
                 "The source MAC address of the traffic flow. This
                  information may or may not be included depending on
                  the type of traffic flow. For example, the information
                  will be useful and should be included if the traffic

Jeong, et al.           Expires 24 November 2022               [Page 66]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

                  flows are traffic flows of Link Layer Discovery
                  Protocol (LLDP), Address Resolution Protocol (ARP) for
                  IPv4, and Neighbor Discovery Protocol (ND) for IPv6.";
               reference
                 "IEEE-802.1AB: IEEE Standard for Local and metropolitan
                  area networks - Station and Media Access Control
                  Connectivity Discovery - Link Layer Discovery Protocol
                  (LLDP)
                  RFC 826: An Ethernet Address Resolution Protocol -
                  Address Resolution Protocol (ARP)
                  RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
                  Neighbor Discovery Protocol (ND)";
             }
             leaf dst-mac {
               type yang:mac-address;
               description
                 "The destination MAC address of the traffic flow. This
                  information may or may not be included depending on
                  the type of traffic flow. For example, the information
                  will be useful and should be included if the traffic
                  flows are traffic flows of Link Layer Discovery
                  Protocol (LLDP), Address Resolution Protocol (ARP) for
                  IPv4, and Neighbor Discovery Protocol (ND) for IPv6.";
               reference
                 "IEEE-802.1AB: IEEE Standard for Local and metropolitan
                  area networks - Station and Media Access Control
                  Connectivity Discovery - Link Layer Discovery Protocol
                  (LLDP)
                  RFC 826: An Ethernet Address Resolution Protocol -
                  Address Resolution Protocol (ARP)
                  RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
                  Neighbor Discovery Protocol (ND)";
             }
             leaf src-ip {
               type inet:ip-address-no-zone;
               description
                 "The source IPv4 or IPv6 address of the traffic flow";
             }
             leaf dst-ip {
               type inet:ip-address-no-zone;
               description
                 "The destination IPv4 or IPv6 address of the traffic
                  flow";
             }
             leaf protocol {
               type identityref {
                 base protocol;
               }

Jeong, et al.           Expires 24 November 2022               [Page 67]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

               description
                 "The protocol type of a traffic flow";
             }
             leaf src-port {
               type inet:port-number;
               description
                 "The transport layer source port number of the flow";
             }
             leaf dst-port {
               type inet:port-number;
               description
                 "The transport layer destination port number of the
                  flow";
             }
             leaf measurement-time {
               type uint32;
               units "seconds";
               description
                 "The duration of the measurement in seconds for the
                  arrival rate and arrival throughput of packets of a
                  traffic flow. These two metrics (i.e., arrival rate
                  and arrival throughput) are measured over the past
                  measurement duration before now.";
             }
             leaf arrival-rate {
               type uint64;
               units "pps";
               description
                 "The arrival rate of packets of the traffic flow in
                  packets per second measured over the past
                  'measurement-time'.";
             }
             leaf arrival-throughput {
               type uint64;
               units "Bps";
               description
                 "The arrival rate of packets of the traffic flow in
                  bytes per second measured over the past
                  'measurement-time'.";
             }
           }
         }

         case i2nsf-nsf-detection-session-table {
           container i2nsf-nsf-detection-session-table {
             description
               "This notification is sent, when a session table
                event is detected.";

Jeong, et al.           Expires 24 November 2022               [Page 68]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

             leaf current-session {
               type uint32;
               description
                 "The number of concurrent sessions";
             }
             leaf maximum-session {
               type uint32;
               description
                 "The maximum number of sessions that the session
                  table can support";
             }
             leaf threshold {
               type uint32;
               description
                 "The threshold triggering the event";
             }
           }
         }
       }
     }

     notification i2nsf-log {
       description
         "Notification for I2NSF log. The notification is generated
          from the logs of the NSF.";

       uses common-monitoring-data;
       uses message;
       uses characteristics-extended;

       choice sub-logs-type {
         description
           "This choice must be augmented with cases for each allowed
            sub-logs. Only 1 sub-event will be instantiated in each
            i2nsf-logs message. Each case is expected to define one
            container with all the sub-logs fields.";
         case i2nsf-nsf-system-access-log {
           container i2nsf-nsf-system-access-log {
             description
               "The notification is sent, if there is a new system
                log entry about a system access event.";
             uses i2nsf-system-event-type-content;
             leaf operation-type {
               type operation-type;
               description
                 "The operation type that the user executes";
             }
             leaf input {

Jeong, et al.           Expires 24 November 2022               [Page 69]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

               type string;
               description
                 "The operation performed by a user after login. The
                  operation is a command given by a user.";
             }
             leaf output {
               type string;
               description
                 "The result in text format after executing the
                  input.";
             }
           }
         }

         case i2nsf-system-res-util-log {
           container i2nsf-system-res-util-log {
             description
               "This notification is sent, if there is a new log
                entry representing resource utilization updates.";
             leaf system-status {
               type enumeration {
                 enum running {
                   description
                     "The system is active and running the security
                      service.";
                 }
                 enum waiting {
                   description
                     "The system is active but waiting for an event to
                      provide the security service.";
                 }
                 enum inactive {
                   description
                     "The system is inactive and not running the
                      security service.";
                 }
               }
               description
                 "The current system's running status";
             }
             leaf cpu-usage {
               type uint8;
               units "percent";
               description
                 "Specifies the relative percentage of CPU utilization
                  with respect to platform resources";
             }
             leaf memory-usage {

Jeong, et al.           Expires 24 November 2022               [Page 70]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

               type uint8;
               units "percent";
               description
                 "Specifies the percentage of memory usage.";
             }
             list disks {
               key disk-id;
               description
                 "Disk is the hardware to store information for a
                  long period, i.e., Hard Disk or Solid-State Drive.";
               leaf disk-id {
                 type string;
                 description
                   "The ID of the storage disk. It is a free form
                    identifier to identify the storage disk.";
               }
               leaf disk-usage {
                 type uint8;
                 units "percent";
                 description
                   "Specifies the percentage of disk usage";
               }
               leaf disk-space-left {
                 type uint8;
                 units "percent";
                 description
                   "Specifies the percentage of disk space left";
               }
             }
             leaf session-num {
               type uint32;
               description
                 "The total number of sessions";
             }
             leaf process-num {
               type uint32;
               description
                 "The total number of processes";
             }
             list interface {
               key interface-id;
               description
                 "The network interface for connecting a device
                  with the network.";
               leaf interface-id {
                 type string;
                 description
                   "The ID of the network interface. It is a free form

Jeong, et al.           Expires 24 November 2022               [Page 71]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

                    identifier to identify the network interface.";
               }
               leaf in-traffic-rate {
                 type uint64;
                 units "pps";
                 description
                   "The total inbound traffic rate in packets per
                    second";
               }
               leaf out-traffic-rate {
                 type uint64;
                 units "pps";
                 description
                    "The total outbound traffic rate in packets per
                     second";
               }
               leaf in-traffic-throughput {
                 type uint64;
                 units "Bps";
                 description
                   "The total inbound traffic throughput in bytes per
                    second";
               }
               leaf out-traffic-throughput {
                 type uint64;
                 units "Bps";
                 description
                   "The total outbound traffic throughput in bytes per
                    second";
               }
             }
           }
         }

         case i2nsf-system-user-activity-log {
           container i2nsf-system-user-activity-log {
             description
               "This notification is sent, if there is a new user
                activity log entry.";
             uses i2nsf-system-event-type-content;
             leaf online-duration {
               type uint32;
               units "seconds";
               description
                 "The duration of a user's activeness (stays in login)
                  during a session.";
             }
             leaf logout-duration {

Jeong, et al.           Expires 24 November 2022               [Page 72]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

               type uint32;
               units "seconds";
               description
                 "The duration of a user's inactiveness (not in login)
                  from the last session.";
             }
             container additional-info {
               leaf type {
                 type enumeration {
                   enum successful-login {
                     description
                       "The user has succeeded in login.";
                   }
                   enum failed-login {
                     description
                       "The user has failed in login (e.g., wrong
                        password)";
                   }
                   enum logout {
                     description
                       "The user has succeeded in logout";
                   }
                   enum successful-password-changed {
                     description
                       "The password has been changed successfully";
                   }
                   enum failed-password-changed {
                     description
                       "The attempt to change password has failed";
                   }
                   enum lock {
                     description
                       "The user has been locked. A locked user cannot
                        login.";
                   }
                   enum unlock {
                     description
                       "The user has been unlocked.";
                   }
                 }
                 description
                   "User activities, e.g., Successful User Login,
                    Failed Login attempts, User Logout, Successful User
                    Password Change, Failed User Password Change, User
                    Lockout, User Unlocking, and Unknown.";
               }
               leaf cause {
                 type string;

Jeong, et al.           Expires 24 November 2022               [Page 73]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

                 description
                   "The cause of a failed user activity related to the
                    type of user activity. For example, when the 'type'
                    is failed-login, the value of this attribute can be
                    'Failed login attempt due to wrong password
                    entry'.";
               }
               description
                 "The additional information about user activity.";
             }
           }
         }
         case i2nsf-nsf-log-dpi {
           if-feature "i2nsf-nsf-log-dpi";
           container i2nsf-nsf-log-dpi {
             description
               "This notification is sent, if there is a new DPI
                event in the NSF log.";
             leaf attack-type {
               type identityref {
                 base dpi-type;
               }
               description
                 "The type of the DPI";
             }
             uses i2nsf-nsf-event-type-content-extend;
             uses action;
           }
         }
       }
     }

     notification i2nsf-nsf-event {
       description
         "Notification for I2NSF NSF Event. This notification provides
          specific information that can only be provided by an NSF
          that supports additional features (e.g., DDoS attack
          detection).";

       uses common-monitoring-data;
       uses message;
       uses characteristics-extended;

       choice sub-event-type {
         description
         "This choice must be augmented with cases for each allowed
          sub-event. Only 1 sub-event will be instantiated in each
          i2nsf-event message. Each case is expected to define one

Jeong, et al.           Expires 24 November 2022               [Page 74]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

          container with all the sub-event fields.";
         case i2nsf-nsf-detection-ddos {
           if-feature "i2nsf-nsf-detection-ddos";
           container i2nsf-nsf-detection-ddos {
             description
               "This notification is sent, when a specific flood type
                is detected.";
             leaf attack-type {
               type identityref {
                 base ddos-type;
               }
               description
                 "Any one of Syn flood, ACK flood, SYN-ACK flood,
                  FIN/RST flood, TCP Connection flood, UDP flood,
                  ICMP (i.e., ICMPv4 or ICMPv6) flood, HTTP flood,
                  HTTPS flood, DNS query flood, DNS reply flood, SIP
                  flood, etc.";
             }
             leaf start-time {
               type yang:date-and-time;
               mandatory true;
               description
                 "The time stamp indicating when the attack started";
             }
             leaf end-time {
               type yang:date-and-time;
               description
                 "The time stamp indicating when the attack ended. If
                  the attack is still undergoing when sending out the
                  notification, this field can be omitted.";
             }
             leaf-list attack-src-ip {
               type inet:ip-address-no-zone;
               description
                 "The source IPv4 or IPv6 addresses of attack
                  traffic. It can hold multiple IPv4 or IPv6
                  addresses. Note that all IP addresses should not be
                  included, but only limited IP addresses are included
                  to conserve the server resources. The listed attacking
                  IP addresses can be an arbitrary sampling of the
                  'top talkers', i.e., the attackers that send the
                  highest amount of traffic.";
             }
             leaf-list attack-dst-ip {
               type inet:ip-address-no-zone;
               description
                 "The destination IPv4 or IPv6 addresses of attack
                  traffic. It can hold multiple IPv4 or IPv6

Jeong, et al.           Expires 24 November 2022               [Page 75]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

                  addresses.";
             }
             leaf-list attack-src-port {
               type inet:port-number;
               description
                 "The transport-layer source ports of the DDoS attack.
                  Note that not all ports will have been seen on all the
                  corresponding source IP addresses.";
             }
             leaf-list attack-dst-port {
               type inet:port-number;
               description
                 "The transport-layer destination ports of the DDoS
                  attack. Note that not all ports will have been seen
                  on all the corresponding destination IP addresses.";
             }
             leaf rule-name {
               type leafref {
                 path
                   "/i2nsfnfi:i2nsf-security-policy"
                  +"/i2nsfnfi:rules/i2nsfnfi:name";
               }
               mandatory true;
               description
                 "The name of the I2NSF Policy Rule being triggered";
             }

             uses attack-rates;
           }
         }
         case i2nsf-nsf-detection-virus {
           if-feature "i2nsf-nsf-detection-virus";
           container i2nsf-nsf-detection-virus {
             description
               "This notification is sent, when a virus is detected.";
             uses i2nsf-nsf-event-type-content-extend;
             leaf virus-name {
               type string;
               description
                 "The name of the detected virus";
             }
             leaf virus-type {
               type identityref {
                 base virus-type;
               }
               description
                 "The virus type of the detected virus";
             }

Jeong, et al.           Expires 24 November 2022               [Page 76]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

             leaf host {
               type union {
                 type string;
                 type inet:ip-address-no-zone;
               }
               description
                 "The name or IP address of the host/device. This is
                  used to identify the host/device that is infected by
                  the virus. If the given name is not an IP address, the
                  name can be an arbitrary string including a FQDN
                  (Fully Qualified Domain Name). The name MUST be unique
                  in the scope of management domain for identifying the
                  device that has been infected with a virus.";
             }
             leaf file-type {
               type string;
               description
                 "The type of a file (indicated by the file's suffix,
                  e.g., .exe) where virus code is found (if
                  applicable).";
             }
             leaf file-name {
               type string;
               description
                 "The name of file virus code is found in (if
                  applicable).";
             }
             leaf os {
               type string;
               description
                 "The operating system of the device.";
             }
           }
         }
         case i2nsf-nsf-detection-intrusion {
           if-feature "i2nsf-nsf-detection-intrusion";
           container i2nsf-nsf-detection-intrusion {
             description
               "This notification is sent, when an intrusion event
                is detected.";
             uses i2nsf-nsf-event-type-content-extend;
             leaf protocol {
               type identityref {
                 base transport-protocol;
               }
               description
                 "The transport protocol type for
                  nsf-detection-intrusion notification";

Jeong, et al.           Expires 24 November 2022               [Page 77]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

             }
             leaf app {
               type identityref {
                 base application-protocol;
               }
               description
                 "The employed application layer protocol";
             }
             leaf attack-type {
               type identityref {
                 base intrusion-attack-type;
               }
               description
                 "The sub attack type for intrusion attack";
             }
           }
         }
         case i2nsf-nsf-detection-web-attack {
           if-feature "i2nsf-nsf-detection-web-attack";
           container i2nsf-nsf-detection-web-attack {
             description
               "This notification is sent, when an attack event is
                detected.";
             uses i2nsf-nsf-event-type-content-extend;
             leaf attack-type {
               type identityref {
                 base web-attack-type;
               }
               description
                 "Concrete web attack type, e.g., SQL injection,
                  command injection, XSS, and CSRF.";
             }
             leaf req-method {
               type identityref {
                 base req-method;
               }
               description
                 "The HTTP method of the request, e.g., PUT or GET.";
               reference
                 "draft-ietf-httpbis-semantics-19: HTTP Semantics -
                  Request Methods";
             }
             leaf req-target {
               type string;
               description
                 "The HTTP Request Target. This field can be filled in
                  the format of origin-form, absolute-form,
                  authority-form, or asterisk-form";

Jeong, et al.           Expires 24 November 2022               [Page 78]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

               reference
                 "draft-ietf-httpbis-messaging-19: HTTP/1.1 - Request
                  Target";
             }
             leaf-list filtering-type {
               type identityref {
                 base filter-type;
               }
               description
                 "URL filtering type, e.g., deny-list, allow-list,
                  and Unknown";
             }
             leaf cookies {
               type string;
               description
                 "The HTTP Cookies header field of the request from
                  the user agent. Note that though cookies have many
                  historical infelicities that degrade security and
                  privacy, the Cookie and Set-Cookie header fields are
                  widely used on the Internet. Thus, the cookie
                  information needs to be kept confidential and is NOT
                  RECOMMENDED to be included in the monitoring data
                  unless the information is absolutely necessary to help
                  to enhance the security of the network.";
               reference
                 "RFC 6265: HTTP State Management Mechanism - Cookie";
             }
             leaf req-host {
               type string;
               description
                 "The HTTP Host header field of the request";
               reference
                 "draft-ietf-httpbis-semantics-19: HTTP Semantics - Host";
             }
             leaf response-code {
               type string;
               description
                 "The HTTP Response status code";
               reference
                 "IANA Website: Hypertext Transfer Protocol (HTTP)
                  Status Code Registry";
             }
           }
         }
         case i2nsf-nsf-detection-voip-vocn {
           if-feature "i2nsf-nsf-detection-voip-vocn";
           container i2nsf-nsf-detection-voip-vocn {
             description

Jeong, et al.           Expires 24 November 2022               [Page 79]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

               "This notification is sent, when a VoIP/VoCN violation
                is detected.";
             uses i2nsf-nsf-event-type-content-extend;
             leaf-list source-voice-id {
               type string;
               description
                 "The detected source voice ID for VoIP and VoCN that
                  violates the security policy.";
             }
             leaf-list destination-voice-id {
               type string;
               description
                 "The detected destination voice ID for VoIP and VoCN
                  that violates the security policy.";
             }
             leaf-list user-agent {
               type string;
               description
                 "The detected user-agent for VoIP and VoCN that
                  violates the security policy.";
             }
           }
         }
       }
     }
     /*
      * Data nodes
      */
     container i2nsf-counters {
       config false;
       description
         "The state data representing continuous value changes of
          information elements that occur very frequently. The value
          should be calculated from the start of the service of the
          NSF.";

       uses common-monitoring-data;
       uses timestamp;
       uses characteristics;

       list system-interface {
         key interface-name;
         description
           "Interface counters provide the visibility of traffic into
            and out of an NSF, and bandwidth usage.";
         uses i2nsf-system-counter-type-content;
       }
       list nsf-firewall {

Jeong, et al.           Expires 24 November 2022               [Page 80]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

         key policy-name;
         description
           "Firewall counters provide visibility into traffic signatures
            and bandwidth usage that correspond to the policy that is
            configured in a firewall.";
         leaf in-interface {
           type if:interface-ref;
           description
             "Inbound interface of the traffic";
         }
         leaf out-interface {
           type if:interface-ref;
           description
             "Outbound interface of the traffic";
         }
         uses i2nsf-nsf-counters-type-content;
         uses traffic-rates;
       }
       list nsf-policy-hits {
         key policy-name;
         description
           "Policy hit counters record the number of hits that traffic
            packets match a security policy. It can check if policy
            configurations are correct or not.";
         uses i2nsf-nsf-counters-type-content;
         leaf discontinuity-time {
           type yang:date-and-time;
           mandatory true;
           description
             "The time on the most recent occasion at which any one or
              more of the counters suffered a discontinuity. If no such
              discontinuities have occurred since the last
              re-initialization of the local management subsystem, then
              this node contains the time the local management subsystem
              was re-initialized.";
         }
         leaf hit-times {
           type yang:counter64;
           description
             "The number of times that the security policy matches the
              specified traffic.";
         }
       }
     }

     container i2nsf-monitoring-configuration {
       description
         "The container for configuring I2NSF monitoring.";

Jeong, et al.           Expires 24 November 2022               [Page 81]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       container i2nsf-system-detection-alarm {
         description
           "The container for configuring I2NSF system-detection-alarm
            notification";
         uses enable-notification;
         list system-alarm {
           key alarm-type;
           description
             "Configuration for system alarm (i.e., CPU, Memory, and
              Disk Usage)";
           leaf alarm-type {
             type enumeration {
               enum cpu {
                 description
                   "To configure the CPU usage threshold to trigger the
                    cpu-alarm";
               }
               enum memory {
                 description
                   "To configure the Memory usage threshold to trigger
                    the memory-alarm";
               }
               enum disk {
                 description
                   "To configure the Disk (storage) usage threshold to
                    trigger the disk-alarm";
               }
             }
             description
               "Type of alarm to be configured. The three alarm-types
                defined here are used to configure the threshold of the
                monitoring notification. The threshold is used to
                determine when the notification should be sent.
                The other two alarms defined in the module (i.e.,
                hardware-alarm and interface-alarm) do not use any
                threshold value to create a notification. These alarms
                detect a failure or a change of state to create a
                notification.";
           }
           leaf threshold {
             type uint8 {
               range "1..100";
             }
             units "percent";
             description
               "The configuration for threshold percentage to trigger
                the alarm. The alarm will be triggered if the usage
                is exceeded the threshold.";

Jeong, et al.           Expires 24 November 2022               [Page 82]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

           }
           uses dampening;
         }
       }
       container i2nsf-system-detection-event {
         description
           "The container for configuring I2NSF system-detection-event
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-traffic-flows {
         description
           "The container for configuring I2NSF traffic-flows
            notification";
         uses dampening;
         uses enable-notification;
       }
       container i2nsf-nsf-detection-ddos {
         if-feature "i2nsf-nsf-detection-ddos";
         description
           "The container for configuring I2NSF nsf-detection-ddos
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-nsf-detection-virus {
         if-feature "i2nsf-nsf-detection-virus";
         description
           "The container for configuring I2NSF nsf-detection-virus
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-nsf-detection-session-table {
         description
           "The container for configuring I2NSF nsf-detection-session-
            table notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-nsf-detection-intrusion {
         if-feature "i2nsf-nsf-detection-intrusion";
         description
           "The container for configuring I2NSF nsf-detection-intrusion
            notification";
         uses enable-notification;
         uses dampening;

Jeong, et al.           Expires 24 November 2022               [Page 83]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

       }
       container i2nsf-nsf-detection-web-attack {
         if-feature "i2nsf-nsf-detection-web-attack";
         description
           "The container for configuring I2NSF nsf-detection-web-attack
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-nsf-detection-voip-vocn {
         if-feature "i2nsf-nsf-detection-voip-vocn";
         description
           "The container for configuring I2NSF nsf-detection-voip-vocn
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-nsf-system-access-log {
         description
           "The container for configuring I2NSF system-access-log
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-system-res-util-log {
         description
           "The container for configuring I2NSF system-res-util-log
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-system-user-activity-log {
         description
           "The container for configuring I2NSF system-user-activity-log
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-nsf-log-dpi {
         if-feature "i2nsf-nsf-log-dpi";
         description
           "The container for configuring I2NSF nsf-log-dpi
            notification";
         uses enable-notification;
         uses dampening;
       }
       container i2nsf-counter {
         description

Jeong, et al.           Expires 24 November 2022               [Page 84]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

           "This is used to configure the counters
            for monitoring an NSF";
         leaf period {
           type uint16;
           units "minutes";
           default 0;
           description
             "The configuration for the period interval of reporting
              the counter. If 0, then the counter period is disabled.
              If value is not 0, then the counter will be reported
              following the period value.";
         }
       }
     }
   }
   <CODE ENDS>

                     Figure 2: Data Model of Monitoring

9.  I2NSF Event Stream

   This section discusses the NETCONF event stream for an I2NSF NSF
   Monitoring subscription.  The YANG module in this document supports
   "ietf-subscribed-notifications" YANG module [RFC8639] for
   subscription.  The reserved event stream name for this document is
   "I2NSF-Monitoring".  The NETCONF Server (e.g., an NSF) MUST support
   "I2NSF-Monitoring" event stream for an NSF data collector (e.g.,
   Security Controller).  The "I2NSF-Monitoring" event stream contains
   all I2NSF events described in this document.

   The following XML example shows the capabilities of the event streams
   generated by an NSF (e.g., "NETCONF" and "I2NSF-Monitoring" event
   streams) for the subscription of an NSF data collector.  Refer to
   [RFC5277] for more detailed explanation of Event Streams.  The XML
   examples in this document follow the line breaks as per [RFC8792].

Jeong, et al.           Expires 24 November 2022               [Page 85]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   <?xml version="1.0" encoding="UTF-8"?>
   <rpc-reply message-id="1"
              xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
     <data>
       <netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
         <streams>
           <stream>
             <name>NETCONF</name>
             <description>Default NETCONF Event Stream</description>
             <replaySupport>false</replaySupport>
           </stream>
           <stream>
             <name>I2NSF-Monitoring</name>
             <description>I2NSF Monitoring Event Stream</description>
             <replaySupport>true</replaySupport>
             <replayLogCreationTime>
               2021-04-29T09:37:39+00:00
             </replayLogCreationTime>
           </stream>
         </streams>
       </netconf>
     </data>
   </rpc-reply>

      Figure 3: Example of NETCONF Server supporting I2NSF-Monitoring
                                Event Stream

10.  XML Examples for I2NSF NSF Monitoring

   This section shows XML examples of I2NSF NSF Monitoring data
   delivered via Monitoring Interface from an NSF.  The XML examples are
   following the guidelines from [RFC6241] [RFC7950].

10.1.  I2NSF System Detection Alarm

   The following example shows an alarm triggered by Memory Usage on the
   server; this example XML file is delivered by an NSF to an NSF data
   collector:

Jeong, et al.           Expires 24 November 2022               [Page 86]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

 <?xml version="1.0" encoding="UTF-8"?>
 <notification
  xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0">
   <eventTime>2021-04-29T07:43:52.181088+00:00</eventTime>
   <i2nsf-event
    xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-monitoring-interface">
     <acquisition-method>subscription</acquisition-method>
     <emission-type>on-change</emission-type>
     <dampening-type>on-repetition</dampening-type>
     <language>en-US</language>
     <i2nsf-system-detection-alarm>
       <alarm-category>memory-alarm</alarm-category>
       <usage>91</usage>
       <threshold>90</threshold>
       <message>Memory Usage Exceeded the Threshold</message>
       <nsf-name>time_based_firewall</nsf-name>
       <severity>high</severity>
     </i2nsf-system-detection-alarm>
   </i2nsf-event>
 </notification>

     Figure 4: Example of I2NSF System Detection Alarm triggered by
                              Memory Usage

   The XML data above shows:

   1.  The NSF that sends the information is named
       "time_based_firewall".

   2.  The memory usage of the NSF triggered the alarm.

   3.  The monitoring information is received by subscription method.

   4.  The monitoring information is emitted "on-change".

   5.  The monitoring information is dampened "on-repetition".

   6.  The memory usage of the NSF is 91 percent.

   7.  The memory threshold to trigger the alarm is 90 percent.

   8.  The severity level of the notification is high.

Jeong, et al.           Expires 24 November 2022               [Page 87]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

10.2.  I2NSF Interface Counters

   To get the I2NSF system interface counters information by query,
   NETCONF Client (e.g., NSF data collector) needs to initiate GET
   connection with NETCONF Server (e.g., NSF).  The following XML file
   can be used to get the state data and filter the information.

<?xml version="1.0" encoding="UTF-8"?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <get>
    <filter
    xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-monitoring-interface">
      <i2nsf-counters>
        <system-interface/>
      </i2nsf-counters>
    </filter>
  </get>
</rpc>

  Figure 5: XML Example for NETCONF GET with System Interface Filter

   The following XML file shows the reply from the NETCONF Server (e.g.,
   NSF):

Jeong, et al.           Expires 24 November 2022               [Page 88]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="1"
           xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <data>
    <i2nsf-counters
    xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-monitoring-interface">
      <acquisition-method>query</acquisition-method>
      <system-interface>
        <discontinuity-time>
          2021-04-29T08:43:52.181088+00:00
        </discontinuity-time>
        <interface-name>ens3</interface-name>
        <in-total-traffic-bytes>549050</in-total-traffic-bytes>
        <out-total-traffic-bytes>814956</out-total-traffic-bytes>
        <in-drop-traffic-bytes>0</in-drop-traffic-bytes>
        <out-drop-traffic-bytes>5078</out-drop-traffic-bytes>
        <nsf-name>time_based_firewall</nsf-name>
      </system-interface>
      <system-interface>
        <discontinuity-time>
          2021-04-29T08:43:52.181088+00:00
        </discontinuity-time>
        <interface-name>lo</interface-name>
        <in-total-traffic-bytes>48487</in-total-traffic-bytes>
        <out-total-traffic-bytes>48487</out-total-traffic-bytes>
        <in-drop-traffic-bytes>0</in-drop-traffic-bytes>
        <out-drop-traffic-bytes>0</out-drop-traffic-bytes>
        <nsf-name>time_based_firewall</nsf-name>
      </system-interface>
    </i2nsf-counters>
  </data>
</rpc-reply>

 Figure 6: Example of I2NSF System Interface Counters XML Information

11.  IANA Considerations

   This document requests IANA to register the following URI in the
   "IETF XML Registry" [RFC3688]:

     URI: urn:ietf:params:xml:ns:yang:ietf-i2nsf-monitoring-interface
     Registrant Contact: The IESG.
     XML: N/A; the requested URI is an XML namespace.

   This document requests IANA to register the following YANG module in
   the "YANG Module Names" registry [RFC7950][RFC8525]:

Jeong, et al.           Expires 24 November 2022               [Page 89]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

  name: ietf-i2nsf-monitoring-interface
  namespace: urn:ietf:params:xml:ns:yang:ietf-i2nsf-monitoring-interface
  prefix: i2nsfmi
  reference: RFC XXXX

  // RFC Ed.: replace XXXX with an actual RFC number and remove
  // this note.

12.  Security Considerations

   The YANG module described in this document defines a schema for data
   that is designed to be accessed via network management protocols such
   as NETCONF [RFC6241] or RESTCONF [RFC8040].  The lowest NETCONF layer
   is the secure transport layer, and the required secure transport is
   Secure Shell (SSH) [RFC6242].  The lowest RESTCONF layer is HTTPS,
   and the required secure transport is TLS [RFC8446].

   The NETCONF access control model [RFC8341] provides a means of
   restricting access by specific NETCONF or RESTCONF users to a
   preconfigured subset of all available NETCONF or RESTCONF protocol
   operations and content.

   All data nodes defined in the YANG module which can be created,
   modified and deleted (i.e., config true, which is the default) are
   considered sensitive as they all could potentially impact security
   monitoring and mitigation activities.  Write operations (e.g., edit-
   config) applied to these data nodes without proper protection could
   result in missed alarms or incorrect alarms information being
   returned to the NSF data collector.  The following are threats that
   need to be considered and mitigated:

   Compromised NSF with valid credentials:  It can send falsified
      information to the NSF data collector to mislead detection or
      mitigation activities; and/or to hide activity.  Currently, there
      is no in-framework mechanism to mitigate this and it is an issue
      for all monitoring infrastructures.  It is important to keep
      confidential information from unauthorized persons to mitigate the
      possibility of compromising the NSF with this information.

   Compromised NSF data collector with valid credentials:  It has
      visibility to all collected security alarms; the entire detection
      and mitigation infrastructure may be suspect.  It is important to
      keep confidential information from unauthorized persons to
      mitigate the possibility of compromising the NSF with this
      information.

   Impersonating NSF:  This involves a system trying to send false

Jeong, et al.           Expires 24 November 2022               [Page 90]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

      information while imitating an NSF; client authentication would
      help the NSF data collector to identify this invalid NSF in the
      "push" model (NSF-to-collector), while the "pull" model
      (collector-to-NSF) should already be addressed with the
      authentication.

   Impersonating NSF data collector:  This is a rogue NSF data collector
      with which a legitimate NSF is tricked into communicating; for
      "push" model (NSF-to-collector), it is important to have valid
      credentials, without which it should not work; for "pull" model
      (collector-to-NSF), mutual authentication should be used to
      mitigate the threat.

   In addition, to defend against the DDoS attack caused by a lot of
   NSFs sending massive notifications to the NSF data collector, the
   rate limiting or similar mechanisms should be considered in both an
   NSF and NSF data collector, whether in advance or just in the process
   of DDoS attack.

   All of the readable data nodes in this YANG module may be considered
   sensitive in some network environments.  These data nodes represent
   information consistent with the logging commonly performed in network
   and security operations.  They may reveal the specific configuration
   of a network; vulnerabilities in specific systems; and the deployed
   security controls and their relative efficacy in detecting or
   mitigating an attack.  To an attacker, this information could inform
   how to (further) compromise the network, evade detection, or confirm
   whether they have been observed by the network operator.

   Additionally, many of the data nodes in this YANG module such as
   containers "i2nsf-system-user-activity-log", "i2nsf-system-detection-
   event", and "i2nsf-nsf-detection-voip-vocn" are privacy sensitive.
   They may describe specific or aggregate user activity including
   associating user names with specific IP addresses; or users with
   specific network usage.  They may also describe the specific commands
   that were run by users and the resulting output.  Any sensitive
   information in that command input or output will be visible to the
   NSF data collector and potentially other entities, and care must be
   taken to protect the confidentiality of such data from unauthorized
   parties.

Jeong, et al.           Expires 24 November 2022               [Page 91]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

13.  Acknowledgments

   This document is a product by the I2NSF Working Group (WG) including
   WG Chairs (i.e., Linda Dunbar and Yoav Nir) and Diego Lopez.  This
   document took advantage of the review and comments from the following
   people: Roman Danyliw, Tim Bray (IANA), Kyle Rose (TSV-ART), Dale R.
   Worley (Gen-ART), Melinda Shore (SecDir), Valery Smyslov (ART-ART),
   and Tom Petch.  The authors sincerely appreciate their sincere
   efforts and kind help.

   This work was supported by Institute of Information & Communications
   Technology Planning & Evaluation (IITP) grant funded by the Korea
   MSIT (Ministry of Science and ICT) (R-20160222-002755, Cloud based
   Security Intelligence Technology Development for the Customized
   Security Service Provisioning).  This work was supported in part by
   the IITP (2020-0-00395, Standard Development of Blockchain based
   Network Management Automation Technology).  This work was supported
   in part by the MSIT under the Information Technology Research Center
   (ITRC) support program (IITP-2021-2017-0-01633) supervised by the
   IITP.

14.  Contributors

   The following are co-authors of this document:

   Chaehong Chung - Department of Electronic, Electrical and Computer
   Engineering, Sungkyunkwan University, 2066 Seobu-ro Jangan-gu, Suwon,
   Gyeonggi-do 16419, Republic of Korea, Email: darkhong@skku.edu

   Jinyong (Tim) Kim - Department of Electronic, Electrical and Computer
   Engineering, Sungkyunkwan University, 2066 Seobu-ro Jangan-gu, Suwon,
   Gyeonggi-do 16419, Republic of Korea, Email: timkim@skku.edu

   Dongjin Hong - Department of Electronic, Electrical and Computer
   Engineering, Sungkyunkwan University, 2066 Seobu-ro Jangan-gu, Suwon,
   Gyeonggi-do 16419, Republic of Korea, Email: dong.jin@skku.edu

   Dacheng Zhang - Huawei, Email: dacheng.zhang@huawei.com

   Yi Wu - Aliababa Group, Email: anren.wy@alibaba-inc.com

   Rakesh Kumar - Juniper Networks, 1133 Innovation Way, Sunnyvale, CA
   94089, USA, Email: rkkumar@juniper.net

   Anil Lohiya - Juniper Networks, Email: alohiya@juniper.net

15.  References

Jeong, et al.           Expires 24 November 2022               [Page 92]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

15.1.  Normative References

   [RFC0768]  Postel, J., "User Datagram Protocol", STD 6, RFC 768,
              DOI 10.17487/RFC0768, August 1980,
              <https://www.rfc-editor.org/info/rfc768>.

   [RFC0791]  Postel, J., "Internet Protocol", STD 5, RFC 791,
              DOI 10.17487/RFC0791, September 1981,
              <https://www.rfc-editor.org/info/rfc791>.

   [RFC0792]  Postel, J., "Internet Control Message Protocol", STD 5,
              RFC 792, DOI 10.17487/RFC0792, September 1981,
              <https://www.rfc-editor.org/info/rfc792>.

   [RFC0854]  Postel, J. and J. Reynolds, "Telnet Protocol
              Specification", STD 8, RFC 854, DOI 10.17487/RFC0854, May
              1983, <https://www.rfc-editor.org/info/rfc854>.

   [RFC0959]  Postel, J. and J. Reynolds, "File Transfer Protocol",
              STD 9, RFC 959, DOI 10.17487/RFC0959, October 1985,
              <https://www.rfc-editor.org/info/rfc959>.

   [RFC1939]  Myers, J. and M. Rose, "Post Office Protocol - Version 3",
              STD 53, RFC 1939, DOI 10.17487/RFC1939, May 1996,
              <https://www.rfc-editor.org/info/rfc1939>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC2595]  Newman, C., "Using TLS with IMAP, POP3 and ACAP",
              RFC 2595, DOI 10.17487/RFC2595, June 1999,
              <https://www.rfc-editor.org/info/rfc2595>.

   [RFC3339]  Klyne, G. and C. Newman, "Date and Time on the Internet:
              Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002,
              <https://www.rfc-editor.org/info/rfc3339>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC3877]  Chisholm, S. and D. Romascanu, "Alarm Management
              Information Base (MIB)", RFC 3877, DOI 10.17487/RFC3877,
              September 2004, <https://www.rfc-editor.org/info/rfc3877>.

Jeong, et al.           Expires 24 November 2022               [Page 93]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   [RFC4340]  Kohler, E., Handley, M., and S. Floyd, "Datagram
              Congestion Control Protocol (DCCP)", RFC 4340,
              DOI 10.17487/RFC4340, March 2006,
              <https://www.rfc-editor.org/info/rfc4340>.

   [RFC4443]  Conta, A., Deering, S., and M. Gupta, Ed., "Internet
              Control Message Protocol (ICMPv6) for the Internet
              Protocol Version 6 (IPv6) Specification", STD 89,
              RFC 4443, DOI 10.17487/RFC4443, March 2006,
              <https://www.rfc-editor.org/info/rfc4443>.

   [RFC5277]  Chisholm, S. and H. Trevino, "NETCONF Event
              Notifications", RFC 5277, DOI 10.17487/RFC5277, July 2008,
              <https://www.rfc-editor.org/info/rfc5277>.

   [RFC5321]  Klensin, J., "Simple Mail Transfer Protocol", RFC 5321,
              DOI 10.17487/RFC5321, October 2008,
              <https://www.rfc-editor.org/info/rfc5321>.

   [RFC5646]  Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying
              Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646,
              September 2009, <https://www.rfc-editor.org/info/rfc5646>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/info/rfc6241>.

   [RFC6242]  Wasserman, M., "Using the NETCONF Protocol over Secure
              Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
              <https://www.rfc-editor.org/info/rfc6242>.

   [RFC6265]  Barth, A., "HTTP State Management Mechanism", RFC 6265,
              DOI 10.17487/RFC6265, April 2011,
              <https://www.rfc-editor.org/info/rfc6265>.

   [RFC6991]  Schoenwaelder, J., Ed., "Common YANG Data Types",
              RFC 6991, DOI 10.17487/RFC6991, July 2013,
              <https://www.rfc-editor.org/info/rfc6991>.

   [RFC7011]  Claise, B., Ed., Trammell, B., Ed., and P. Aitken,
              "Specification of the IP Flow Information Export (IPFIX)
              Protocol for the Exchange of Flow Information", STD 77,
              RFC 7011, DOI 10.17487/RFC7011, September 2013,
              <https://www.rfc-editor.org/info/rfc7011>.

Jeong, et al.           Expires 24 November 2022               [Page 94]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   [RFC7950]  Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <https://www.rfc-editor.org/info/rfc7950>.

   [RFC8040]  Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <https://www.rfc-editor.org/info/rfc8040>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8200]  Deering, S. and R. Hinden, "Internet Protocol, Version 6
              (IPv6) Specification", STD 86, RFC 8200,
              DOI 10.17487/RFC8200, July 2017,
              <https://www.rfc-editor.org/info/rfc8200>.

   [RFC8329]  Lopez, D., Lopez, E., Dunbar, L., Strassner, J., and R.
              Kumar, "Framework for Interface to Network Security
              Functions", RFC 8329, DOI 10.17487/RFC8329, February 2018,
              <https://www.rfc-editor.org/info/rfc8329>.

   [RFC8340]  Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
              BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
              <https://www.rfc-editor.org/info/rfc8340>.

   [RFC8341]  Bierman, A. and M. Bjorklund, "Network Configuration
              Access Control Model", STD 91, RFC 8341,
              DOI 10.17487/RFC8341, March 2018,
              <https://www.rfc-editor.org/info/rfc8341>.

   [RFC8342]  Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K.,
              and R. Wilton, "Network Management Datastore Architecture
              (NMDA)", RFC 8342, DOI 10.17487/RFC8342, March 2018,
              <https://www.rfc-editor.org/info/rfc8342>.

   [RFC8343]  Bjorklund, M., "A YANG Data Model for Interface
              Management", RFC 8343, DOI 10.17487/RFC8343, March 2018,
              <https://www.rfc-editor.org/info/rfc8343>.

   [RFC8407]  Bierman, A., "Guidelines for Authors and Reviewers of
              Documents Containing YANG Data Models", BCP 216, RFC 8407,
              DOI 10.17487/RFC8407, October 2018,
              <https://www.rfc-editor.org/info/rfc8407>.

   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.

Jeong, et al.           Expires 24 November 2022               [Page 95]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   [RFC8525]  Bierman, A., Bjorklund, M., Schoenwaelder, J., Watsen, K.,
              and R. Wilton, "YANG Library", RFC 8525,
              DOI 10.17487/RFC8525, March 2019,
              <https://www.rfc-editor.org/info/rfc8525>.

   [RFC8639]  Voit, E., Clemm, A., Gonzalez Prieto, A., Nilsen-Nygaard,
              E., and A. Tripathy, "Subscription to YANG Notifications",
              RFC 8639, DOI 10.17487/RFC8639, September 2019,
              <https://www.rfc-editor.org/info/rfc8639>.

   [RFC8641]  Clemm, A. and E. Voit, "Subscription to YANG Notifications
              for Datastore Updates", RFC 8641, DOI 10.17487/RFC8641,
              September 2019, <https://www.rfc-editor.org/info/rfc8641>.

   [RFC8650]  Voit, E., Rahman, R., Nilsen-Nygaard, E., Clemm, A., and
              A. Bierman, "Dynamic Subscription to YANG Events and
              Datastores over RESTCONF", RFC 8650, DOI 10.17487/RFC8650,
              November 2019, <https://www.rfc-editor.org/info/rfc8650>.

   [RFC9000]  Iyengar, J., Ed. and M. Thomson, Ed., "QUIC: A UDP-Based
              Multiplexed and Secure Transport", RFC 9000,
              DOI 10.17487/RFC9000, May 2021,
              <https://www.rfc-editor.org/info/rfc9000>.

   [RFC9051]  Melnikov, A., Ed. and B. Leiba, Ed., "Internet Message
              Access Protocol (IMAP) - Version 4rev2", RFC 9051,
              DOI 10.17487/RFC9051, August 2021,
              <https://www.rfc-editor.org/info/rfc9051>.

   [I-D.ietf-httpbis-http2bis]
              Thomson, M. and C. Benfield, "HTTP/2", Work in Progress,
              Internet-Draft, draft-ietf-httpbis-http2bis-07, 24 January
              2022, <https://www.ietf.org/archive/id/draft-ietf-httpbis-
              http2bis-07.txt>.

   [I-D.ietf-httpbis-messaging]
              Fielding, R. T., Nottingham, M., and J. Reschke,
              "HTTP/1.1", Work in Progress, Internet-Draft, draft-ietf-
              httpbis-messaging-19, 12 September 2021,
              <https://www.ietf.org/archive/id/draft-ietf-httpbis-
              messaging-19.txt>.

   [I-D.ietf-httpbis-semantics]
              Fielding, R. T., Nottingham, M., and J. Reschke, "HTTP
              Semantics", Work in Progress, Internet-Draft, draft-ietf-
              httpbis-semantics-19, 12 September 2021,
              <https://www.ietf.org/archive/id/draft-ietf-httpbis-
              semantics-19.txt>.

Jeong, et al.           Expires 24 November 2022               [Page 96]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   [I-D.ietf-i2nsf-capability-data-model]
              Hares, S., Jeong, J. P., Kim, J. T., Moskowitz, R., and Q.
              Lin, "I2NSF Capability YANG Data Model", Work in Progress,
              Internet-Draft, draft-ietf-i2nsf-capability-data-model-31,
              14 May 2022, <https://www.ietf.org/archive/id/draft-ietf-
              i2nsf-capability-data-model-31.txt>.

   [I-D.ietf-i2nsf-nsf-facing-interface-dm]
              Kim, J. T., Jeong, J. P., Park, J., Hares, S., and Q. Lin,
              "I2NSF Network Security Function-Facing Interface YANG
              Data Model", Work in Progress, Internet-Draft, draft-ietf-
              i2nsf-nsf-facing-interface-dm-27, 14 May 2022,
              <https://www.ietf.org/archive/id/draft-ietf-i2nsf-nsf-
              facing-interface-dm-27.txt>.

   [I-D.ietf-tcpm-rfc793bis]
              Eddy, W. M., "Transmission Control Protocol (TCP)
              Specification", Work in Progress, Internet-Draft, draft-
              ietf-tcpm-rfc793bis-28, 7 March 2022,
              <https://www.ietf.org/archive/id/draft-ietf-tcpm-
              rfc793bis-28.txt>.

   [I-D.ietf-tsvwg-rfc4960-bis]
              Stewart, R. R., Tüxen, M., and K. E. E. Nielsen, "Stream
              Control Transmission Protocol", Work in Progress,
              Internet-Draft, draft-ietf-tsvwg-rfc4960-bis-19, 5
              February 2022, <https://www.ietf.org/archive/id/draft-
              ietf-tsvwg-rfc4960-bis-19.txt>.

15.2.  Informative References

   [RFC0826]  Plummer, D., "An Ethernet Address Resolution Protocol: Or
              Converting Network Protocol Addresses to 48.bit Ethernet
              Address for Transmission on Ethernet Hardware", STD 37,
              RFC 826, DOI 10.17487/RFC0826, November 1982,
              <https://www.rfc-editor.org/info/rfc826>.

   [RFC4861]  Narten, T., Nordmark, E., Simpson, W., and H. Soliman,
              "Neighbor Discovery for IP version 6 (IPv6)", RFC 4861,
              DOI 10.17487/RFC4861, September 2007,
              <https://www.rfc-editor.org/info/rfc4861>.

   [RFC4949]  Shirey, R., "Internet Security Glossary, Version 2",
              FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007,
              <https://www.rfc-editor.org/info/rfc4949>.

Jeong, et al.           Expires 24 November 2022               [Page 97]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   [RFC8792]  Watsen, K., Auerswald, E., Farrel, A., and Q. Wu,
              "Handling Long Lines in Content of Internet-Drafts and
              RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020,
              <https://www.rfc-editor.org/info/rfc8792>.

   [I-D.ietf-i2nsf-consumer-facing-interface-dm]
              Jeong, J. P., Chung, C., Ahn, T., Kumar, R., and S. Hares,
              "I2NSF Consumer-Facing Interface YANG Data Model", Work in
              Progress, Internet-Draft, draft-ietf-i2nsf-consumer-
              facing-interface-dm-19, 18 May 2022,
              <https://www.ietf.org/archive/id/draft-ietf-i2nsf-
              consumer-facing-interface-dm-19.txt>.

   [IANA-HTTP-Status-Code]
              Internet Assigned Numbers Authority (IANA), "Hypertext
              Transfer Protocol (HTTP) Status Code Registry", September
              2018, <https://www.iana.org/assignments/http-status-codes/
              http-status-codes.xhtml>.

   [IEEE-802.1AB]
              Institute of Electrical and Electronics Engineers, "IEEE
              Standard for Local and metropolitan area networks -
              Station and Media Access Control Connectivity Discovery",
              March 2016,
              <https://ieeexplore.ieee.org/document/7433915>.

Appendix A.  Changes from draft-ietf-i2nsf-nsf-monitoring-data-model-18

   The following changes are made from draft-ietf-i2nsf-nsf-monitoring-
   data-model-18:

   *  The YANG module's prefix is updated from 'nsfmi' to 'i2nsfmi'.

   *  The YANG module's name is updated from 'ietf-i2nsf-nsf-monitoring'
      to 'ietf-i2nsf-monitoring-interface'.

Authors' Addresses

   Jaehoon Paul Jeong (editor)
   Department of Computer Science and Engineering
   Sungkyunkwan University
   2066 Seobu-Ro, Jangan-Gu
   Suwon
   Gyeonggi-Do
   16419
   Republic of Korea
   Phone: +82 31 299 4957
   Email: pauljeong@skku.edu

Jeong, et al.           Expires 24 November 2022               [Page 98]
Internet-Draft  NSF Monitoring Interface YANG Data Model        May 2022

   URI:   http://iotlab.skku.edu/people-jaehoon-jeong.php

   Patrick Lingga
   Department of Electrical and Computer Engineering
   Sungkyunkwan University
   2066 Seobu-Ro, Jangan-Gu
   Suwon
   Gyeonggi-Do
   16419
   Republic of Korea
   Phone: +82 31 299 4957
   Email: patricklink@skku.edu

   Susan Hares
   Huawei
   7453 Hickory Hill
   Saline, MI 48176
   United States of America
   Phone: +1-734-604-0332
   Email: shares@ndzh.com

   Liang Frank Xia
   Huawei
   101 Software Avenue, Yuhuatai District
   Nanjing
   Jiangsu,
   China
   Email: Frank.xialiang@huawei.com

   Henk Birkholz
   Fraunhofer Institute for Secure Information Technology
   Rheinstrasse 75
   64295 Darmstadt
   Germany
   Email: henk.birkholz@sit.fraunhofer.de

Jeong, et al.           Expires 24 November 2022               [Page 99]