Routing Over Low power and Lossy networks (roll)
|WG||Name||Routing Over Low power and Lossy networks|
|Area||Routing Area (rtg)|
|Dependencies||Document dependency graph (SVG)|
Peter Van der Stok
|Jabber chat||Room address||xmpp:firstname.lastname@example.org?join|
Charter for Working Group
Low power and Lossy Networks (LLNs ) are made up of many embedded
devices with limited power, memory, and processing resources. They are
interconnected by a variety of links, such as IEEE 802.15.4, Bluetooth,
Low Power WiFi, wired or other low power PLC (Powerline Communication)
links. LLNs are transitioning to an end-to-end IP-based solution to
avoid the problem of non-interoperable networks interconnected by
protocol translation gateways and proxies.
RFC7102 discusses ROLL specific aspects of LLNs, and RFC7228 provides
additional terminology for constrained devices. RFC 5548, 5673, 5826,
and 5876 describe the requirements for LLNs from several application
The Working Group has focused on routing solutions for the areas:
connected home, building, and urban sensor networks. It has developed a
Framework that takes into consideration various aspects including high
reliability in the presence of time varying loss characteristics and
connectivity while permitting low-power operation with very modest
memory and CPU pressure in networks potentially comprising a very large
number (several thousands) of nodes.
The Working Group continues to focus on routing issues for LLN and to
maintain, improve and streamline the protocols already developed,
including RPL and MPL. The focus is on IPv6 work only. The Working Group
will pay particular attention to routing security and manageability
(e.g., self-configuration) issues. The working group will consider the
transport characteristics that routing protocol messages will
ROLL will coordinate closely with the working groups in other areas that
focus on constrained networks and/or constrained nodes, such as 6lo,
6tisch, ipwave, lwig and CoRE. Other working groups such as pim, bier
and manet will be consulted as needed. The Working group will align with
the 6man WG when needed.
Work Items are:
- Guidance in using RFC6553, RFC6554, and IPv6-in-IPv6 encapsulation.
- Additional protocol elements to reduce packet size and the amount of
required routing states
- Automatic selection of MPL forwarders to reduce message replication.
- Data models for RPL and MPL management.
- Multicast enhancements algorithms.
|Sep 2018||Recharter WG or close|
|Jul 2018||Initial submission of a solution to the problems due to the use of No-Path DAO Messages to the IESG|
|Nov 2017||Initial submission of a proposal to augment DIS flags and options to the IESG|
|Nov 2017||Initial submission of a reactive P2P route discovery mechanism based on AODV-RPL protocol to the IESG|
|Jul 2017||Initial submission of a Forwarder Selection Protocol for MPL to the IESG|
|Jul 2017||Initial submission of a proposal for Source-Route Multicast for RPL to the IESG|
|Mar 2017||Initial submission of a root initiated routing state in RPL to the IESG|
|Mar 2017||Initial submission of a YANG model for MPL to the IESG|
|Jan 2017||Initial Submission of a proposal with uses cases for RPI, RH3 and IPv6-in-IPv6 encapsulation to the IESG|