Routing Over Low power and Lossy networks (roll)

WG Name Routing Over Low power and Lossy networks
Acronym roll
Area Routing Area (rtg)
State Active
Charter charter-ietf-roll-05 Approved
Status Update Show update (last changed 2019-11-08)
Dependencies Document dependency graph (SVG)
Additional Resources
- Issue tracker
- Wiki
Personnel Chairs Dominique Barthel 
Ines Robles 
Area Director Alvaro Retana 
Secretary Michael Richardson 
Delegates Robert Cragie 
Yvonne-Anne Pignolet 
Liaison Contacts Dominique Barthel 
Ines Robles 
Mailing list Address
To subscribe
Jabber chat Room address

Charter for Working Group

Low power and Lossy Networks (LLNs ) are made up of many embedded
devices with limited power, memory, and processing resources. They are
interconnected by a variety of links, such as IEEE 802.15.4, Bluetooth,
Low Power WiFi, wired or other low power PLC (Powerline Communication)
links. LLNs are transitioning to an end-to-end IP-based solution to
avoid the problem of non-interoperable networks interconnected by
protocol translation gateways and proxies.

RFC7102 discusses ROLL specific aspects of LLNs, and RFC7228 provides
additional terminology for constrained devices. RFC 5548, 5673, 5826,
and 5876 describe the requirements for LLNs from several application

The Working Group has focused on routing solutions for the areas:
connected home, building, and urban sensor networks. It has developed a
Framework that takes into consideration various aspects including high
reliability in the presence of time varying loss characteristics and
connectivity while permitting low-power operation with very modest
memory and CPU pressure in networks potentially comprising a very large
number (several thousands) of nodes.

The Working Group continues to focus on routing issues for LLN and to
maintain, improve and streamline the protocols already developed,
including RPL and MPL. The focus is on IPv6 work only. The Working Group
will pay particular attention to routing security and manageability
(e.g., self-configuration) issues. The working group will consider the
transport characteristics that routing protocol messages will

ROLL will coordinate closely with the working groups in other areas that
focus on constrained networks and/or constrained nodes, such as 6lo,
6tisch, ipwave, lwig and CoRE. Other working groups such as pim, bier
and manet will be consulted as needed. The Working group will align with
the 6man WG when needed.

Work Items are:

- Guidance in using RFC6553, RFC6554, and IPv6-in-IPv6 encapsulation.

- Additional protocol elements to reduce packet size and the amount of
required routing states

- Automatic selection of MPL forwarders to reduce message replication.

- Data models for RPL and MPL management.

- Multicast enhancements algorithms.


Date Milestone
1 Oct 2021 Recharter WG or close
1 Dec 2020 Initial submission of Mode of Operation extension and Capabilities for RPL to the IESG
1 Jul 2020 Initial submission of a root initiated routing state in RPL to the IESG
1 Jul 2020 Initial submission of a YANG model for MPL to the IESG
1 Jun 2020 Initial submission of Enabling secure network enrollment in RPL networks draft to the IESG
1 Jun 2020 Initial submission of a proposal to augment DIS flags and options to the IESG
1 Jun 2020 Initial submission of a proposal for Source-Route Multicast for RPL to the IESG

Done milestones

Date Milestone
Done Initial submission to the IESG of mechanism to turn on RFC8138 compression feature within a RPL network
Done Initial submission of Common Ancestor Objective Functions and Parent Set DAG Metric Container Extension to the IESG
Done Initial submission of routing for RPL Leaves draft to the IESG
Done Initial submission of a reactive P2P route discovery mechanism based on AODV-RPL protocol to the IESG
Done Initial Submission of a proposal with uses cases for RPI, RH3 and IPv6-in-IPv6 encapsulation to the IESG
Done Initial submission of a solution to the problems due to the use of No-Path DAO Messages to the IESG